Fractional Brownian Heavy Traffic Approximations of Multiclass Feedforward Queueing Networks

We consider multiclass feedforward queueing networks under first in first out and priority service disciplines driven by long-range dependent arrival and service time processes. We show that in critical loading the normalized workload, queue length and sojourn time processes can converge to a multi-dimensional reflected fractional Brownian motion. This weak heavy traffic approximation is deduced from a deterministic pathwise approximation of the network behavior close to constant critical load in terms of the solution of a Skorokhod problem. Since we model the doubly infinite time interval, our results directly cover the stationary case.AMS subject classification: primary 90B15, secondary 60K25, 68M20     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

New chiral phosphine-phosphite ligands in the enantioselective palladium-catalyzed allylic alkylation

A series of chiral phosphine-phosphite ligands 1-6 have been synthesized and used in the enantioselective palladium-catalyzed reaction of rac-1,3-diphenyl-2-propenyl acetate with dimethyl malonate as nucleophile. Ligands 1a, 2, 3, 5a, 6a, and 6b have been synthesized starting from racemic tert-butylphenylphosphinoborane. The use of dynamically resolved Li phosphide (-)-sparteine provided the optically pure ligands. Crystals of the allylpalladium (6a) complex were obtained, suitable for X-ray crystal structure determination. The X-ray crystal structure of the allylpalladium (6a) complex revealed a longer palladium-carbon bond distance trans to the phosphine moiety indicating that the attack of the nucleophile takes place at the carbon trans to the phosphine moiety. This was confirmed by the fact that the phosphine moiety did not affect the enantioselectivity directly. Under mild reaction conditions, enantioselectivities up to 83% were obtained (25 degrees C) with ligand 1e. Systematic variation of the ligand bridge and the phosphite moiety showed that the configuration of the product is controlled by the atropisomerism of the biphenyl substituent at the phosphite moiety. The conformation of the biphenyl group, in turn, is controlled by the substituent at the chiral carbon in the bridge. Ligands with large bite angles yielded higher enantioselectivities.     

Development and certification of reference materials for residues of organochlorine and organophosphorus pesticides in beef fat ACSL CRM 1 and 2

Beef fat samples were prepared and tested as candidate reference materials for organochlorine and organophosphorus pesticides. The CRMs consisted of beef fat spiked with pesticide solutions. One sample (ACSL CRM 1) was prepared containing close to 0.2 mg/kg of each of the organochlorine pesticides dieldrin and heptachlor epoxide. A second sample (ACSL CRM 2) was prepared containing close to 0.8 mg/kg of each of the organophosphorus pesticides diazinon, chlorpyrifos and ethion. The spiking levels and homogeneity of the materials were verified. The coefficients of variation of 5 analyses carried out to test between-jar homogeneity for each reference material were dieldrin, 3.5%; heptachlor epoxide, 1.1%; diazinon, 2.1%; chlorpyrifos, 1.2% and ethion, 3.1%. No instability in any of these compounds was detected over a twelve month period. The candidate reference materials were found to be suitable for certification by interlaboratory testing. The certification process was based on a two-stage nested design described in ISO Guide 35. Analysis of results reported by collaborating laboratories provided an assessment of the homogeneity of the reference materials. The certified values together with their upper and lower 95% confidence limits are: ACSL CRM 1*Dieldrin*0.199 mg/kg **(0.188, **0.210 mg/kg) *Heptachlor epoxide*0.194 mg/kg **(0.176, **0.212 mg/kg) ACSL CRM 2*Diazinon*0.805 mg/kg **(0.755, **0.855 mg/kg) *Chlorpyrifos*0.790 mg/kg **(0.728, **0.852 mg/kg) *Ethion*0.813 mg/kg **(0.746, **0.879 mg/kg). A certificate for each material was prepared according to the guidelines set out in ISO Guide 31.     

Influence of the electric field on a bio-mimetic film supported on a gold electrode

A model biological membrane was formed by fusion of mixed cholesterol and DMPC (dimyristoylphosphatidylcholine) phospholipid vesicles onto a gold-coated quartz support. The gold surface was charged and the influence of the charge at the solid support on the structure and integrity of the phospholipid bilayer was investigated using the specular reflection of neutrons and electrochemical measurements. When the surface charge density is close to zero, the lipid vesicles fuse directly on the surface to form a bilayer with a small number of defects and hence low water content. When the support's surface is negatively charged the film swells and incorporates water due to the field driven poration of the membrane. When the charge density is more negative then -8 microC cm(-2) the bilayer is detached from the metal surface. However, it remains in close proximity to the metal electrode, suspended on a thin cushion of water. The film thicknesses, calculated from neutron reflectivity, have allowed us to determine the tilt angle of the lipid molecules as a function of the support's charge density. The lipid molecules are tilted 55 degrees from the surface normal at zero charge density but become significantly more perpendicular (30 degrees tilt angle) at charge densities more negative than -8 microC cm(-2). The tilt angle measurements are in very good agreement with previous IR studies. This paper describes the highlights of a more in-depth study which is fully described in [1].     

Aminosulf(ox)ides as ligands for Iridium(I)-catalyzed asymmetric transfer hydrogenation

A new class of efficient catalysts was developed for the asymmetric transfer hydrogenation of unsymmetrical ketones. A series of chiral N,S-chelates (6-22) was synthesized to serve as ligands in the iridium(I)-catalyzed reduction of ketones. Both formic acid and 2-propanol proved to be suitable as hydrogen donors. Sulfoxidation of an (R)-cysteine-based aminosulfide provided a diastereomeric ligand family containing a chiral sulfur atom. The two chiral centers of these ligands showed a clear effect of chiral cooperativity. In addition, aminosulfides containing two asymmetric carbon atoms in the backbone were synthesized. Both the sulfoxide-containing beta-amino alcohols and the aminosulfides derived from 1,2-disubstituted amino alcohols gave rise to high reaction rates and moderate to excellent enantioselectivities in the reduction of various ketones. The enantioselective outcome of the reaction was favorably affected by selecting the most appropriate hydrogen donor. Enantioselectivities of up to 97% were reached in the reduction of aryl-alkyl ketones.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300     

Reactions of β-Pinene with Aromatic Aldehydes

Aromatic aldehydes add to β-pinene under Lewis acid catalyzed Prins reaction conditions and yield the corresponding homoallylic alcohols. The reactions proceed in poor yield when electron donating substituents are present on the aromatic ring.     

NEW SYNTHETIC ROUTE TO DIALKYLPHOSPHINIC ACIDS

Abstract

The dialkylphosphinic acids, 5a-5e, can be obtained by reacting bis(trimethylsiloxy)phosphine with the highly reactive alkyl halides, 2a-2e, in the presence of chlorotrimethylsilane and triethylamine, followed by ethanolysis of the resulting trimethylsilyl dialkylphosphinates, 4a-4e.