Averaged topological equations for dispersed two-phase flows

A general relationship between the volume fraction and the specific interfacial area for averaged dispersed two-phase flows is proposed. This relationship, expressed as a basic set of two scalar evolution equations and two vectorial non-uniformity state equations, is an analytical result obtained by a systematic approach using the derivatives of some generalized functions and a local volume-averaging technique. The proposed set of equations was expressed for measurable macroscopic parameters of the system and has the same generality as the averaged transport equations of two-phase flows. By combination of the basic set of equations, called the averaged topological equations (ATEs), second-order ATEs for the volume fraction were found. The second-order ATEs were expressed both by a Lagrangian formulation and by a Eulerian formulation. The importance and physical meaning of the ATEs developed in this study were clarified within the framework of the theory of kinematic waves.     

Hypercoulometric effect in an electron capture detector polarized with an additional voltage

Summary This paper reports measurements of the current characteristics and of the signal corresponding to a constant concentration of Freon F-11 for an electron-capture detector, supplied with a pulse voltage with a changeable pulse duration, amplitude and repetition time. It was found that an additional voltage applied to the detector cathode increased the detector signal by about 50% and that the maximal signal was observed at 5 V. The influence of the polarized voltage on the electron caputure efficiency coefficient (p) measured with two detectors in series was demonstrated and the reliability of the sample mass calculation by means of (p) is discussed.     

Model dipeptides incorporating the trans cyclohexane analogues of phenylalanine: further evidence of the relationship between side-chain orientation and β-turn type

In order to study the influence of the side-chain orientation on the peptide backbone conformation we have synthesised the model dipeptides t-BuCO-l-Pro-(1S,2R)-c₆Phe-NHMe and t-BuCO-l-Pro-(1R,2S)-c₆Phe-NHMe, incorporating each enantiomer of the trans cyclohexane analogue of phenylalanine (trans-1-amino-2-phenylcyclohexanecarboxylic acid). The orientation of the aromatic side-chain determines the β-turn type accommodated by these peptides to the point that the (1S,2R)-c₆Phe derivative retains the type I β-turn in the crystalline state, in contrast to the behaviour exhibited by the natural counterpart t-BuCO-l-Pro-l-Phe-NHMe.     

Electron capture detector performance parameters in view of the response presentation forms

Summary Four most frequently used presentation forms of the ECD response are described. Equations describing the dependence of the sensitivity, linearity and minimum detectable concentration of the ECD working under constant frequency mode of operation on the pulse period are derived from Wenthworth’s kinetic model for all four forms mentioned above. The forms presented are compared on the basis of equations derived. Results of the calculations are given and some predictions are experimentally tested for sulphur hexafluoride. Good agreement was found between the predicted and observed relationships. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Molecular Networks in Dynamic Multilevel Systems

Dynamic multilevel systems can be assembled from molecular building blocks through two or more reversible reactions that form covalent bonds. Molecular networks of dynamic multilevel systems can exhibit different connectivities between nodes. The design and creation of molecular networks in multilevel systems require control of the crossed reactivity of the functional groups (how to connect nodes) and the conditions of the reactions (when to connect nodes). In recent years, the combination of orthogonal and communicating reactions, which can be simultaneous or individually activated, has produced a variety of systems that have given rise to macrocycles and cages, as well as molecular motors and multicomponent architectures on surfaces. A given set of reactions can lead to systems with unique responsiveness, compositions, and functions as a result of the relative reactivities. In this Concept article, different molecular networks from synthetic systems that can be produced by combinations of different reaction types are discussed. Moreover, applications of this chemistry are highlighted, and future perspectives are envisioned.     

A convenient method for epichlorohydrin determination in water using headspace-solid-phase microextraction and gas chromatography

A simple procedure for epychlorohydrin determination in water is presented. In order to optimize the epichlorohydrin extraction conditions in water using headspace (HS)-solid-phase microextraction (SPME), followed by gas chromatography, an experimental design in two steps is performed. Firstly, a 2(5-2) fractional factorial design for screening the significant variables is used. Secondly, a central composite design for optimizing them is carried out. The best experimental conditions are the followings: poly(dimethysiloxane)-divinylbenzene coating fiber; 20 min extraction time; 5 degrees C extraction temperature; 300 g/L sodium chloride; and 20 mL HS volume in a 40-mL vial. Using the previous extraction conditions with gas chromatography (GC)-flame ionization detection equipment, a limit of detection (LOD) of 1.8 microg/L and a relative standard deviation (RSD) of 3.8% (for 25 microg/L) are obtained. With a GC electron capture detection equipment the RSD is 6.6% (for 5 microg/L), and the LOD found is lower (0.08 microg/L). The method is applied to the analysis of water from four treatment plants at the entrance and effluent stream. The standard addition method is used to quantitate the epichlorohydrin that is found in the raw water of the three wastewater treatment plants.     

Application of a pulse-discharge helium detector to the determination of neon in air and water

The Mitsunobu reaction was used to attach tetra-O-benzyl-D-glucopyranose to a monoindolylmaleimide, providing a key intermediate in the total synthesis of indolocarbazole topoisomerase I poisons. Using normal-phase silica gel chromatography, purification of the glycosylated product normally required multiple columns, resulting in poor recovered yields. Reversed-phase chromatography was used successfully to purify this highly hydrophobic material, rapidly and in high yield.     

Determination of fuel dialkyl ethers and BTEX in water using headspace solid-phase microextraction and gas chromatography-flame ionization detection

A simple procedure for the determination of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), ethyl butyl ether (EBE), tert-amyl methyl ether (TAME), benzene, toluene, ethylbenzene, and xylenes (BTEX) in water using headspace (HS) solid-phase microextraction (HS-SPME) was developed. The analysis was carried out by gas chromatography (GC) equipped with flame ionization detector (FID) and 100% dimethylpolysiloxane fused capillary column. A 2 Plackett-Burman design for screening and a central composite design (CCD) for optimizing the significant variables were applied. Fiber type, extraction temperature, sodium chloride concentration, and headspace volume were the significant variables. A 65 microm poly(dimethylsiloxane)-divinylbenzene (PDMS-DVB) SPME fiber, 10 degrees C, 300 g/l, and 20 ml of headspace (in 40 ml vial) were respectively chosen for the best extraction response. An extraction time of 10 min was enough to extract the ethers and BTEX. The relative standard deviation (R.S.D.) for the procedure varied from 2.6 (benzene) to 8.5% (ethylbenzene). The method detection limits (MDLs) found were from 0.02 (toluene, ethylbenzene, and xylenes) to 1.1 microg/l (MTBE). The optimized method was applied to the analysis of the rivers, marinas and fishing harbors surface waters from Gipuzkoa (North Spain). Three sampling were done in 1 year from June 2002 to June 2003. Toluene was the most detected analyte (in 90% of the samples analyzed), with an average concentration of 0.56 microg/l. MTBE was the only dialkyl ether detected (in 15% of the samples) showing two high levels over 400 microg/l that were related to accidental fuel spill.