Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

Preparation, characterization and effect of annealing on performance of cellulose acetate/sulfonated polysulfone and cellulose acetate/epoxy resin blend ultrafiltration membranes

Polymeric membranes based on cellulose acetate (CA)--sulfonated polysulfone blends at three different polymer compositions were prepared by solution blending and phase inversion technique, characterized and subjected to annealing at 70, 80 and 90 °C. The permeate water flux, separation of bovine serum albumin and its flux by the blend membranes before and after thermal treatment, have been compared and discussed. Similarly, CA and epoxy resin (diglycidyl ether of bisphenol-A) were blended in various compositions, in the presence and in the absence of polyethyleneglycol 600 as non-solvent additive, using N,N^′-dimethylformamide as solvent, and used for preparing ultraflltration membranes by phase inversion technique. The polymer blend composition, additive concentration, casting and gelation conditions were optimized. Blend membranes were characterized in terms of compaction, pure water flux, water content and membrane resistance. The effects of polymer blend composition and additive concentration on the above parameters were determined and the results are discussed.     

Fiber-optic Singlet Oxygen [1O2 (1Δg)] Generator Device Serving as a Point Selective Sterilizer

Traditionally, Type II heterogeneous photo-oxidations produce singlet oxygen via external irradiation of a sensitizer and external supply of ground-state oxygen. A potential improvement is reported here. A hollow-core fiber-optic device was developed with an “internal” supply of light and flowing oxygen, and a porous photosensitizer-end capped configuration. Singlet oxygen was delivered through the fiber tip. The singlet oxygen steady-state concentration in the immediate vicinity of the probe tip was ca 20 f m by N-benzoyl- dl -methionine trapping. The device is portable and the singlet oxygen-generating tip is maneuverable, which opened the door to simple disinfectant studies. Complete Escherichia coli inactivation was observed in 2 h when the singlet oxygen sensitizing probe tip was immersed in 0.1 mL aqueous samples of 0.1–4.4 × 10⁷ cells. Photobleaching of the probe tip occurred after ca 12 h of use, requiring baking and sensitizer reloading steps for reuse.     

Interaction of cephalosporins with outer membrane channels of Escherichia coli. Revealing binding by fluorescence quenching and ion conductance fluctuations

Outer membrane channels in gram-negative bacteria are implicated in the influx of the latest generation of cephalosporins. We have measured the interaction strengths of ceftriaxone, cefpirome and ceftazidime in the two most abundant outer membrane porins of Escherichia coli, OmpF and OmpC, by both ion current fluctuations through single protein channels and fluorescence quenching. Statistical analysis of individual antibiotic entry events in membrane-incorporated porins yielded the kinetic rates and the equilibrium binding constant of each antibiotic-porin pair. Affinity constants were independently obtained by measuring the static quenching of inherent tryptophan fluorescence in the porins in the presence of the antibiotics. Through an empirical inner filter effect correction we have succeeded in measuring the chemical interaction of these strongly absorbing antibiotics, and obtained a qualitative agreement with conductance measurements. The interaction of all three antibiotics is smaller for OmpC than OmpF, and in the case of each porin the interaction strength series ceftriaxone > cefpirome > ceftazidime is maintained.     

Investigations on PMMA-PVdF polymer blend electrolyte with esters of dibenzoic acids as plasticizers

Plasticizers can be used to change the electrical and mechanical properties of polymer electrolytes by reducing the degree of crystallinity and lowering the glass transition temperature. The transport properties of gel type ionic conducting membranes consisting of poly (methyl methacrylate) (PMMA), poly (vinylidene fluriode) (PVdF), Lithium perchlorate (LiClO₄) and dioctyl phthalate (DOP), dibutyl phthalate (DBP), dimethyl phthalate (DMP) or diethyl phthalate (DEP) were studied. The polymer films were characterized by X-ray diffraction, Thermal, Fourier transform infrared and impedance spectroscopic studies. It is found that the addition of DMP as the plasticizer in the PMMA / PVdF-LiClO₄ polymer complex favours an enhancement in ionic conductivity. The temperature dependence of the conductivity of the polymer films seems to obey the VTF relation. The conductivity values are presented and the results are discussed.     

Experimental investigations on plasticized PMMA/PVA polymer blend electrolytes

Blend based polymer electrolytes composed of poly (methyl methacrylate) (PMMA), poly(vinylalcohol) (PVA) and LiClO₄ are prepared using solvent casting technique. The polymer films are characterized by XRD and FTIR studies to determine the molecular environment for the conducting ions. These polymer films have been investigated in terms of ionic conductivity using the results of impedance studies. The influence of the blend composition on the electrochemical behaviour is also discussed. The highest room temperature conductivity obtained for the film consisting of PMMA, PVA, LiClO₄ and DMP is 0.06×10⁻³ S/cm at 303 K. The PMMA-PVA blend based polymer electrolytes look very desirable and promising for lithium battery applications.     

Purification and Characterization of Gum-Derived Polysaccharides of Moringa oleifera and Azadirachta indica and Their Applications as Plant Stimulants and Bio-Pesticidal Agents

Plant gums are bio-organic substances that are derived from the barks of trees. They are biodegradable and non-adverse complex polysaccharides that have been gaining usage in recent years due to a number of advantages they contribute to various applications. In this study, gum was collected from Moringa oleifera and Azadirachta indica trees, then dried and powdered. Characterizations of gum polysaccharides were performed using TLC, GC-MS, NMR, etc., and sugar molecules such as glucose and xylose were found to be present. Effects of the gums on Abelmoschus esculentus growth were observed through root growth, shoot growth, and biomass content. The exposure of the seeds to the plant gums led to bio stimulation in the growth of the plants. Poor quality soil was exposed to the gum polysaccharide, where the polysaccharide was found to improve soil quality, which was observed through soil analysis and SEM analysis of soil porosity and structure. Furthermore, the plant gums were also found to have bio-pesticidal activity against mealybugs, which showed certain interstitial damage evident through histopathological analysis.     

Synthesis of new dibenzo nitrogen-oxygen donor macrocycles containing two amide groups

Four new nitrogen-oxygen, dibenzo macrocyclic ligands containing two amide groups have been prepared by combining a dibenzo-containing diamidodialdehyde with an appropriate diamine followed by reduction of the intermediate bis Schiff-base. The starting dibenzo-containing diamidodialdehyde was prepared by treating 2 equivalents of salicylaldehyde with a bis(α-chloroamide).     

A reinvestigation of the reaction between titanium(iv) and salicylic acid in concentrated sulphuric acid

It is shown that the coloured species formed between TiO(2+) and salicylic acid in concentrated sulphuric acid may be a pi-complex rather than a chelate. Similar species are formed by other hydroxybenzoic acids where chelating sites for TiO(2+) are not available. The ultraviolet and NMR spectral characteristics of hydroxybenzoic acids in water, concentrated sulphuric acid and deuterochloroform are presented as evidence for the pi-complex formation. The reaction of VO(2+) with salicylic acid in concentrated sulphuric acid is shown to be due to increasing electron-donation in the pi-component of the V-O bond of VO(H(2)O)(5)(2+) as the concentration of sulphuric acid is increased, and not to the presence of salicylic acid.