Generation of Voronoi Grid Based on Vorticity for Coarse-Scale Modeling of Flow in Heterogeneous Formations

We present a novel unstructured coarse grid generation technique based on vorticity for upscaling two-phase flow in permeable media. In the technique, the fineness of the gridblocks throughout the domain is determined by vorticity distribution such that where the larger is the vorticity at a region, the finer are the gridblocks at that region. Vorticity is obtained from single-phase flow on original fine grid, and is utilized to generate a background grid which stores spacing parameter, and is used to steer generation of triangular and finally Voronoi grids. This technique is applied to two channelized and heterogeneous models and two-phase flow simulations are performed on the generated coarse grids and, the results are compared with the ones of fine scale grid and uniformly gridded coarse models. The results show a close match of unstructured coarse grid flow results with those of fine grid, and substantial accuracy compared to uniformly gridded coarse grid model.     

Optimized hybrid dielectrophoretic microchip for separation of bioparticles

Point-of-care diagnostics requires a smart separation of particles and/or cells. In this work, the multiorifice fluid fractionation as a passive method and dielectrophoresis-based actuator as an active tool are combined to offer a new device for size-based particle separation. The main objective of the combination of these two well-established techniques is to improve the performance of the multiorifice fluid fractionation by taking advantage of dielectrophoresis-based actuator for separating particles. Initially, by using numerical simulations, the effect of using dielectrophoresis-based actuator in multiorifice fluid fractionation on the separation of particles was investigated, and the size of the device was optimized by 25% compared to a device without dielectrophoresis-based actuator. Also, adding dielectrophoresis-based actuator to multiorifice fluid fractionation can extend the range of flow rates needed for separation. In the absence of dielectrophoresis-based actuator, the separation took place only when the flow rate is 100 μL/min, in the presence of dielectrophoresis-based actuator (20 Vp-p), the separation happened in flow rates ranging from 70 to 120 μL/min.     

A Novel Strategy for Simultaneous Determination of Dopamine and Uric Acid Using a Carbon Paste Electrode Modified with CdTe Quantum Dots

A novel CdTe quantum dots‐modified carbon paste electrode (QDMCPE) was fabricated and used to study the electrooxidation of dopamine and uric acid and their mixtures by electrochemical methods. Using square wave voltammetry (SWV), a highly sensitive and simultaneous determination of dopamine and uric acid was explored at the modified electrode. SWV peak currents of dopamine and uric acid increased linearly with their concentrations in the ranges of 7.5×10^?8–6.0×10^?4 M, and 7.5×10^?6–1.4×10^?3 M, respectively. Finally this new sensor was used for determination of dopamine and uric acid in some real samples.     

Structure and dielectric studies of nano-composite Fe2O3: BaTiO3 prepared by sol-gel method

Nano-structure pure barium titanate (BaTiO₃) and that was doped with iron oxide (Fe₂O₃), have been prepared by sol-gel method, using barium acetate (Ba(Ac)₂) and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The as-grown prepared samples by sol-gel technique were found to be amorphous, which crystallized to the tetragonal phase after synthesized at 750 °C in air for 1 h as detected from the XRD patterns. The XRD data were confirmed by transmission electron microscope (TEM). The dielectric properties namely; dielectric constant (ε′) and loss tangent (tan δ) in the frequency range between 42 Hz and 1 MHz, at range of temperature 25-250 °C were investigated. The temperature dependence of ε′ and tan δ for the undoped and doped materials, at 1 kHz, was also investigated. As a result, tan δ increased rapidly with decreasing temperature below 125 °C (Curie temperature) while above this temperature, tan δ shows temperature independent. As a result, below and above Curie temperature, ferroelectric phase and paraelectric phase of BaTiO₃ can be obtained, respectively.     

TiO2/Fe3O4/Multiwalled Carbon Nanotubes Nanocomposite as Sensing Platform for Simultaneous Determination of Morphine and Diclofenac at a Carbon Paste Electrode

Russian Journal of Electrochemistry - A nanocomposite of TiO2/Fe3O4/MWCNTs (TFMWCNT) and ionic liquid was used to fabrication of a novel modified carbon paste electrode. The modified electrode was...     

Natural analcime zeolite modified with 5-Br-PADAP for the preconcentration and anodic stripping voltammetric determination of trace amount of cadmium.

A procedure for separation and preconcentration of trace amounts of cadmium has been proposed. A column of analcime zeolite modified with benzyldimethyltetradecylammonium chloride and loaded with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) was used for retention of cadmium. The cadmium was quantitatively retained on the column at pH approximately 9 and was recovered from column with 5 ml of 2 M nitric acid with a preconcentration factor of 140. Anodic stripping differential pulse voltammetry was used for determination of cadmium. A 0.05 ng/ml detection limit for the preconcentration of aqueous solution of cadmium was obtained. The relative standard deviation (RSD) for eight replicate determinations at the 1 microg/ml cadmium levels was 0.31% (calculated with the peak height obtained). The calibration graph using the preconcentration system was linear from 0.01 to 150 microg/ml in final solution with a correlation coefficient of 0.9997. For optimization of conditions, various parameters such as the effect of pH, flow rate, instrumental conditions and interference of number of ions, were studied in detail. This method was successfully applied for determination of cadmium in various complex samples.     

Efficient spin filtering in a disordered semiconductor superlattice in the presence of Dresselhaus spin-orbit coupling

The influence of the Dresselhaus spin-orbit coupling on spin polarization by tunneling through a disordered semiconductor superlattice was investigated. The Dresselhaus spin-orbit coupling causes the spin polarization of the electron due to transmission possibilities difference between spin up and spin down electrons. The electron tunneling through a zinc-blende semiconductor superlattice with InAs and GaAs layers and two variable distance In_xGa_(1−x)As impurity layers was studied. One hundred percent spin polarization was obtained by optimizing the distance between two impurity layers and impurity percent in disordered layers in the presence of Dresselhaus spin-orbit coupling. In addition, the electron transmission probability through the mentioned superlattice is too much near to one and an efficient spin filtering was recommended.     

Influence of in-plane magnetic field on spin polarization in the presence of the oft-neglected k-Dresselhaus spin-orbit coupling

The influence of in-plane magnetic field on spin polarization in the presence of the oft-neglected k³-Dresselhaus spin-orbit coupling was investigated. The k³-Dresselhaus term can produce a limited spin polarization. The in-plane magnetic field plays a great role in the tunneling process. It can generate the perfect spin polarization of the electrons and the ideal transmission coefficient for spin up and down simultaneously. In energy scale, complete separation between spin up and down resonance was obtained by a relatively higher in-plane magnetic field while a comparatively lower in-plane magnetic field vanishes the spin separation. On the other hand, the spin relaxation can be suppressed by compensating the oft-neglected k³-Dresselhaus spin orbit coupling using a relatively lower in-plane magnetic field.