Sulphide based anode material for lithium rechargeable battery

In this study, lead sulphide (PbS) was prepared by the chemical bath deposition technique. The sample was characterized by X-ray diffraction (XRD), Energy Dispersive Analysis of X-rays (EDAX) and cyclic voltammetry. EDAX spectrum shows peaks attributable to lead and sulphur. The EDAX analysis also shows that the prepared sample is stoichiometric. Cyclic voltammetry experiments were recorded at 100 mV·s⁻¹ and 400 mV·s⁻¹ scan rates. Results show that the rate controlling electrochemical reaction is electron transfer. The presence of redox waves shows that the lithium intercalation and deintercalation can occur as a result of lattice expansion in PbS. There were no differences in the PbS XRD data before and after the cyclic voltammetry experiments indicating that the PbS structure is not modified upon lithium ion intercalation and deintercalation in PbS. The discharge characteristics for 35 cycles of the cell using the LiCoO₂/PbS couple is presented indicating the possible development of such materials as anode in lithium ion cells.     

Organophosphorus chemistry,XII. Reaction of furil with alkyl phosphites and ylide-phosphoranes

Summary The reaction of furil (1) with trialkyl phosphites2 yielded caged phosphorane derivatives of types3a-c. Dry hydrogen chloride gas converted3a-c into the respectivea-hydroxyvinyl-phosphates8a-c which are equally produced by reacting furil with the appropriate dialkyl phosphite7. The reaction of furil with ylide-phosphoranes10 proceeded according to the Wittig reaction mechanism to give the respective ethylenes11a-c. The new compounds have been characterized by their spectroscopic data (IR, PMR,³¹P-NMR, MS) and elementary analyses.Dedicated to Prof. M. Sidky on the occasion of his 60th birthday     

Preparation of cellulose and cellulose derivative azo compounds

Wood pulp and cotton linter are the most common sources of cellulose forindustrial use. Methyl cellulose (MC) and cellulose sulfate (CS) were preparedusing bleached wood pulp and cotton linter. Coloured azo compounds were alsoprepared from coupling cellulose, wood pulp, MC and CS with aromatic diazoniumsalt. The presence of electron-releasing or withdrawing substituents affectedthe electrophilic substitution reaction. The produced azo compounds werecharacterized by FT-IR methodology, as well as mass spectrometry, in which thefunctional groups and the ion fragments of the products were analyzed.     

Polarographic behaviour and determination of paracetamol and salicylamide after treatment with nitrous acid

A polarographic procedure is described for the determination of paracetamol (acetaminophen) and salicylamide after treatment with nitrous acid. The different experimental parameters affecting the derivatization process and the polarographic analysis were studied. The derivatization products were found to be reduced at the dropping mercury electrode over the whole pH range in Britton-Robinson buffers. At pH 7.0, well defined diffusion-controlled cathodic waves were produced for both compounds. Plots of limiting current vs. concentration were linear over the ranges 0.05–0.75 and 0.25–1.5mM for paracetamol and salicylamide, respectively, in the d.c. mode, with minimum detectability of 2.5 × 10^–6 and 1.25 × 10^–5 M, respectively. The procedure was applied to the analysis of some pharmaceutical dosage forms and the results were in good agreement with those obtained by official and compendial methods.     

Brightly phosphorescent trinuclear copper(I) complexes of pyrazolates: substituent effects on the supramolecular structure and photophysics

Synthetic details, solid-state structures, and photophysical properties of a group of trimeric copper(I) complexes containing pyrazolate ligands are described. The reaction of copper(I) oxide and the fluorinated pyrazoles [3-(CF(3))Pz]H, [3-(CF(3)),5-(Me)Pz]H, and [3-(CF(3)),5-(Ph)Pz]H leads to the corresponding trinuclear copper(I) pyrazolates, {[3-(CF(3))Pz]Cu}(3), {[3-(CF(3)),5-(Me)Pz]Cu}(3), and {[3-(CF(3)),5-(Ph)Pz]Cu}(3), respectively, in high yield. The {[3,5-(i-Pr)(2)Pz]Cu}(3) compound was obtained by a reaction between [Cu(CH(3)CN)(4)][BF(4)], [3,5-(i-Pr)(2)Pz]H, and NEt(3). These compounds as well as {[3,5-(Me)(2)Pz]Cu}(3) and {[3,5-(CF(3))(2)Pz]Cu}(3) adopt trimeric structures with nine-membered Cu(3)N(6) metallacycles. There are varying degrees and types of intertrimer Cu...Cu interactions. These contacts give rise to zigzag chains in the fluorinated complexes, {[3-(CF(3))Pz]Cu}(3), {[3-(CF(3)),5-(Me)Pz]Cu}(3), {[3-(CF(3)),5-(Ph)Pz]Cu}(3), and {[3,5-(CF(3))(2)Pz]Cu}(3), whereas the nonfluorinated complexes, {[3,5-(Me)(2)Pz]Cu}(3) and {[3,5-(i-Pr)(2)Pz]Cu}(3) form dimers of trimers. Out of all the compounds examined in this study, {[3-(CF(3)),5-(Ph)Pz]Cu}(3) has the longest (3.848 Angstroms) and {[3,5-(Me)(2)Pz]Cu}(3) has the shortest (2.946 Angstroms) next-neighbor intertrimer Cu...Cu distance. The Cu...Cu separations within the trimer units do not vary significantly (typically 3.20-3.26 Angstroms). All of these trinuclear copper(I) pyrazolates show bright luminescence upon exposure to UV radiation. The luminescence bands are hugely red-shifted from the corresponding lowest-energy excitations, rather broad, and unstructured even at low temperatures, suggesting metal-centered emissions owing to intertrimer Cu...Cu interactions that are strengthened in the phosphorescent state. The {[3-(CF(3)),5-(Ph)Pz]Cu}(3) compound exhibits an additional highly structured phosphorescence with a vibronic structure corresponding to the pyrazolyl (Pz) ring. The luminescence properties of solids and solutions of the trimeric compounds in this study show fascinating trends with dramatic sensitivities to temperature, solvent, concentration, and excitation wavelengths.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

Computational complexity of LCPs associated with positive definite symmetric matrices

Murty in a recent paper has shown that the computational effort required to solve a linear complementarity problem (LCP), by either of the two well known complementary pivot methods is not bounded above by a polynomial in the size of the problem. In that paper, by constructing a class of LCPs—one of ordern forn 2—he has shown that to solve the problem of ordern, either of the two methods goes through 2 ⁿ pivot steps before termination.However that paper leaves it as an open question to show whether or not the same property holds if the matrix,M, in the LCP is positive definite and symmetric. The class of LCPs in whichM is positive definite and symmetric is of particular interest because of the special structure of the problems, and also because they appear in many practical applications.In this paper, we study the computational growth of each of the two methods to solve the LCP, (q, M), whenM is positive definite and symmetric and obtain similar results.This research is partially supported by Air Force Office of Scientific Research, Air Force Number AFOSR-78-3646. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation thereon.     

Performance investigation of an advanced tracked prime mover on the low bearing soil

This study has presented a performance investigation of an advanced tracked prime mover for the operation of agricultural goods and other operations on peat terrain. The maximum and continuous traction torque of the prime mover has been developed by designing an advanced controller for controlling the intelligent system. The prime mover’s mobility is studied with ultrasonic displacement sensor, torque transducer, National Instrument cRIO-9004 Compact-RIO Real-time Controller Unit (RCU), a National Instrument TPC 2106T Touch Panel Control (TPC), a Trimble AG132 GPS antenna and receiver unit, and a Dlink DIR-655 router. The fuzzy logic controller (FLC) has been equipped with the prime mover hydraulic system to increase the traction torque of the hydraulic motor when the prime mover’s sinkage is more than or equal to 70 mm. The prime mover’s design demonstrates good potential in traversing peat terrain as the measured tractive effort was found to be 48% of the vehicle’s gross weight while the recommended tractive effort is in the range of 30–36% of the vehicle’s gross weight.     

Chromium Trioxide Supported onto Wet Silica Gel: Rapid Oxidation of Alcohols to Carbonyl Compounds Under Microwave Irradiation in Solventless System

In an environmentally benign system, alcohols are rapidly oxidized to carbonyl compounds using CrO 3 supported onto wet silica gel as an oxidant under microwave irradiation.