Modélisation du champ des vitesses de l'urine dans un bolus urétéralModelling of urine flow in an ureteral bolus

Urine transport is made from the kidney to the bladder through the ureter by isolated pockets called bolus. To determine the urine flow in a bolus, we use an adherence condition on the interface urine/wall. It gives us an infinite linear system verified by a set of parameters. An iterative and convergent algorithm allows us to solve this system and to determine analytically the components of the velocity vector in the bolus. To cite this article: A. Vogel et al., C. R. Mecanique 332 (2004).     

Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

High-Resolution Spectrum and Rovibrational Analysis of the nu(2)/nu(5) Dyad of D(3)SiF near 700 cm(-1)

The nu(2) (A(1), 710.157 cm(-1)) and nu(5) (E, 701.717 cm(-1)) fundamental bands of D(3)(28)SiF have been studied by FTIR spectroscopy with a resolution of 2.4 x 10(-3) cm(-1). We assigned 1648 lines for the parallel band (J(max) = 50, K(max) = 21), 4279 for the perpendicular band (J(max) = 52, K(max) = 27), and in addition 671 perturbation-allowed transitions (J(max) = 50, K(max) = 12). The nearly degenerate v(2) = 1 and v(5) = 1 states are linked by (DeltaK = +/-1, Deltal = +/-1) and (DeltaK = +/-2, Deltal = -/+1) interactions, while the l(5) = +/-1 levels of nu(5) interact also by l(2, -1), l(2, 2), and l(2, -4) interactions. The first model with 36 free parameters, taking into account all these resonances through a nonlinear least-squares program, gave standard deviations of 1.56 x 10(-4) cm(-1) for 5997 nonzero-weighted IR data and 138 kHz for 8 MW data from the literature. The second model, in which the main Coriolis term was constrained to a force field value, used 37 parameters and gave similar standard deviations. A new determination of the A(0) and D(0)(K) ground state parameters was performed by two methods: either using differences between "forbidden" transitions differing by 3 in K or letting A(0) and D(0)(K) free in the global fit. The values obtained are fully compatible with those obtained previously by the "loop method." Copyright 2000 Academic Press.     

Adaptive Diagnosis for Fault Tolerant Data Fusion Based on α-Rényi Divergence Strategy for Vehicle Localization

When applying a diagnostic technique to complex systems, whose dynamics, constraints, and environment evolve over time, being able to re-evaluate the residuals that are capable of detecting defaults and proposing the most appropriate ones can quickly prove to make sense. For this purpose, the concept of adaptive diagnosis is introduced. In this work, the contributions of information theory are investigated in order to propose a Fault-Tolerant multi-sensor data fusion framework. This work is part of studies proposing an architecture combining a stochastic filter for state estimation with a diagnostic layer with the aim of proposing a safe and accurate state estimation from potentially inconsistent or erroneous sensors measurements. From the design of the residuals, using α-Rényi Divergence (α-RD), to the optimization of the decision threshold, through the establishment of a function that is dedicated to the choice of α at each moment, we detail each step of the proposed automated decision-support framework. We also dwell on: (1) the consequences of the degree of freedom provided by this α parameter and on (2) the application-dictated policy to design the α tuning function playing on the overall performance of the system (detection rate, false alarms, and missed detection rates). Finally, we present a real application case on which this framework has been tested. The problem of multi-sensor localization, integrating sensors whose operating range is variable according to the environment crossed, is a case study to illustrate the contributions of such an approach and show the performance.     

Cleavage of the C---Se bond of cyclic selenoacetals derived from 4-t-butyl cyclohexanone with butyllithiums and tin and silyl hydrides

Selenoacetals derived from 1,3-propanediselenol and 1,2-ethanediselenol are much less prone to be cleaved by butyllithiums than their open chain analogues. The stereochemistry of the products resulting from these reactions as well as from the cleavage of the C---Se bond under radical conditions is disclosed.     

Weighted least squares,polyad analyses,and theoretical consistency: A demonstrative example: The 12CH3F molecule

A comprehensive approach of the simultaneous analysis of several complex vibrational polyads in polyatomic molecules is presented. Specific points regarding theoretical models and weighted least-squares procedures are discussed with the aim of determining a unique set of parameter values for reproducing all available data on a given molecule. The simultaneous analysis of the dyad $\text{ν}{}_2\text{ν}{}_5$ and the pentad $\text{ν}{}_1\text{/ν}{}_4\text{/2ν}{}_2\text{/ν}{}_2\text{+}\text{ν}{}_5\text{2ν}{}_5$ of ¹²CH₃F using microwave and infrared data is reported as an illustration.     

Synthesis of selenolates from stannyl and silyl alkylselenides

Stannyl and silyl alkylselenides have been efficiently transformed to the corresponding alkylselenolates on reaction with butyllithiums. Other conditions proved to be limited.     

A damage identification technique for beam-like and truss structures based on FRF and Bat Algorithm

In this paper, a Structural Health Monitoring (SHM) technique for damage identification in beam-like and truss structures using Frequency Response Function (FRF) data coupled with optimization techniques is presented. Genetic Algorithm (GA) and Bat Algorithm (BA) are used to estimate the location and severity of damage. The damage in the structures is simulated by reduction in rigidity of specific members. Both optimization techniques are coupled with modelled structures using Finite Element Method (FEM). The approach is based on minimizing an objective function by comparing measured and calculated FRFs. The results show that better accuracy is obtained using BA than using GA in terms of precision and computational time. Furthermore, it is found that the proposed approach provides faster solution than other approaches in the literature.     

Ag‐doped TiO2 enhanced photocatalytic oxidation of 1,2‐cyclohexanediol

The superiority of silver‐doped titania for photocatalytic oxidation (PCO) of organic compounds inspired us to investigate PCO of 1,2‐cyclohexanediol. Ag/TiO₂ was prepared, characterized (nanosize 19–24 nm) and used for oxidation of 1,2‐cyclohexanediol (1) in acetonitrile. The photolysate was analyzed using GC and GC/MS techniques. The PCO products are 2‐hydroxylcyclohexanone (2), 1,2‐cyclohexandione (3), 2‐cyclohexenone(4), cyclohexanone (5), and adipic acid (6).The formation of electron–hole pair at the surface of the catalyst followed by oxidation reactions was the suggested mechanism. Kinetic studies revealed first‐order mechanism for PCO of 1 and rate constant (k) = ?0.145 h^–1. Copyright © 2012 John Wiley & Sons, Ltd.     

Path and path deviation equations for <Emphasis Type="Italic">p</Emphasis>-branes

Path and path deviation equations for neutral, charged, spinning and spinning charged test particles, using a modified Bazanski Lagrangian, are derived. We extend this approach to strings and branes. We show how the Bazanski Lagrangian for charged point particles and charged branes arises à la Kaluza-Klein from the Bazanski Lagrangian in 5-dimensions.