Determination of very low levels of inorganic and organic mercury in natural waters by cold-vapor atomic absorption spectrometry after preconcentration on a chelating resin

Inorganic and organic mercury at ng l^?1 levels in fresh waters are collected simultaneously on a column of a dithiocarbamate-treated resin and quantitatively eluted with slightly acidic aqueous thiourea solution. Mercury vapor is generated from inorganic mercury by reduction with alkaline SnCl₂ solution, and from inorganic and organic mercury with a CdCl₂SnCl₂ solution, for determination by cold-vapor atomic absorption spectrometry. The range of determination is 0.2–5,000 ppt (ng l^?1) for 20-l water samples.     

Characterization and crystal structures of copper(II), cobalt(II), and nickel(II) complexes with two kinds of piperidine carboxylic acids

Copper(II) complex with -piperidine-3-carboxylic acid ( -Hpipe-3):[Cu( -pipe-3)₂(H₂O)] and cobalt(II) and nickel(II) complexes with piperidine-4-carboxylic acid (Hpipe-4):[M(Hpipe-4)₂(H₂O)₄]Cl₂ (M: Co, Ni) have been prepared and characterized by means of IR and powder diffuse reflection spectra, thermal analysis, and magnetic susceptibility. The crystal structures of these complexes have been determined by X-ray diffraction. The crystal of [Cu( -pipe-3)₂(H₂O)] is orthorhombic with the space group Pbcn. The copper atom is in a square pyramidal geometry, ligated by two carboxylato oxygen atoms, two nitrogen atoms, and a water molecule. One molecule of this complex consists of either -piperidine-3-carboxylic acid or -piperidine-3-carboxylic acid. The crystals of [M(Hpipe-4)₂(H₂O)₄]Cl₂ are monoclinic with space group P2₁/n. In these complexes the metal atom is in an octahedral geometry ligated by two carboxylato oxygen atoms and four water molecules.     

Micro-determination of total phthalate esters in biological samples by gas-liquid chromatography.

A method was investigated in which all of the phthalate esters in biological samples were determined as phthalic acid by gas-liquid chromatography. The method is based on the separation of phthalate esters from the sample with n-hexane, saponification of the esters with an alkaline ethanolic solution to give phthalic acid, purification of the acid by extraction with diethyl ether and column chromatography using silica gel, and conversion of the acid into bis(2,2,2-trifluoroethyl) phthalate with a 2,2,2-trifluoroethanol solution containing boron trifluoride. The derivative obtained is highly sensitive to an electron-capture detector, giving a sensitivity of 0.1 pg. Biological samples fortified with di(2-ethylhexyl) phthalate at levels of 5-100 ppb were analyzed, with recoveries of 70-100%.     

NMR and DFT studies on persistent carbocations derived from benzo[kl]xanthene,dibenzo[d,d′]benzo[1,2‐b:4,3‐b′]difuran,and dibenzo[d,d′]benzo[1,2‐b:4,5‐b′]difuran in superacidic media

Persistent carbocations generated by the protonation of hetero‐polycyclic aromatic compounds with oxygen atom(s) were studied by experimental NMR and density function theory calculations. Benzo[kl]xanthene ( 1 ), dibenzo[d,d′]benzo[1,2‐b:4,3‐b′]difuran ( 2 ), and dibenzo[d,d′]benzo[1,2‐b:4,5‐b′]difuran ( 3 ) were synthesized by the annulation of arenediazonium salts. Compound 1 in FSO₃H‐SbF₅ (4:1)/SO₂ClF and 3 in FSO₃H‐SbF₅ (1:1)/SO₂ClF ionized to 1aH⁺ with protonation at C(4) and to 3aH⁺ with protonation at C(6), and these cations were successfully observed by NMR at low temperatures. The density function theory calculations indicated that 1aH⁺ and 3aH⁺ were the most stable protonated carbocations and that 2 should ionize to 2aH⁺ with protonation at C(6). According to the changes in ¹³C chemical shifts (Δδ¹³C), the positive charge was delocalized into the naphthalene unit for 1aH⁺ , into one benzo[b,d]furan unit for 2aH⁺ , and into one benzo[b,d]furan unit for 3aH⁺ . Copyright © 2015 John Wiley & Sons, Ltd.     

Phase structure change and ER effect in liquid crystalline polymer/dimethylsiloxane blends

The mechanism of the electrorheological (ER) effect in two types of liquid crystalline polymer (LCP)/dimethylsiloxane (DMS) blends was investigated by rheological measurements and by structure observation under electric field and shear flow. The results show that the phase structures of these immiscible blends can be categorized into slipping (low viscosity) and non-slipping (high viscosity) states. In the non-slipping state, higher viscosity LCP domains connect the electrodes. In the slipping state, on the other hand, LCP domains do not connect the electrodes and the shear is mainly confined in the lower viscosity DMS domains. The ER effect (electrically induced viscosity increase) originates from the electrically induced slipping to non-slipping transition. In one of the blends, the ER effect occurs only at high shear rate, since this blend is in non-slipping state even under no field if the shear rate is low. Received: 29 April 1997 Accepted: 3 November 1997     

Molecular defects of polyacrylonitrile formed in aqueous medium

The various kinds of molecular defect that are related to the thermal property of polyacrylonitrile (PAN) are studied in detail in relation to the polymerization mechanism in an aqueous medium. The existence of two different kinds of polymer radical is pointed out and the significance of polarity of radical species is emphasized. It is shown that the structural irregularity along the main chain is surely present but has little effect on the thermal property of PAN. It is estimated that one of the most significant defects relating to the thermal property is the main-chian type of branching the occurs predominantly in hydrogen on a polymer backbone. The relationship between activator (i.e., NaHSO₃) incorporation and branch inhibition mechanisms is discussed. The optimum polymerization condition, under which the highest thermal quality of molecules is obtained, is found empirically within a limited experimental range, for an aqueous heterogeneous system.     

Development of a 6-hydroxychroman-based derivatization reagent: application to the analysis of 5-hydroxytryptamine and catecholamines by using high-performance liquid chromatography with electrochemical detection

We developed a novel derivatization reagent, (2R)-2,5-dioxopyrrolidin-1-yl-2,5,7,8-tetramethyl-6-(tetrahydro-2H-pyran-2-yloxy)chroman-2-carboxylate (NPCA), for electrochemical (EC) detection in HPLC. NPCA was synthesized from (R)-(+)-6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (alpha-CA), which exhibits intense EC response. NPCA successfully yielded alpha-CA derivatives of primary amines by a two-step derivatization procedure. Following pre-column derivatization with NPCA, a simultaneous determination of alpha-CA derivatives of neuroactive monoamines [dopamine (DA), epinephrine, and 5-hydroxytryptamine (5-HT)], their monoamine oxidase metabolites (3,4-dihydroxyphenylacetic acid, homovanillic acid, and 5-hydroxyindole-3-acetic acid) and their catechol-O-methyltransferase metabolites [3-methoxytyramine (3-MT) and normetanephrine (NMN)] was completely achieved using our HPLC-EC method. Using an HPLC equipped with coulometric electrode-array detection system, the resultant alpha-CA derivatives of NMN, 5-HT, DA and 3-MT showed intense EC responses, that were approximately 1.3, 1.4, 1.1 and 1.4-fold higher than the corresponding native forms, respectively. The detection limits were in the range of approximately 16-60 fmol on column (signal-to-noise ratio 3). The proposed HPLC method was applied to determine 5-HIAA, HVA, alpha-CA-5-HT and alpha-CA-DA in rat urine. As a consequence, these analytes were successfully determined with satisfactory precisions.     

Rapid development of hydrophilicity and protein adsorption resistance by polymer surfaces bearing phosphorylcholine and naphthalene groups

In order to provide a protein adsorption resistant surface even when the surface was in contact with a protein solution under completely dry conditions, a new phospholipid copolymer, poly (2-methacryloyloxyethyl phosphorylcholine (MPC)- co-2-vinylnaphthalene (vN)) (PMvN), was synthesized. Poly(ethylene terephthalate) (PET) could be readily coated with PMvN by a solvent evaporation method. Dynamic contact angle measurements with water revealed that the surface was wetted very rapidly and had strong hydrophilic characteristics; moreover, molecular mobility at the surface was extremely low. When the surface came in contact with a plasma protein solution containing bovine serum albumin (BSA), the amounts of the plasma protein adsorbed on the dry surface coated with PMvN and that adsorbed on a dry surface coated with poly(MPC-co-n-butyl methacrylate) (PMB) were compared. Substantially lower protein adsorption was observed with PMvN coating. This is due to the rapid hydration behavior of PMvN. We concluded that PMvN can be used as a functional coating material for medical devices without any wetting pretreatment.     

Microfluidic flow control on charged phospholipid polymer interface

A type of charged phospholipid polymer biointerface was constructed on a quartz microfluidic chip to control the electroosmotic flow (EOF) and to suppress non-specific protein adsorption through one-step modification. A negatively charged phospholipid copolymer containing 2-methacryloyloxyethyl phosphorylcholine (MPC), n-butyl methacrylate (BMA), potassium 3-methacryloyloxypropyl sulfonate (PMPS) and 3-methacryloxypropyl trimethoxysilane (MPTMSi) moieties (referred to as PMBSSi) was synthesized to introduce such phosphorylcholine segments as well as surface charges onto the silica-based microchannels via chemical bonding. At neutral pH, the homogenous microchannel surface modified with 0.3 wt% PMBSSi in alcoholic solution, retained a significant cathodic EOF ((1.0 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)) with approximately one-half of the EOF of the unmodified microchannel ((1.9 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)). Along with another non-charged copolymer (poly(MPC-co-MPTMSi), PMSi), the regulation of the surface charge density can be realized by adjusting the concentration of PMBSSi or PMSi initial solutions for modification. Coincidently, the zeta-potential and the EOF mobility at neutral pH showed a monotonically descending trend with the decrease in the charge densities on the surfaces. This provides a simple but feasible approach to controlling the EOF, especially with regard to satisfying the requisites of miniaturized systems for biological applications requiring neutral buffer conditions. In addition, the EOF in microchannels modified with PMBSSi and PMSi could maintain stability for a long time at neutral pH. In contrast to the EOF in the unmodified microchannel, the EOF in the modified microchannel was only slightly affected by the change in pH (from 1 to 10). Most importantly, although PMBSSi possesses negative charges, the non-specific adsorptions of both anionic and cationic proteins (considering albumin and cytochrome c, respectively, as examples) were effectively suppressed to a level of 0.15 microg cm(-2) and lesser in the case of the 0.3 wt% PMBSSi modification. Consequently, the variation in the EOF mobility resulting from the protein adsorption was also suppressed simultaneously. To facilitate easy EOF control with compatibility to biomolecules delivered in the microfluidic devices, the charged interface described could provide a promising option.