Cems characterization of SnO2 films obtained by sputtering and sol-gel route

Conversion electron Mössbauer spectroscopy (CEMS) has been used to study tin oxide films prepared by sol-gel dipping and sputtering. The spectra of films prepared by sol-gel route result close to that of crystalline SnO₂ after heat treatment at a temperature as low as 150°C. The Mössbauer parameters of as sputter deposited films indicate that the structure of the deposited stannic oxide has an amorphous character more pronounced for thinner samples. The structure becomes predominantly that of crystalline SnO₂ by heating at 550°C for 30 min provided the film thickness is higher than 10 nm.     

Terpyridine Zn(II), Ru(III), and Ir(III) complexes: the relevant role of the nature of the metal ion and of the ancillary ligands on the second-order nonlinear response of terpyridines carrying electron donor or electron acceptor groups

Coordination of 4'-(C6H4-p-X)-2,2':6',2'-terpyridines [X = NO2, NBu2, (E)-CH=CH-C6H4-p-NBu2, (E,E)-(CH=CH)2-C6H4-p-NMe2] to Zn(II), Ru(III), and Ir(III) metal centers induces a significant enhancement of the absolute value of the second-order nonlinear optical (NLO) response of the terpyridine, measured by means of both electric field induced second harmonic generation and solvatochromic methods. By varying the nature of the metal center, the enhanced second-order NLO response shifts from positive to negative. Such a shift is controlled by electronic charge-transfer transitions, such as metal-to-ligand or ligand-to-metal transitions, in addition to the intraligand charge transfer. The enhancement generated by coordination is also controlled by the chelation effect and by fine-tuning of the ancillary ligands.     

Toward efficient Zn(II)-based artificial nucleases

A series of cis-cis-triaminocyclohexane Zn(II) complex-anthraquinone intercalator conjugates, designed in such a way to allow their easy synthesis and modification, have been investigated as hydrolytic cleaving agents for plasmid DNA. The ligand structure comprises a triaminocyclohexane platform linked by means of alkyl spacers of different length (from C(4) to C(8)) to the anthraquinone group which may intercalate the DNA. At a concentration of 5 microM, the complex of the derivative with a C(8) alkyl spacer induces the hydrolytic stand scission of supercoiled DNA with a rate of 4.6 x 10(-6) s(-1) at pH 7 and 37 degrees C. The conjugation of the metal complex with the anthraquinone group leads to a 15-fold increase of the cleavage efficiency when compared with the anthraquinone lacking Zn-triaminocyclohexane complex. The straightforward synthetic procedure employed, allowing a systematic change of the spacer length, made possible to gain more insight on the role of the intercalating group in determining the reactivity of the systems. Comparison of the reactivity of the different complexes shows a remarkable increase of the DNA cleaving efficiency with the length of the spacer. In the case of too-short spacers, the advantages due to the increased DNA affinity are canceled due to the incorrect positioning of the reactive group, thus leading to cleavage inhibition.     

New pyrrole-based amino acids for the synthesis of peptidomimetic constrained scaffolds

A new family of pyrrole-based amino acids have been prepared through the microwave assisted Paal-Knorr reaction of 1-4 ketoesters derived from the corresponding β-ketoester with a functional homologation. The carboxylic group is located in position 3 of the pyrrole, whereas the amino group, protected with the Cbz moiety, is present on the side chain in positions 1 or 2. These compounds were used to prepare constrained oligopeptides.     

Study of ruthenium(II) complexes with anticancer drugs as ligands. Design of metal-based phototherapeutic agents

The reaction of trans-[RuCl(2)(PPh(3))(3)] (Ph = C(6)H(5)) with 2-thio-1,3-pyrimidine (HTPYM) and 6-thiopurines (TPs) produced mainly crystalline solids that consist of cis,cis,trans-[Ru(PPh(3))(2)(N,S-TPYM)(2)] (1) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-TPs)(2)]X(2) (X = Cl(-), CF(3)SO(3)(-)). In the case of TPs, other coordination isomers have never been isolated and reported. Instead, the mother liquor obtained after filtration of 1 produced red single crystals of trans,cis,cis-[Ru(PPh(3))(2)(N,S-TPYM)(2)].2H(3)O(+).2Cl(-) (2.2H(3)O(+).2Cl(-)). Selected ruthenium(II)-thiobase complexes were studied for their structural, reactivity, spectroscopic, redox, and cytotoxic properties. Single crystals of 1 contain thiopyrimidinato anions chelated to the metal center via N and S. The Ru[bond]N bonds are significantly elongated for 1 [2.122(2) and 2.167(2) A] with respect to 2 [2.063(3) A] because of the trans influence from PPh(3). The coordination pseudo-octahedron for 2 is significantly elongated at the apical sites (PPh(3) ligands). Solutions of cis,cis,trans isomers in air are stable for weeks, whereas those of 2 turn green within 24 h, in agreement with the respective redox potentials. cis,cis,trans- and trans,cis,cis-[Ru(PH(3))(2)(N,S-TPYM)(2)], as optimized through the DFT methods at the Becke3LYP level are in good agreement with experimental geometrical parameters (1 and 2), with cis,cis,trans being more stable than trans,cis,cis by 3.88 kcal. The trend is confirmed by molecular modeling based on semiempirical (ZINDO/1) and molecular mechanics (MM) methods. Cytotoxic activity measurements for cis,cis,trans-[Ru(PPh(3))(N-THZ)(N(7),S -H(2)TP)(2)]Cl(2) (4) (THZ = thiazole, H(2)TP = 6-thiopurine) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-HTPR)2]Cl(2) (5) (HTPR = 6-thiopurine riboside) against ovarian cancer cells A2780/S gave IC(50) values of 17 +/- 1 and 29 +/- 9 microM, respectively. Furthermore, the spectral analysis of HTPYM, TPs, and their Ru(II) complexes in solution shows that intense absorptions occur in the UVA/vis region of light, whereas standard nucleobases absorb in the UVB region.     

Low oxidation state ruthenium chemistry : IV. The reactions of M(CO)2(PPh3)3 complexes (M = Fe,Ru) and the hydrogenation and isomerization of alkenes catalyzed by RuL(CO)2(PPh3)2 (L = H2, PPh3)

The complexes M(CO)₂(PPh₃)₃ (I, M = Fe; II, M = Ru) readily react with H₂ at room temperature and atmospheric pressure to give cis-M(H)₂(CO)₂(PPh₃)₂ (III, M = Fe;IV,M = Ru). I reacts with O₂ to give an unstable compound in solution, in a type of reaction known to occur with II which leads to cis-Ru(O₂)(CO)₂(PPh₃)₂(V). Even compound IV reacts with O₂ to give V with displacement of H₂; this reaction has been shown to be reversible and this is the first case where the displacement of H₂ by O₂ and that of O₂ by H₂ at a metal center has been observed. III and IV are reduced to M(CO)₃(PPh₃)₂ by CO with displacement of H₂; Ru(CO)₃- (PPh₃)₂ is also formed by treatment of IV with CO₂, but under higher pressure. Compounds II and IV react with CH₂CHCN to give Ru(CH₂CHCN)(CO)₂- (PPh₃)₂(VI) which reacts with H₂ to reform the hydride IV.cis-Ru(H)₂(CO)₂(PPh₃)₂(IV) has been studied as catalyst in the hydrogenation and isomerization of a series of monoenes and dienes. The catalysts are poisoned by the presence of free triphenylphosphine. On the other hand the ready exchange of H₂ and O₂ on the “Ru(CO)₂(PPh₃)₂” moiety makes IV a catalyst not irreversibly poisoned by the presence of air. It has been found that even Ru(CO)₂(PPh₃)₃(II) acts as a catalyst for the isomerization of hex-1-ene at room temperature under an inert atmosphere.     

A complete family of isostructural cluster compounds with cubane-like M(3)S(4)M' cores (M = Mo,W; M' = Ni,Pd, Pt): comparative crystallography and electrochemistry

By reaction of the geometrically incomplete cubane-like clusters [(eta(5)-Cp')(3)Mo(3)S(4))][pts] and [(eta(5)-Cp')(3)W(3)S(4)][pts] (Cp' = methylcyclopentadienyl; pts = p-toluenesulfonate) with group 10 alkene complexes, three new heterobimetallic clusters with cubane-like cluster cores were isolated: [(eta(5)-Cp')(3)W(3)S(4)M'(PPh(3))][pts] ([5][pts], M' = Pd; [6][pts], M' = Pt); [(eta(5)-Cp')(3)Mo(3)S(4)Ni(AsPh(3))][pts] ([7][pts]). The compounds [5][pts]-[7][pts] are completing the extensive series of clusters [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] (M = Mo, W; M' = Ni, Pd, Pt; E = P, As) which allows the consequences of replacing a single type of atom on structural and NMR and UV/vis spectroscopic as well as electrochemical properties to be determined. Single-crystal X-ray structure determinations of [5][pts]-[7][pts] revealed that [5][pts] was not isomorphous to the other members of the series [(eta(5)-Cp')(3)M(3)S(4)M'(EPh(3))][pts] due to distinctly different cell parameters, which in the molecular structure of [5](+) is reflected in a slightly different orientation of the PPh(3) ligand. Electrochemical measurements on the series showed that the Mo-based clusters were more difficult to oxidize than their W-based analogues. The Pd-containing clusters underwent two-electron oxidation processes, whereas the Ni- and Pt-containing clusters underwent two separated one-electron oxidation processes.     

Heat and moisture transfer in sol–gel treated cotton fabrics

Cotton fabrics have been treated by sol–gel processes in order to produce an inorganic coating on fibres, able to modify their thermal conductivity under an irradiating flow. To this aim, fabric specimens with different silica content have been tested following the ISO 6942 standard in order to establish the effect of the coating on coupled heat and moisture transfer through the cotton fibres. The collected results have been compared with those obtained by an optimized method using a cone calorimeter as the heating source. By this latter approach, it has been demonstrated that sol–gel cotton treated fabrics with high moisture uptake possess a significantly lower thermal conductivity with respect to cotton alone.     

Flame retardant high density polyethylene optimized by on-line ultrasound extrusion

The effect of on-line ultrasound application by a special static mixer die which promotes extensional flow simultaneously during the single screw extrusion process was thoroughly studied. The proportion of aluminum trihydroxide (ATH) used as flame retardant on high density polyethylene (HDPE) was optimized. The morphological, thermal, flammability, combustion, mechanical and rheological properties of the materials were investigated. The morphological study pointed out that this process is able to strongly reduce the size of ATH particles and improve their dispersion and distribution within the polymer matrix. The addition of zinc borate (ZB) at low concentration (namely 3 phr) showed its well-known synergistic effect in the thermal, oxygen index and fire combustion behavior. According to the UL94 standard, the rating for all materials tested changed from HB to V2, with respect to materials prepared without ultrasound; furthermore a rating V0 was achieved only with the addition of 2 phr organo-clay. Rheological results under simple and small amplitude oscillatory shear flow confirmed the enhanced particle dispersion and finer particle morphology evidenced by larger values of the moduli and by deviations from the semicircular shape observed in the Cole–Cole diagram. Mechanical properties such as Izod impact resistance, tensile strength, strain at break and tenacity were also improved by the on-line ultrasound process. In this work, the appropriate on-line ultrasound extrusion conditions to use the lowest ATH content (30 phr or 21.5 in wt%) were found, rendering HDPE optimized flame retardant materials with improved processability and mechanical properties.