A power mode approach to estimating vibrational power transmitted by multiple sources

A power mode method for the estimation of the power transmitted to a flexible receiver by an array of point force excitations is described. The vibrational power transmitted by N discrete point forces is regarded as the power transmitted by N independent power modes following eigendecomposition of the mobility matrix of the receiving structure. Approximate expressions for the upper and lower bounds and the mean value of the transmitted power are then developed in terms of these power modes. The approach is extended to more general cases, including that where both force and moment excitations are applied to the structure and where there are velocity source excitations. Numerical examples are presented.     

Potential benefits of a non-linear stiffness in an energy harvesting device

The benefits of using a non-linear stiffness in an energy harvesting device comprising a mass–spring–damper system are investigated. Analysis based on the principle of conservation of energy reveals a fundamental limit of the effectiveness of any non-linear device over a tuned linear device for such an application. Two types of non-linear stiffness are considered. The first system has a non-linear bi-stable snap-through mechanism. This mechanism has the effect of steepening the displacement response of the mass as a function of time, resulting in a higher velocity for a given input excitation. Numerical results show that more power is harvested by the mechanism if the excitation frequency is much less than the natural frequency. The other non-linear system studied has a hardening spring, which has the effect of shifting the resonance frequency. Numerical and analytical studies show that the device with a hardening spring has a larger bandwidth over which the power can be harvested due to the shift in the resonance frequency.     

Denaturation of proteins by SDS and tetraalkylammonium dodecyl sulfates

This article describes the use of capillary electrophoresis (CE) to examine the influence of different cations (C(+); C(+) = Na(+) and tetra-n-alkylammonium, NR(4)(+), where R = Me, Et, Pr, and Bu) on the rates of denaturation of bovine carbonic anhydrase II (BCA) in the presence of anionic surfactant dodecylsulfate (DS(-)). An analysis of the denaturation of BCA in solutions of Na(+)DS(-) and NR(4)(+)DS(-) (in Tris-Gly buffer) indicated that the rates of formation of complexes of denatured BCA with DS(-) (BCA(D)-DS(-)(n,sat)) are indistinguishable and independent of the cation below the critical micellar concentration (cmc) and independent of the total concentration of DS(-) above the cmc. At concentrations of C(+)DS(-) above the cmc, BCA denatured at rates that depended on the cation; the rates decreased by a factor >10(4) in the order of Na(+) ≈ NMe(4)(+) > NEt(4)(+) > NPr(4)(+) > NBu(4)(+), which is the same order as the values of the cmc (which decrease from 4.0 mM for Na(+)DS(-) to 0.9 mM for NBu(4)(+)DS(-) in Tris-Gly buffer). The relationship between the cmc values and the rates of formation of BCA(D)-DS(-)(n,sat()) suggested that the kinetics of denaturation of BCA involve the association of this protein with monomeric DS(-) rather than with micelles of (C(+)DS(-))(n). A less-detailed survey of seven other proteins (α-lactalbumin, β-lactoglobulin A, β-lactoglobulin B, carboxypeptidase B, creatine phosphokinase, myoglobin, and ubiquitin) showed that the difference between Na(+)DS(-) and NR(4)(+)DS(-) observed with BCA was not general. Instead, the influence of NR(4)(+) on the association of DS(-) with these proteins depended on the protein. The selection of the cation contributed to the properties (including the composition, electrophoretic mobility, and partitioning behavior in aqueous two-phase systems) of aggregates of denatured protein and DS(-). These results suggest that the variation in the behavior of NR(4)(+)DS(-) with changes in R may be exploited in methods used to analyze and separate mixtures of proteins.     

Evidence of simultaneous double-electron promotion in F+ collisions with surfaces

A high-flux beam of mass-filtered F+ at low energy (100-1300 eV) was scattered off Al and Si surfaces to study core-level excitations of F0 and F+. Elastic scattering behavior for F+ was observed at energies <300 (500) eV off Al (Si) for a 90 degrees lab angle. However, above this energy threshold, orbital mixing in the hard collision step results in electronic excitation of F via molecular orbital promotion along the 4f sigma (F-2p), significantly reducing the observed ion exit energy. In addition, despite the electronegativity of F, scattering at energies >450 (700) eV off Al (Si) produces F2+-behavior which is remarkably similar to Ne+ off the same surfaces. Inelasticities measured for single collision events agree well with the energy deficits required to form (doubly excited) F** and F+** states from F0 and F+, respectively; these excited species most likely decay to inelastic F+ and F2+ via autoionization.     

Determination of chemically reduced pyrrolobenzodiazepine SJG-136 in human plasma by HPLC-MS/MS: application to an anticancer phase I dose escalation study

SJG-136 1,1'-[[(propane-1,3-diyl)dioxy]bis[(11aS)-7-methoxy-2-methylidene-1,2,3,11a-tetrahydro-5H-pyr- rolo[2,1-c][1,4]benzodiazepin-5-one]] (NSC 694501), is a bifunctional pyrrolobenzodiazepine (PBD) dimer that forms selective, irreversible, interstrand DNA cross-links via exocyclic N2 atoms of two guanine bases, with a preference for 5'PuGATCPy binding sites. SJG-136 is highly cytotoxic in human tumor cells in vitro and in human tumor xenograft models in vivo at subnanomolar concentrations and is currently in anticancer phase I clinical trials in the United Kingdom and United States. To support correlative pharmacokinetics studies, a highly sensitive HPLC-MS/MS assay was developed and validated for the reliable quantitation of SJG-136 in human plasma, using the structurally similar PBD dimer DSB-120 as an internal standard. Chemical reduction of SJG-136 to its corresponding amine (SJG-136-H(4), [M + H](+)m/z 561) improved HPLC peak resolution and sensitivity by minimizing complications that arose from the reactivity of the labile imine moieties. Plasma samples were processed by protein precipitation and centrifugal membrane dialysis; components were separated by HPLC using an Agilent Rapid Resolution HT 1.8 mm (2.1 mm x 50 mm) analytical column. The total analysis time from injection to injection was 11 min. Electrospray MS/MS detection of SJG-136-H(4) was based on the selected reaction monitoring (SRM) transition [M + H](+)m/z 561 --> 301. The analytical response ratio was linearly proportional to the plasma concentration of SJG-136 over the nominal concentration range of 25 pg/ml to 250 ng/ml, with a coefficient of determination of r > or = 0.999. The intrarun absolute %RE was < or =19.6, 14.2, and 14.0% at 0.056, 2.83, and 56.3 ng/ml, respectively. The corresponding %RSD was < or =14.9%, 9.01, and 4.59%. The interday %RSD was < or =2.72, 3.46, and 5.20%. The lower and upper limits of quantitation were 0.056 and 56 ng/ml, respectively; recovery of SJG-136 from plasma was > or = 62% across the validated concentration range. The sensitivity of the validated assay was sufficient to detect SJG-136 in human subjects for up to 6 h after intravenous administration of 6 microg/m(2), the starting dose of an NCI-sponsored dose escalation study.     

Investigation of non-nucleophilic additives for the reduction of morphological anomalies in protein arrays

Uniform spot morphology is of critical importance in the fabrication and successful use of protein arrays, and solution additives are often needed to ensure good spot quality. Whereas hydroxyl-bearing molecules such as glycerol have found wide use, in our experience these reduce the efficiency of probe immobilization (particularly in the context of aldehyde-terminated surfaces). Here, we report a series of non-nucleophilic molecules that can be used as additives to improve spot homogeneity in protein arrays. Arrayed imaging reflectometry, a label-free optical biosensing technique, has been used along with spectroscopic ellipsometry to test the spot homogeneity, antibody immobilization efficiency, and activity of antihuman IgG arrays prepared with these non-nucleophilic additives on glutaraldehyde surfaces. It has been determined that 0.1% v/v 12-crown-4 performs optimally in MPBS buffer.     

Potentiometric evaluation of calix[4]arene anion receptors in membrane electrodes: phosphate detection

Ion-selective membrane electrodes doped with the urea- or thiourea-functionalised calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-N′-(phenylureido)butyl]oxy]-26,28-dipropoxy calix[4]arene (I) and 5,11,17,23-tetra-tert-butyl-25,27-bis[[4-(N′-phenylthioureido)-butyl]oxy]-26,28-dipropoxy calix[4]arene (II), were evaluated for anion sensing. Potentiometric results show that these calixarene ionophore-based membrane electrodes exhibit a good sensitivity to aqueous solutions of the monohydrogen orthophosphate species HPO₄²⁻ in the concentration range 5.0 × 10⁻⁵ to 1.0 × 10⁻¹ M, with near-Nernstian response slopes of −33.0 and −28.0 mV dec⁻¹ for ionophores I and II, respectively. Selectivity coefficient values for monohydrogen orthophosphate over a range of common anions were determined by the fixed interference and matched potential methods and indicated that these membrane electrodes exhibit a good selectivity for HPO₄²⁻ with respect to the other anions, including sulfate and nitrate.     

Reversible pyranyl complex formation and the mechanism of rearrangement to (η-6-oxocycloheptadienyl)Mn(CO)3 complexes in the reaction of β-cyclomanganated 1,5-diarylpenta-1,4-dien-3-ones and alkynes; the crystal structure of [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η]tricarbonylmanganese

[1-Phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1a) reacts with PhCCH in CCl₄ at room temperature to form [2,4-diphenyl-6-(2-phenylethenyl)pyranyl-η⁵]tricarbonylmanganese (2a), whose X-ray crystal structure is reported to complement that of its isomer [6-oxo-2,4,7-triphenylcyclohepta-1,4-dienyl-1,2,3,4,5-η]tricarbonylmanganese (3a), previously obtained from the reaction under reflux; but for 1a and PhCCPh the pyranyl complex cannot be isolated before rearrangement to the 3a analogue occurs. More forcing reaction conditions for 1a with Me₃SiCCH and for [1-(2-trifluoromethylphenyl)-2-[(E)-3-(2-trifluoromethylphenyl)prop-2-en-1-oyl-κO]ethenyl-κC¹]tetracarbonylmanganese (1b) with Me₃SiCCH and PhCCH give new analogues of 3a where previously only 2a analogues had been isolated.The reaction in CCl₄ under reflux of PhCCH and the β-deuterio analogue of 1a, [1-phenyl-2-[(E)-3-phenylprop-2-en-1-oyl-3d-κO]ethenyl-κC¹]tetracarbonylmanganese, gave deuteriated 3a with exo-D at the α-carbon, C7. This is inconsistent with the Mn-mediated Ph migration mechanism originally proposed to accommodate the endo position of Ph in 3a, and instead it implicates a cyclopropyl carbonyl-addition intermediate or a cyclopropyl acyl-substitution transition state in the key rearrangement step for 2a → 3a.