One-pot Synthesis,Crystal Structures and Antimicrobial Activities of Two New 1,4-Disubstituted 1,2,3-Triazole-4-Carboxylates

Two new 1,4-disubstituted 1,2,3-triazoles-4-carboxylates were synthesized via click reaction. Compound 1a was synthesized by the interaction of 6-nitro-tetrazolo[1.5-a]-pyridine with ethyl propynoate at room temperature in the presence of Cu(OAc)2 as a catalyst and THF as solvent. Compound 1b was also synthesized by the same manner except that tert-butyl propionate, instead of ethyl propynoate, was used. The compounds were characterized by IR, 1H-NMR, 13C-NMR and single-crystal X-ray diffraction analysis. Compound 1a(C10H9N5O4) crystallizes in the triclinic system, space group P1 with a = 5.0894(9), b = 8.9834(13), c = 13.089(2) ?, α= 83.041(7), β= 80.256(7), γ=87.296(8)°, V = 585.24(16)?3, Z = 2, Mr = 263.22, crystal size(mm) = 0.37 × 0.20 ×0.18,(I 2σ(I)) = 8557, 2493, 1229, Rint = 0.057. Compound 1b(C12H13N5O4) crystallizes in the monoclinic system, space group P21/c with a = 6.8854(5), b = 21.783(2), c = 9.3986(8) ?,β = 93.239(4)°, V = 1407.4(2)?3, Z = 4, Mr = 291.27, crystal size(mm) = 0.38 × 0.22 × 0.20,(I 2σ(I)) = 11842, 3172, 1866, Rint = 0.047. Antimicrobial assay results showed that the title compounds display excellent activities to different bacterial and fungal strains.     

Depolymerization Study of Pakistani Lignite Coal Influence of Pre‐treatments on Product Slate

Influence of pretreatments, i.e., demineralization and pre‐soaking in some solvents on the yields of liquefied products obtained from hydro‐depolymerization of Pakistani coal in a pool of hydrogen has been discussed. Results of hydrogenation experiments demonstrated that demineralizing the coal sample prior to liquefaction caused the yields to decrease compared with the virgin coal samples. The contribution of mineral matter of coal has been evaluated by comparing the yields of liquid products of virgin and leached samples. Increase in the yields obtained from the hydrogenation experiments of swollen coal samples was not satisfactorily significant.     

A photochemical method for patterning the immobilization of ligands and cells to self-assembled monolayers

This work describes a chemically well defined method for patterning ligands to self-assembled monolayers (SAMs) of alkanethiolates on gold. This method begins with monolayers presenting a nitroveratryloxycarbonyl (NVOC)-protected hydroquinone which is photochemically irradiated to reveal a hydroquinone group. The resulting hydroquinone is then oxidized to the corresponding benzoquinone, providing a site for the Diels-Alder mediated immobilization of ligands. The rate constant for the photochemical deprotection is 0.032 s(-1) (with an intensity of approximately 100 mW/cm(2) between 355 and 375 nm), corresponding to a half-life of 21 s. The hydroquinone is oxidized to the benzoquinone using either electrochemical or chemical oxidation and then functionalized by reaction with a cyclopentadiene-tagged ligand. Two methods for patterning the immobilization of ligands are described. In the first, the substrate is illuminated through a mask to generate a pattern of hydroquinone groups, which are elaborated with ligands. In the second method, an optical microscope fit with a programmable translational stage is used to write patterns of deprotection which are then again elaborated with ligands. This technique is characterized by the use of well-defined chemical reactions to control the regions and densities of ligand immobilization and will be important for a range of applications that require patterned ligands for biospecific interactions.     

聚合物涂层在毛细管电泳分离蛋白中的研究进展

毛细管电泳具有分析时间短,分离效率高,样品消耗量少等优点,在生物样品分离,特别是蛋白质分析领域有重要应用。然而,毛细管内壁硅羟基的解离给分离结果带来诸多不良影响。聚合物涂层能够抑制蛋白质在毛细管内壁的吸附以及调控电渗流,故对毛细管内壁进行有效修饰能够提高其对蛋白质的分离效率及分离稳定性。该文主要综述了动态及静态聚合物涂层毛细管的最新研究进展,并概述了近些年基于多巴胺/聚多巴胺发展起来的涂层毛细管的研究进展,最后展望了聚合物涂层毛细管的发展趋势。     

Flow Injection Chemiluminescence Method for Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Tris(2,2'-bipyridyl)ruthenium(II) Chloride-diperiodatocuprate(III) Reaction

Asensitive and selective method employing chemiluminescence(CL) coupled with flow injection(FI) is reported for nalbuphine hydrochloride(NAL) assay in pharmaceutical formulations. The enhancement effect of NAL on the CL reaction between tris(2,2'-bipyridyl)ruthenium(II) chloride-diperiodatocuprate(III) {Ru[(bpy)₃]²⁺-Cu(III) complex} in acidic medium is used as analytical measurement. The optimal conditions of the CL reaction were sulfuric acid 1.0×10^-3 mol/L, Ru[(bpy)₃]²⁺ 7.5×10^-5 mol/L, Cu(III)/Ag(III) complexes 4.0×10^-4/5.0×10^-4 mol/L, sample loop volume of 120 μL and flow rate of 2.5 mL/min. The sensitivities of the method in terms of detection(S/N=3) and quantification(S/N=10) limits are 5×10^-4 and 0.001 ppm(1 ppm=1 mg/L), respectively. The linear response of the instrument in the form of CL intensity with respect to NAL concentration is over the range 0.001-15.0 ppm(R²=0.9999) with relative standard deviation from 0.8% to 3.2% and injection throughput of 120 injection/h. The applications of the method include the quantitative analysis of NAL in pharmaceutical injection samples. Variations and the average results of the proposed method are not signi-ficantly different from the results of a reported method by applying F- and paired student t-test. The most likely CL reaction mechanism is written in accordance with spectrophotometric and CL studies.     

对硝基苯酚分子印迹聚合物最佳功能单体的筛选及其水样固相萃取中的应用

以对硝基苯酚(4-NP)为对象,采用非印迹聚合物(NIP)库筛选法选出乙烯基咪唑为最佳功能单体,通过实验选出乙腈为最合适的聚合溶剂、三甲氧基丙基三甲基丙烯酸酯(TRIM)为交联剂制备分子印迹聚合物。对固相萃取进行了优化,用pH=2.5的磷酸盐缓冲溶液上样、体积比为45∶55的乙腈和磷酸盐缓冲溶液淋洗、甲醇洗脱条件下,聚合物具有最佳印迹效果。4-NP分子印迹聚合物的表观吸附量达到5.8 mg/g。该印迹聚合物对4-NP及其结构类似物苯酚和对氯苯酚的萃取回收率分别为96.0%、78.8%和77.8%,表明具有较高的选择性,还成功地用于自来水样品中4-NP的固相萃取,回收率达到93.1%。由此可得该方法快速、有效,可用于分子印迹聚合物优化制备。     

Development of Yttrium and Iron Oxide Thin Films via AACVD Method for Photooxidation of Water

Russian Journal of Applied Chemistry - Owing to high stability, metal oxide-based ceramic thin films are of great interest for photocatalytic oxidation of water. Therefore, the current research is...     

Stochastic vs deterministic programming in water management: the value of flexibility

In the paper we develop a two stage scenario-based stochastic programming model for water management in the Indus Basin Irrigation System (IBIS). We present a comparison between the deterministic and scenario-based stochastic programming model. Our model takes stochastic inputs on hydrologic data i.e. inflow and rainfall. We divide the basin into three rainfall zones which overlap on 44 canal commands. Data on crop characteristics are taken on canal command levels. We then use ten-daily and monthly time intervals to analyze the policies. This system has two major reservoirs and a complex network of rivers, canal head works, canals, sub canals and distributaries. All the decisions on hydrologic aspects are governed by irrigation and agricultural development policies. Storage levels are maintained within the minimum and maximum bounds for every time interval according to a power generation policy. The objective function is to maximize the expected revenue from crops production. We discuss the flexibility of two stochastic optimization models with varying time horizon.