High Na+ Mobility in rGO Wrapped High Aspect Ratio 1D SbSe Nano Structure Renders Better Electrochemical Na+ Battery Performance

We chose to understand the cyclic instability and rate instability issues in the promising class of Na⁺ conversion and alloying anodes with Sb₂Se₃ as a typical example. We employ a synthetic strategy that ensures efficient rGO (reduced graphene oxide) wrapping over Sb₂Se₃ material. By utilization of the minimum weight of additive (5 wt.% of rGO), we achieved a commendable performance with a reversible capacity of 550 mAh g⁻¹ at a specific current of 100 mA g⁻¹ and an impressive rate performance with 100 % capacity retention after high current cycling involving a 2 Ag⁻¹ intermediate current step. The electrochemical galvanostatic intermittent titration technique (GITT) has been employed for the first time to draw a rationale between the enhanced performance and the increased mobility in the rGO wrapped composite (Sb₂Se₃-rGO) compared to bare Sb₂Se₃. GITT analysis reveals higher Na⁺ diffusion coefficients (approx. 30 fold higher) in the case of Sb₂Se₃-rGO as compared to bare Sb₂Se₃ throughout the operating voltage window. For Sb₂Se₃-rGO the diffusion coefficients in the range of 8.0×10⁻¹⁵ cm² s⁻¹ to 2.2×10⁻¹² cm² s⁻¹ were observed, while in case of bare Sb₂Se₃ the diffusion coefficients in the range of 1.6×10⁻¹⁵ cm² s⁻¹ to 9.4×10⁻¹⁵ cm² s⁻¹ were observed.     

Nano-sized local magnetic field induced by circular motion of ions and molecules in a nanotorus under gigahertz rotating electric fields

Recently, we reported molecular dynamics simulations of stable cyclotron motions of ions and water molecules in a carbon nanotorus, induced by different rotating electric fields (EFs). This study is devoted to the calculation and characterisation of the magnetic field (MF) induced by these cyclotron motions. Results show that carbon nanotorus containing ions or water molecules acts as an EF-to-MF transducer. Components of the instantaneous induced MF show large-scale oscillations superimposed by strong fluctuations arising respectively from overall circular motion and random collisions of moving species. Analysis of the space-dependencies of the induced MF components shows that the induced MF is maximum at the centre of the nanotorus. The MF induced by cyclotron motion of ions follows the orders B(Ca²⁺)?>?B(Na⁺)?≈?B(K⁺) at E?=?1.0?V/nm and B(E?=?1.0?V/nm)?>?B(E?=?0.5?V/nm)?>?B(E?=?0.1?V/nm). The time-averaged induced MF of the cyclotron motion of 81 water molecules is almost 10² times stronger than that of ions. The induced MF strength is decreased with increasing distance from nanotorus and decays effectively at about 17.3–18.1 and 15.9–18.2?nm along the z-axis of the nanotorus for ions and water molecules, respectively. The magnitude of the MF induced by cyclotron motions of water molecules and ions, respectively, decreases and increases in the nanotorus with freed carbon atoms.     

Structural,dielectric and ac conductivity properties of Ni-doped HoFeO3 before and after gamma irradiation

A series of samples of HoFe_1?x Ni _x O₃ (x = 0.0, 0.1, 0.3) were prepared using the solid-state reaction technique to understand the structural, dielectric and conductivity properties before and after gamma irradiation of accumulated dose of 625 KGy. The X-ray diffraction confirms that all the samples exist in single-phase orthorhombic structure having space group Pbnm. With increasing dopant Ni, the unit cell volume and lattice parameters undergo small change. X-ray analysis show change in the interplanar spacing and full width at half maximum values after gamma irradiation. The Raman spectra of the samples show modifications after gamma irradiation. It can be easily seen that after gamma irradiation intensity, peak width are completely altered by gamma-absorbed dose. Measurement of dielectric loss and dielectric constant at room temperature was performed before and after gamma irradiation in the frequency range of 20 Hz–1 MHz. It is observed that the value of dielectric constant decreases after irradiation. The ac conductivity is estimated from the dielectric constant and loss tangent. Exposure to gamma radiation results in substantial modification in the physical properties of the Ni-doped Ho-based orthoferrites.     

Application of modified multiwalled carbon nanotubes for palladium preconcentration and determination in water and soil samples by flame atomic absorption spectrometry

A new solid-phase extraction method for determination of palladium by atomic absorption spectrometry is described. Multiwalled carbon nanotube (MWCNT) modified with 1-butyl 3-methyl imidazolium hexafluorophosphate (MWCNT-[BMIM]PF₆) and supported on sawdust was used as an adsorbent for preconcentration of palladium. Palladium ions are retained on (MWCNT-[BMIM]PF₆) adsorbent as [PdI₄]^2? and eluted from the column with a thiosulfate–ammonia mixture. The optimum conditions for the adsorption were evaluated by changing various parameters such as pH, sample volume, concentration and volume of eluent, iodide concentration and interfering ions to achieve highest sensitivity and selectivity. The calibration graph was linear in the range of 2–120 ng mL^?1 of palladium in the initial solution and the limit of detection based on 3S_b was 0.41 ng mL^?1. The method was applied to the determination of palladium in water, wastewater and soil samples.     

Photoreactivity of ethanolamine with octacyanomolybdate(IV) and octacyanotungstate(IV)

Irradiation of [M(CN)8]4– (M = Mo or W) in the ligand field band region causes the substitution of CN– by OH– in alkaline medium, resulting in the generation of [M(CN)7OH]4–. This species reacts with ethanolamine (EOA) in 1:1 stoichiometry. The rate constant has been determined spectrophotometrically at constant ionic strength. The rate constant and the quantum yield decrease with increasing complex concentration and increase with increasing EOA concentration and pH. The isosbestic point in the electronic spectra observed at later stages of irradiation signifies the formation of complexes in successive stages. An associative mechanism is proposed.     

Image Defogging Framework Using Segmentation and the Dark Channel Prior

Foggy images suffer from low contrast and poor visibility problem along with little color information of the scene. It is imperative to remove fog from images as a pre-processing step in computer vision. The Dark Channel Prior (DCP) technique is a very promising defogging technique due to excellent restoring results for images containing no homogeneous region. However, having a large homogeneous region such as sky region, the restored images suffer from color distortion and block effects. Thus, to overcome the limitation of DCP method, we introduce a framework which is based on sky and non-sky region segmentation and restoring sky and non-sky parts separately. Here, isolation of the sky and non-sky part is done by using a binary mask formulated by floodfill algorithm. The foggy sky part is restored by using Contrast Limited Adaptive Histogram Equalization (CLAHE) and non-sky part by modified DCP. The restored parts are blended together for the resultant image. The proposed method is evaluated using both synthetic and real world foggy images against state of the art techniques. The experimental result shows that our proposed method provides better entropy value than other stated techniques along with have better natural visual effects while consuming much lower processing time.     

Role of gadolinium(III) complex in improving thermal stability of polythiophene composite

This paper involves the preparation of polythiophene (PTP) and its composite by the oxidative polymerisation method by using ferric chloride as an oxidant and thiophene monomer. The gadolinium(III) complex obtained by the refluxing technique was used as dopant in the PTP matrix. On the basis of the spectroscopic characterisation, seven-coordinate geometry is proposed for the complex. Conductance measurement confirms the non-selectrolyte nature of complex. The PTP and its composite were subjected to FTIR, X-ray diffraction and scanning electron microscope techniques. The powder X-ray diffraction pattern showed the high crystalline nature of the complex which in turn developed a good degree of crystallinity in the PTP composite. The average particle size was calculated as 4.655 Å and 3.737 Å for the dopant and PTP composite, respectively, by using Debye Scherrer’s equation. Thermal analysis was performed by thermogravimetric (TG) analysis, differential thermal analysis (DTA) and differential scanning calorimetry (DSC) techniques. The TG, DTA and DSC results were well-correlated. The thermal analysis revealed the high thermal stability of the dopant which in turn improved the thermal stability of the PTP composite, revealing the potential of the composite for high temperature applications.     

Synthesis, characterization, and thermal study of polyaniline composite with the photoadduct of potassium hexacyanoferrate (II) involving hexamine ligand

The present paper involves the synthesis of polyaniline (PANI) composite with photoadduct of potassium hexacyanoferrate (II) involving hexamine as a ligand and cobalt chloride as a complexing agent via in situ oxidative polymerization by ammonium persulphate. The photoadduct has been synthesized by photoirradiation followed by substitution with the hexamine ligand. The final product has been isolated by using CoCl₂ as complexing agent. Viscosity average molar mass has been determined by viscosity method using Ostwald’s viscometer. The photoirradiation, substitution, and successful synthesis have been proved by recording pH, UV–visible spectra before and after irradiation, and FTIR of the photoadduct. The composite based on the synthesized photoadduct has been subjected to FTIR, X-ray diffraction, and SEM characterization techniques. Thermal analysis has been done by using TG and DSC technique. FTIR absorption peaks confirm the insertion of photoadduct in the backbone of PANI. SEM of the composite also supports its successful synthesis. The XRD of photoadduct shows crystalline structure, which has remained dominant in the composite, hence proving the successful synthesis of PANI composite with photoadduct. Thermal analysis shows high thermal stability of photoadduct which in turn has improved the thermal stability of PANI composite, therefore, shows the potential of composite for high-temperature application purposes.