A novel sequential aminodiene Diels-Alder strategy for the rapid construction of substituted analogues of Kornfeld's ketone

Through a novel sequence of aminodiene Diels-Alder reactions, amidofurans 18a-c were converted to tricyclic ketones 21a-c in moderate to good yields. Ketone 21a could be converted to Uhlé's ketone (6) by cleaving the tert-butyl carbamate and oxidatively removing the methyl ester. Tricycle 21a readily underwent bromination to give 22. Formation of the corresponding enol triflate 25 followed by carbonylation gave ester 27, which was then coupled with N-methyl propriolamide to furnish 26. [reaction: see text]     

Phase Equilibria in the Ni–Al–W System at 900°C

Multicomponent Ni-base alloys exhibit good mechanical properties even at elevated temperatures and they are widely used for industrial production of exertion-resistive parts of engines. These properties are mainly determined by the coexistence of a disordered γ matrix with a face centred cubic lattice and cuboidal domains of its ordered γ′ structure. Therefore it is useful to study phase equilibria in Ni-base systems, namely in the regions involving both mentioned phases. One of the conclusions of our recent work on Ni–Al–Cr–W system was a necessity of modification of selected thermodynamic parameters of the ternary Ni–Al–W subsystem in order to achieve a better agreement of our experimental observations with theoretical modelling. This involves new measurements of the microstructure of selected samples of the Ni–Al–W system at 900°C and the comparison of the results with existing literature data in order to confirm our conclusions on higher order system investigated before. It is a first step on the way to an assessment of the Ni–Al–W system, which has not been done before.     

Conformational Analysis of 1,2:3,4-Diepoxides: Ab Initio and semiempirical molecular-orbital calculations

Using semiempirical and ab initio procedures, the most stable conformations of meso- and rac-bioxirane and of some substituted 1,2:3,4-diepoxides were calculated. For threo-diepoxides (having the same relative configurations as rac-bioxirane, 3 ), two stable conformations with CCCC dihedral angles of ca. 90 and ca. 270° were found. For erythro-diepoxides (derivatives of meso-bioxirane, 4 ) the calculations suggest three preferred conformations with corresponding dihedral CCCC angles of ca. 90°, ca. 180°, and ca. 270°. The calculations are in fair agreement with the experimental data available for the unsubstituted compounds 3 and 4 .     

Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.     

Identification,Quantification, and Characterization of the Phenolic Fraction of Brunfelsia grandiflora: In Vitro Antioxidant Capacity

Brunfelsia grandiflora is an ancient plant widely used for its promising medicinal properties, although little explored scientifically. Despite being a rich source of phenolic compounds responsible in part for the proven anti-inflammatory activity, its characterization has not been carried out to date. The present work deals with the exhaustive identification and quantification of its phenolic fraction, along with its antioxidant activity. Decoction resulting from the bark as fine powder was filtered and lyophilized, and polyphenols were extracted from the resulting product by aqueous-organic solvents. Seventy-nine polyphenols were identified using LC-MSⁿ. Hydroxycinnamates was the most abundant group of compounds (up to 66.8%), followed by hydroxycoumarins (15.5%), lignans (6.1%), flavonols (5.7%), phenolic simples (3.1), gallates (2.3%), flavanols (0.3%), and flavanones (0.2%). About 64% of the characterized phenols were in their glycosylated forms. The quantification of these phytochemicals by LC-QToF showed that this medicinal plant contained 2014.71 mg of phenolic compounds in 100 g dry matter, which evidences a great antioxidant potency determined by ABTS and DPPH assays. Therefore, Brunfelsia grandiflora represents an important source of polyphenols which supports its therapeutic properties scientifically proven.     

Directional fluorescence spectra of laser dye in opal and inverse opal photonic crystals

We have investigated the fluorescence from R6G dye molecules embedded in fcc photonic crystals with a large range of lattice parameters. Both polystyrene opals and alumina inverse opals are studied, allowing us to compare direct and inverted structures. We observe clear stop bands in the fluorescence spectra, whose center positions, widths, and depths are analyzed and compared to stop bands from reflectivity measurements. In the frequency range of first-order stop gaps, the measured stop band centers and widths agree well with theoretical predictions. The depths are interpreted in terms of the mean free path (disorder) and the Bragg attenuation length (order). We observe intriguing enhanced emission at the blue side of the stop bands, which is attributed to the escape of diffuse light from the photonic crystal (related to both order and disorder). We perform the first experiments in the range of second-order stop gaps, which is the regime where the photonic band gap is anticipated. We observe complex multiple-Bragg features that correlate favorably with reflectivity peaks.     

Versuche mit markierten Atomen über den Mechanismus der Vermehrung von Tabakmosaikvirus in Nicotiana tabacum

Zusammenfassung Tabakmosaikvirus hoher spezifischer Aktivität, das am Phosphor und/oder Kohlenstoff markiert war, wurde biosynthetisch hergestellt. Damit wurde jeweils ein Blatt einer Pflanze von Nicotiana tabacum infiziert und der etwaige Transport von intaktem Virus durch das Leitungssystem der Pflanzen dadurch weitgehend unterbunden, daß die Leitgefäße des behandelten Blattes durchtrennt wurden.Das aus den unbehandelten Blättern der Pflanze nach 17 1/2, 48 und 72 Stdn. isolierte Virus wies im Vergleich zum eingesetzten TMV einen viel geringeren Anteil an Gesamtradiokohlenstoff im Protein auf. Dies deutet darauf hin, daß das Virus der unbehandelten Blätter höchstens zu einem sehr geringen Teil aus intakt transportiertem TMV bestehen könnte.Die nicht im TMV enthaltenen Polynukleotide der unbehandelten Blätter enthalten 7 Stdn. nach der Infektion verhältnismäßig viel³²P, doch tritt derselbe innerhalb 70 Stdn. zum allergrößten Teil in niedermolekulare Verbindungen über.Die in Puffer unlöslichen Polynukleotide der unbehandelten Blätter (Blattnukleinsäure) weisen ein mit der Zeit abnehmendes Verhältnis von³²P/¹⁴C auf. Auch innerhalb der Nukleinsäure (NS) des TMV dieser Blätter nimmt dieses Verhältnis zunächst ab, steigt aber später wieder an.Die angeführten Ergebnisse stehen mit der Vorstellung im Einklang, daß das Virus NS abspaltet und sowohl die systemische Infektion der Pflanze wie auch die Virusvermehrung mindestens zum Teil durch diese freie NS bewirkt wird. Die aus dem Virus stammende freie NS unterliegt zum großen Teil lebhaftem Abbau, wobei ihre Komponenten wahrscheinlich dem Aufbau normaler Blattbestandteile dienen.Mit 3 Abbildungen     

Effect of crystallographic structure on electrical and mechanical characteristics of Sm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Doped CeO<Subscript>2</Subscript> films

Electrical conductivity, dielectric permittivity and mechanical hardness of the polycrystalline CeO₂ + xSm₂O₃ (x = 0, 10.9–15.9 mol %) films prepared by Electron Beam Physical Vapour Deposition (EB-PVD) and Ionic Beam Assisted Deposition, (IBAD), techniques were investigated in dependence on their structure and microstructure influenced by the deposition conditions, namely composition, deposition temperature and Ar⁺ ion bombardment. The electrical conductivity of doped ceria prepared without Ar⁺ ion bombardment and investigated by the impedance spectroscopy, IS, was found to be predominantly ionic one under the oxidizing atmosphere/low-temperature conditions and the higher amounts of Sm₂O₃ (>10 mol %) used. The bulk conductivity as a part of total measured conductivity was a subject of interest because the grain boundary conductivity was found to be ∼3 orders of magnitude lower than the corresponding bulk conductivity. Ar⁺ ion bombardment acted as a reducer (Ce⁴⁺ → Ce³⁺) resulting in the development of electronic conductivity. Dielectric permittivity determined from the bulk parallel capacitance measured at room temperature and the frequency of 1 MHz, similarly as the mechanical hardness measured by indentation (classical Vickers and Depth Sensing Indentation-DSI) techniques were also found to be dependent on the deposition conditions. The approximative value of hardness for the investigated films deposited on the substrate was estimated using a simple phenomenological model described by the power function HV = HV ₀ + aP ^b and compared with the so-called apparent hardness (substrate + investigated film) determined by the classical Vickers formula. Results obtained are analyzed and discussed.