An effect of application of chiral aluminium alkoxides and amides as adducts to zirconium catalyzed carbo- and cycloalumination of olefins

This paper is dedicated to a study of properties of the following novel optically active organoaluminium compounds (OACs): (1S,2S)-l,7,7-trimethyl-2-[(dialkylalumina)oxy]-bicyclo[2.2.1]heptanes and (1S)-N-(dialkylalumina)-6,7-dimethoxy-1-methyl-1,2,3,4- tetrahydroisoquinolines. The synthesis of the chiral OACs was carried out in the reaction of either natural camphor or salsolidine with both AlEt₃ and i-Bu₂AlH. The main goal of the research was to investigate the stereodifferentiating activity of the chiral OACs in the olefin carbo- and cycloalumination reactions, catalyzed by Cp₂ZrCl₂.     

Thermodynamic study of a series lithium β-diketonates

Thermal behaviour of a series of lithium β-diketonates: Li(dpm) (dpm=dipivaloylmethanate (2,2,6,6-tetramethylheptane-3,5- dionate)), Li(pta) (pta=pivaloyltrifluoracetonate (2,2-dimethyl-6,6,6-trifluoro-3,5-hexanedionate)), Li(tfa) (tfa=trifluoracetylacetonate (1,1,1-trifluoro-2,4-pentandionate)), Li(hfa) (hfa=hexafluoracetylacetonate (1,1,1,5,5,5-hexafluoro-2,4-pentandionate)) has been investigated. Gas phase composition of these complexes has been established. Temperature dependences of vapor pressure of lithium compounds were obtained by static and dynamic methods, and thermodynamic parameters were calculated. Dependence of compound volatility on ligand structure is shown. For Li(dpm) detailed investigation has been done by differential scanning calorimetry (DSC).     

Coherent effects in energy transport in model dendritic structures investigated by ultrafast fluorescence anisotropy spectroscopy

Measurements of ultrafast fluorescence anisotropy decay in model branched dendritic molecules of different symmetry are reported. These molecules contain the fundamental branching center units of larger dendrimer macromolecules with either three (C(3))- or four (T(d), tetrahedral)-fold symmetry. The anisotropy for a tetrahedral system is found to decay on a subpicosecond time scale (880 fs). This decay can be qualitatively explained by F?rster-type incoherent energy migration between chromophores. Alternatively, for a nitrogen-centered trimer system, the fluorescence anisotropy decay time (35 fs) is found to be much shorter than that of the tetramers, and the decay cannot be attributed to an incoherent hopping mechanism. In this case, a coherent interchromophore energy transport mechanism should be considered. The mechanism of the ultrafast energy migration process in the branched systems is interpreted by use of a phenomenological quantum mechanical model, which examines the two extreme cases of incoherent and coherent interactions.     

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.     

A Watersoluble Sulfonatomethylated Calix[4]resorcinarene as Artificial Receptor of Metal Complexes

The binding of different sized and shaped metal complexes [Co(His)₂]ClO₄(1), [Co(en)₂C₂O₄]Cl (2) and [K18-crown-6]SCN (3)(en-ethylendiamine, His-L-histidynate-anion) with a new tetrasulfonatomethylcalix[4]resorcinarene([H₈X]Na4) was investigated in neutral and alkaline aqueous media by NMR and pH-metrictitration methods and compared with those of recently studied NMe₄Br (4). The resultsobtained indicate that the outer-sphere coordination of complexes 1–3 by[H₈X]^4- proceeds via the interaction of hydrophobic fragments of the guestswith both the negatively charged rim and the hydrophobic cavity as a -base. Thenature of binding does not change for cations 1, 2 and 4 on going from[H₈X]^4- in neutral to [H₄X]^8- in alkaline media, while the inclusionof 3 decreases on going from [H₈X]^4- to [H₄X]^8-.     

Metal-templated diyne cyclodimerization and cyclotrimerization

Reaction of [Pt(CH3)2(COD)] (COD = 1,5-cyclooctadiene) with Ph2PCCCCPPh2 led to a mixture of [{Pt(CH3)2}2(mu-Ph2PC4PPh2)2] (1) and [{Pt(CH3)2}3(mu-Ph2PC4PPh2)3] (2). Reaction of [PtCl2(COD)] with Ph2PCCCCPPh2 led to a mixture of the thermally unstable compounds [{PtCl2}2(mu-Ph2PC4PPh2)2] (3) and [{PtCl2}3(mu-Ph2PC4PPh2)3] (4) which transform into [{PtMe2}2{mu-C8(PPh2)4}] (5) and [{PtMe2}3{mu3-C12(PPh2)6}] (6) containing 8-membered diene-diyne and 12-membered triene-triyne rings, respectively. Compound 2 can be converted to [{PtMe2}3{C12(PPh2)6}] (7) by heating with CuCl at 80 degrees C, while 1 can be heated without significant cycloaddition.     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.     

Causes of the double maximum conductivity of nanocomposite polymer electrolytes for lithium power sources

1. Download high-res image (158KB)
2. Download full-size image

     

Copper‐Polymer Nanocomposite Catalyst for Synthesis of 1,4‐Diphenylbutadiyne‐1,3

A new catalyst for cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3 was prepared by thermolysis of copper(II) poly‐5‐vinyltetrazolate. It presents heterogeneous catalyst, in which copper nanoparticles are supported on polymeric matrix surface. The catalyst is recovered, recycled, and shows high catalytic activity in cross‐coupling synthesis of 1,4‐diphenylbutadiyne‐1,3. The reaction proceeds in aerobic conditions at room temperature in the presence of pyridine.     

Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.