An effect of application of chiral aluminium alkoxides and amides as adducts to zirconium catalyzed carbo- and cycloalumination of olefins

This paper is dedicated to a study of properties of the following novel optically active organoaluminium compounds (OACs): (1S,2S)-l,7,7-trimethyl-2-[(dialkylalumina)oxy]-bicyclo[2.2.1]heptanes and (1S)-N-(dialkylalumina)-6,7-dimethoxy-1-methyl-1,2,3,4- tetrahydroisoquinolines. The synthesis of the chiral OACs was carried out in the reaction of either natural camphor or salsolidine with both AlEt₃ and i-Bu₂AlH. The main goal of the research was to investigate the stereodifferentiating activity of the chiral OACs in the olefin carbo- and cycloalumination reactions, catalyzed by Cp₂ZrCl₂.     

Isotopic production cross sections of residues in reactions induced by relativistic heavy ions with protons and deuterons

The isotopic production cross sections of heavy residues in relativistic heavy-ion collisions have been investigated in inverse kinematics. The primary reaction products were fully identified in mass and atomic number prior to beta decay using the fragment separator FRS. The huge collection of data obtained helps in the understanding of the two main reaction mechanisms involved: fragmentation and fission. These data provide basic information for future radioactive ion beam facilities and for technical applications like intense neutron sources by means of spallation targets.     

Thermodynamic study of a series lithium β-diketonates

Thermal behaviour of a series of lithium β-diketonates: Li(dpm) (dpm=dipivaloylmethanate (2,2,6,6-tetramethylheptane-3,5- dionate)), Li(pta) (pta=pivaloyltrifluoracetonate (2,2-dimethyl-6,6,6-trifluoro-3,5-hexanedionate)), Li(tfa) (tfa=trifluoracetylacetonate (1,1,1-trifluoro-2,4-pentandionate)), Li(hfa) (hfa=hexafluoracetylacetonate (1,1,1,5,5,5-hexafluoro-2,4-pentandionate)) has been investigated. Gas phase composition of these complexes has been established. Temperature dependences of vapor pressure of lithium compounds were obtained by static and dynamic methods, and thermodynamic parameters were calculated. Dependence of compound volatility on ligand structure is shown. For Li(dpm) detailed investigation has been done by differential scanning calorimetry (DSC).     

Coherent effects in energy transport in model dendritic structures investigated by ultrafast fluorescence anisotropy spectroscopy

Measurements of ultrafast fluorescence anisotropy decay in model branched dendritic molecules of different symmetry are reported. These molecules contain the fundamental branching center units of larger dendrimer macromolecules with either three (C(3))- or four (T(d), tetrahedral)-fold symmetry. The anisotropy for a tetrahedral system is found to decay on a subpicosecond time scale (880 fs). This decay can be qualitatively explained by F?rster-type incoherent energy migration between chromophores. Alternatively, for a nitrogen-centered trimer system, the fluorescence anisotropy decay time (35 fs) is found to be much shorter than that of the tetramers, and the decay cannot be attributed to an incoherent hopping mechanism. In this case, a coherent interchromophore energy transport mechanism should be considered. The mechanism of the ultrafast energy migration process in the branched systems is interpreted by use of a phenomenological quantum mechanical model, which examines the two extreme cases of incoherent and coherent interactions.     

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 1: Unvulcanized unstabilized polyisoprene

The thermal oxidation of an unvulcanized, unstabilized polyisoprene rubber (IR) has been studied in the 40-140 °C temperature range. Ageing was monitored by FTIR determination of double bonds and carbonyl groups, mass uptake measurement, and weight average molar mass determination. A mechanistic scheme based on the standard scheme for radical chain oxidation, but taking into account the diversity of initiation processes and the existence of inter- and intramolecular radical additions to double bonds, was built. The kinetic model derived from this scheme is composed of seven differential equations to be solved in discrete thickness layers to take into account the kinetic control by oxygen diffusion. This system was numerically solved using a Matlab program dedicated to stiff systems of differential equations. The elementary rate constants and other kinetic parameters were then determined from experimental data, using an inverse approach. A set of physically reasonable parameter values was obtained, thus allowing us to envisage lifetime predictions at low temperature (long term). The results led to observations difficult to make from classical analytical studies, for instance the predominance of bimolecular hydroperoxide decomposition among other initiation modes or the competition between intermolecular hydrogen abstraction and intramolecular addition of peroxy radicals to double bonds.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 2: Effect of sulfur vulcanization on mass changes and thickness distribution of oxidation products during thermal oxidation

Thermal oxidation of sulfur vulcanized polyisoprene samples was studied by gravimetry and IR mapping of carbonyl groups (to determine the oxidized layer thickness (TOL)) at temperatures ranging from 60 to 150 °C in air. Oxidation appears noticeably lower than that for the starting non-vulcanized polyisoprene, revealing a stabilizing effect of sulfur-containing species. After a short period where mass loss presumably due to water evaporation predominates, the sample mass increases until a plateau corresponding to 6.3% (at 60 °C) to 0.5% (at 140 °C) mass gain. Practically no weight gain (∼0.1%) was observed at 150 °C. The mass uptake is due to oxygen grafting to the chains. TOL varies from about 4.6 mm (70 °C) to about 1 mm (150 °C).A kinetic model, derived from a mechanistic scheme of radical chain oxidation including stabilizing events due to hydroperoxide reduction by sulfur-containing groups and taking into account the diffusion-reaction coupling, was established and numerically resolved. The model predictions for mass changes and TOL values are in good agreement with experimental data.     

A Watersoluble Sulfonatomethylated Calix[4]resorcinarene as Artificial Receptor of Metal Complexes

The binding of different sized and shaped metal complexes [Co(His)₂]ClO₄(1), [Co(en)₂C₂O₄]Cl (2) and [K18-crown-6]SCN (3)(en-ethylendiamine, His-L-histidynate-anion) with a new tetrasulfonatomethylcalix[4]resorcinarene([H₈X]Na4) was investigated in neutral and alkaline aqueous media by NMR and pH-metrictitration methods and compared with those of recently studied NMe₄Br (4). The resultsobtained indicate that the outer-sphere coordination of complexes 1–3 by[H₈X]^4- proceeds via the interaction of hydrophobic fragments of the guestswith both the negatively charged rim and the hydrophobic cavity as a -base. Thenature of binding does not change for cations 1, 2 and 4 on going from[H₈X]^4- in neutral to [H₄X]^8- in alkaline media, while the inclusionof 3 decreases on going from [H₈X]^4- to [H₄X]^8-.     

Metal-templated diyne cyclodimerization and cyclotrimerization

Reaction of [Pt(CH3)2(COD)] (COD = 1,5-cyclooctadiene) with Ph2PCCCCPPh2 led to a mixture of [{Pt(CH3)2}2(mu-Ph2PC4PPh2)2] (1) and [{Pt(CH3)2}3(mu-Ph2PC4PPh2)3] (2). Reaction of [PtCl2(COD)] with Ph2PCCCCPPh2 led to a mixture of the thermally unstable compounds [{PtCl2}2(mu-Ph2PC4PPh2)2] (3) and [{PtCl2}3(mu-Ph2PC4PPh2)3] (4) which transform into [{PtMe2}2{mu-C8(PPh2)4}] (5) and [{PtMe2}3{mu3-C12(PPh2)6}] (6) containing 8-membered diene-diyne and 12-membered triene-triyne rings, respectively. Compound 2 can be converted to [{PtMe2}3{C12(PPh2)6}] (7) by heating with CuCl at 80 degrees C, while 1 can be heated without significant cycloaddition.     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.