Synthesis of anticonvulsant sulfamides. Theoretical study of the related mechanism

A theoretical study of the mechanisms associated with the synthesis of anticonvulsant symmetric N,N-substituted sulfamides is presented. Two possible synthetic routes are compared, which mainly differ in the use of pyridine as a nucleophilic agent in the reaction mechanism. Geometry optimization techniques and transition-state detection at the B3LYP/6-31G** level, modeling the solvent by means of an isodensity polarizable continuum approach, allow the most suitable method for the experimental process to be discerned.From the Proceedings of the 28th Congreso de Químicos Teóricos de Expresión Latina (QUITEL 2002)     

Synthesis of stereo-defined α-trifluoromethyl (Tfm)-malic units

Aldol reactions of titanium enolates of N-acyl-1,3-oxazolidin-2-ones with ethyl trifluoropyruvate occurred with low to good stereoselectivity depending on the steric properties of the N-acyl group. Attempts to transform the resulting aldols into peptidomimetics incorporating stereo-defined α-trifluoromethyl (Tfm)-malic units are described.     

Studies on the synthesis of heterocyclic compounds. VII. Action of acyl halides on heterocyclic compounds containing the O-M-O (M  P,As, Sb) bond in the ring

The action of acyl halides on heterocyclic compounds of five-membered rings containing an O-M-O (M ? P, As, Sb) linkage is described. The reactions were either carried out in the presence of a solvent (benzene or toluene) or by direct heating of the reagent with the substrate. In the case of arsole, stibole and stannole derivatives, the cleavage of O-M bond and the formation of the respective mono- and diesters were always obtained, while with the phospholes, no cleavage of the compounds was observed. The products IIa-c (M = Sb) have been obtained in excellent yields starting from VIa-c and antimony trichloride. The structure of the compounds which were prepared was determined by analytical and spectroscopic methods and also by comparations with authentic samples where possible.     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

Palladium-catalyzed arylation of alpha-methylene-gamma-butyrolactone: 3-benzylfuran-2(5H)-ones vs (Z)-benzylidene-gamma-butyrolactones and their reduction to 3-benzyl-gamma-butyrolactones

[reaction: see text] The palladium-catalyzed arylation of the alpha-methylene-gamma-butyrolactone proceeds in good yields and may be directed toward the synthesis of 3-benzylfuran-2(5H)-ones when the starting aryl iodides contain strongly electron-withdrawing groups. The combined palladium-catalyzed arylation/hydrogenation of the alpha-methylene-gamma-butyrolactone represents a new simple entry into functionalized alpha-benzyl-gamma-butyrolactones.     

Developing a sequential injection-square wave voltammetry (SI-SWV) method for determination of atrazine using a hanging mercury drop electrode

This paper describes the development of a sequential injection analysis method to automate the determination of atrazine by square wave voltammetry exploiting the concept of monosegmented flow analysis to perform in-line sample conditioning and standard addition. To perform these tasks, an 800 μL monosegment is formed, composed by 400 μL of sample and 400 μL of buffer/standard solution. To obtain an efficient homogenization, the sample solution is divided in five zones intercalated by four zones of the Britton-Robinson buffer (pH 2.0) in presence of appropriate concentration of NaNO₃ and varying atrazine standard concentrations. This mixture zone is isolated from the carrier solution by two 100 μL air bubbles. After homogenization in an auxiliary reaction coil the mixture zone is injected toward the flow cell, which is adapted to the capillary of a hanging drop mercury electrode, at a flow rate of 50 μL s⁻¹. After a suitable delay time, the potential is scanned from −0.5 to −1.2 V versus Ag/AgCl using a frequency of 300 Hz and pulse height of 25 mV. The linear dynamic range is observed for atrazine concentrations between 1.16 × 10⁻⁷ and 2.32 × 10⁻⁶ mol L⁻¹, obeying the linear equation i_p = (−6.91 ± 0.07) × 10⁸[atrazine] + (4 ± 8), with r² = 0.9996, for which the slope is given in nA L mol⁻¹. The detection and quantification limits of the method are 2.1 × 10⁻⁸ and 7.0 × 10⁻⁸ mol L⁻¹, respectively. The sampling frequency is 37 h⁻¹, when the standard addition protocol is followed. This frequency can be increased to 42 h⁻¹ if the protocol to obtain in-line calibration curve is used for quantification. The method was applied for determination of atrazine in spiked river water samples and its accuracy was evaluated by comparison with the batch standard addition approach, which revealed that there is no evidence of statistically significant differences between the two methods.     

Electron impact mass spectrometry of some macrocyclic polyether lactones

Electron impact mass spectrometry has been used together with linked scans, exact mass measurements and mass-analysed ion kinetic energy spectrometry to study nine inacrocyclic polyether lactones in detail. The presence of abundant hydrogenated oxirane ions has been observed for all the compounds examined, and confirmed by kinetic energy release measurements.     

Synthesis, crystal structure, spectroscopic and electrochemical characterization of the dinuclear complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)-propionato-O,O′]bis(aqua)dicopper(II)}

Structural, electrochemical and spectroscopic data of a new dinuclear copper(II) complex with (±)-2-(p-methoxyphenoxy)propionic acid are reported. The complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)propionato-O,O′]-bis(aqua)dicopper(II)} crystallizes in the monoclinic system, space group P2₁/n with a = 14.149(1) ?, b = 7.495(1) ?, c = 19.827(1) ?, β = 90.62(1) and Z = 4. X-ray diffraction data show that the two copper(II) ions are held together through four carboxylate bridges, coordinated as equatorial ligands in square pyramidal geometry. The coordination sphere around each copper ion is completed by two water molecules as axial ligands. Thermogravimetric data are consistent with such results. The ligand has an “L” type shape due to the angle formed by the β-carbon of the propionic chain and the linked p-methoxyphenoxy group. This conformation contributes to the occurrence of a peculiar structure of the complex. The complex retains its dinuclear nature when dissolved in acetonitrile, but it decomposes into the corresponding mononuclear species if dissolved in ethanol, according to the EPR measurements. Further, cyclic voltammograms of the complex in acetonitrile show that the dinuclear species maintains the same structure, in agreement with the EPR data in this solvent. The voltammogram shows two irreversible reduction waves at E _pc = −0.73 and −1.04 V vs. Ag/AgCl assigned to the Cu(II)/Cu(I) and Cu(I)/Cu° redox couples, respectively, and two successive oxidation waves at E _pa =− 0.01 and +1.41 V vs. Ag/AgCl, assigned to the Cu°/Cu(I) and Cu(I)/Cu(II) redox couples, respectively, in addition to the oxidation waves of the carboxylate ligand.     

Intercalation of α,ω-alkyldiamines in layered α-zirconium phosphate and the inclusion behaviour of some of the intercalates obtained

The paper reports a study on the intercalation mechanism of NH₂(CH₂) _n NH₂ (withn=2, 4, 6, 8, 10) diamines in layered Zr(HOPO₃)₂·H₂O, performed by titrating the host with aqueous solutions of amines at 80°C. The intercalation reactions occur stepwise according to the ‘moving boundary’ model, with the formation of a number of intermediate intercalation compounds of formula Zr(HOPO₃)₂·xNH₂(CH₂) _n NH₂ (0<x<1) before obtaining the fully intercalated ones (x=1). For each diamine the batch titration curve and a diagram of the phases involved in the interaclation reaction are reported. Twenty-two intercalation compounds have been isolated and characterized by their composition, XRD patterns and thermal behaviour, and information on the disposition of the guests within the interlayer region have been derived. At full intercalation the diamines form a monolayer of extended molecules with their axis inclined at 58° to the plane of the sheet. The terminal amino groups are protonated by the —POH groups of the host, thus each diamine binds adjacent layers and, in a sense, transforms a layered structure into a framework structure that may have an accessible or potentially accessible porosity. The intercalation compound Zr(HOPO₃)₂·0.5NH₂(CH₂)₈NH₂ is indeed able to include polar molecules such as water and short chain alkanols.     

Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.