表面电沉积Ni—La2O3复合镀层的Fe26Cr1Mo不锈钢的氧化行为研究

Ｆｅ２６Ｃｒ１Ｍｏ不锈钢在９００℃氧化时，生成的氧化层在冷却过程中大量剥落，经表面共电沉积ＮｉＬａ２Ｏ３复合镀层后，抗热循环能力明显提高。     

马来酸氟伏沙明-D3的合成

以4-苄氧基-1-丁醇（2）为起始原料,氘代碘甲烷为氘代试剂,经氘代甲基化、氢化脱苄、溴化、格氏反应、戴斯-马丁氧化、缩合、取代、成盐等反应,以51.7%总收率合成了稳定同位素标记的马来酸氟伏沙明-D₃（1）。该合成方法原料易得、操作简单、重现性好。目标化合物的结构经核磁共振和高分辨质谱确认,可用于药代动力学研究     

High-performance liquid chromatographic resolution of 1-(1,4-benzodioxane-2-formyl)-piperazine enantiomers after chiral derivatization

Chiral separation of racemic mixtures is of the greatest importance to the pharmaceutical industry, as the isomers of a given racemate may exhibit substantially different pharmacological effects, not to mention possibly differing toxicity behaviour. A novel chiral separation method is developed for the determination of 1-(1,4-benzodioxane-2-formyl)piperazine (BFP) enantiomers. The indirect resolution is performed by applying precolumn derivatization with the chiral reagent 2,3,4,6-tetra-O-acetyl-beta-D-glucopyranosyl isothiocyanate (GITC). The resulting diastereoisomers are separated on a reversed-phase ODS column with methanol-potassium dihydrogen phosphate (0.02mol/L, 50:50) as mobile phase. UV detection is at 250 nm. The effect of mobile phase composition upon resolution and analysis time is investigated. Two diastereoisomers show nearly base-line separation under optimal chromatographic conditions. The presented study provides a simple and accurate method for the enantiomeric quality control and the optical purity assay of BFP.     

甲酚紫非线性光学性质的研究

报道了甲酚紫染料的非线性光学性质的实验研究方法及其结果.利用简并四波混频技术,测量得到甲酚紫甲醇溶液(浓度为5×10~(-4)M)的三阶非线性极化率X~(3)为2.0×10~(-10)esu.此外,利用不同强度皮秒脉冲相关技术得到了甲酚紫甲醇溶液的吸收恢复时间τ_(21)为163ps.     

三个矩阵秩不等式的多种证明

针对线性代数课程教学中三个矩阵秩的不等式的证明展开研究,对每一个不等式,分别给出相应的证明。     

GESFIDE-PROPELLER Approach for Simultaneous R2 and R2* Measurements in the Abdomen

Purpose

To investigate the feasibility of combining GESFIDE with PROPELLER sampling approaches for simultaneous abdominal R2 and R2* mapping.

Materials and Methods

R2 and R2* measurements were performed in 9 healthy volunteers and phantoms using the GESFIDE-PROPELLER and the conventional Cartesian-sampling GESFIDE approaches.

Results

Images acquired with the GESFIDE-PROPELLER sequence effectively mitigated the respiratory motion artifacts, which were clearly evident in the images acquired using the conventional GESFIDE approach. There was no significant difference between GESFIDE-PROPELLER and reference MGRE R2* measurements (p = 0.162) whereas the Cartesian-sampling based GESFIDE methods significantly overestimated R2* values compared to MGRE measurements (p < 0.001).

Conclusion

The GESFIDE-PROPELLER sequence provided high quality images and accurate abdominal R2 and R2* maps while avoiding the motion artifacts common to the conventional Cartesian-sampling GESFIDE approaches.     

Microwave-absorbing properties of NiCoZn spinel ferrites

In this paper, the microwave-absorbing properties of (Ni_1−x−yCo_xZn_y)Fe₂O₄ spinel ferrites have been investigated within the frequency range of 0.5–14 GHz. There are two kinds of resonance peaks observed in the permeability spectra: domain-wall resonances at lower frequency and spin-rotation resonances at higher frequency. The reflection loss (RL) calculations show that the prepared NiCoZn spinel ferrites are good electromagnetic (EM) wave absorbers in microwave range. In terms of the absorbing frequency band (AFB) and the matching thickness (t_m), (Ni_0.407Co_0.207Zn_0.386)Fe₂O₄ shows the best performances: t_m=3.15 mm and the AFB is 8.64–11.2 GHz. Decreasing the weight ratio of NiCoZn ferrites in ferrites/wax composites, the matching thickness decreases and the AFB shifts to higher frequencies. Compared with the absorbers with single-layer ferrites, the absorbers with double-layers ferrites have better absorbing performances, such as a thinner matching thickness and a wider EM wave AFB.