Experimental investigation on the thermophysical properties of beryllium oxide-based nanofluid and nano-enhanced phase change material

Journal of Thermal Analysis and Calorimetry - Low thermal conductivity is a primary issue in the development of efficient heat transfer fluids and materials required for the thermal management of...     

A biological process for the reclamation of flue gas desulfurization gypsum using mixed sulfate-reducing bacteria with inexpensive carbon sources

A combined chemical and biological process for the recycling of flue gas desulfurization (FGD) gypsum into calcium carbonate and elemental sulfur is demonstrated. In this process, a mixed culture of sulfate-reducing bacteria (SRB) utilizes inexpensive carbon sources, such as sewage digest or synthesis gas, to reduce FGD gypsum to hydrogen sulfide. The sulfide is then oxidized to elemental sulfur via reaction with ferric sulfate, and accumulating calcium ions are precipitated as calcium carbonate using carbon dioxide. Employing anaerobically digested municipal sewage sludge (AD-MSS) medium as a carbon source, SRBs in serum bottles demonstrated an FGD gypsum reduction rate of 8 mg/L/h (10⁹ cells)^-1. A chemostat with continuous addition of both AD-MSS media and gypsum exhibited sulfate reduction rates as high as 1.3 kg FGD gypsum/m³d. The increased biocatalyst density afforded by cell immobilization in a columnar reactor allowed a productivity of 152 mg SO₄ ^-2/Lh or 6.6 kg FGD gypsum/m³d. Both reactors demonstrated 100% conversion of sulfate, with 75–100% recovery of elemental sulfur and chemical oxygen demand utilization as high as 70%. Calcium carbonate was recovered from the reactor effluent on precipitation using carbon dioxide. It was demonstrated that SRBs may also use synthesis gas (CO, H₂, and CO₂ in the reduction of gypsum, further decreasing process costs. The formation of two marketable products—elemental sulfur and calcium carbonate—from FGD gypsum sludge, combined with the use of a low-cost carbon source and further improvements in reactor design, promises to offer an attractive alternative to the landfilling of FGD gypsum.

     

Chemometric and trend analysis of water quality of the South Chennai lakes: an integrated environmental study

In order to bring out the nature of the factors influencing lake water composition, multivariate statistical analysis and trend analysis were performed based on the hydrochemical data of the study area, namely, South Chennai. Change in land use pattern and settlements along the banks of the lakes alters the quality and quantity of the surface water. In the present study, the R‐mode factor analysis and cluster analysis were applied to the geochemical parameters of the water to identify the factors affecting the chemical composition of the lake water. Dendograms of both the seasons give three major clusters, reflecting the groups of unpolluted to moderately polluted, polluted, and heavily polluted stations. The movement of stations from one cluster to another clearly brings out the seasonal variation in the chemical composition of the lake water. The complex hydrochemical data of the surface water were interpreted by condensing them into three major factors. Factor score analysis was used successfully to delineate the stations under study and the role of the contributing factors, and the nature of factors responsible for the variation in chemical composition of the water has been clearly brought out. Results of trend analysis using ArcGIS clearly indicate that the trend in water quality is deteriorating at a faster rate in the eastern part of the study area. It is understood that although natural shifts probably can account for some of the variation, it is most likely that human activities play a major role in affecting the water quality on a regional scale. Copyright © 2014 John Wiley & Sons, Ltd.     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.     

SYNTHESIS,NMR AND MOLECULAR MODELING STUDY OF 4,9a-DIARYL-9,9a-DIHYDRO 1H-[1,4]THIAZINO[4,3-a][1,3]BENZIMIDAZOLES

A series of substituted 4,9a-diaryl-9,9a-dihydro-1H-[1,4]thiazino[4,3-a][1,3]benzimidazoles was prepared in good yields from the reaction of bis(aroylmethyl) sulfides with ortho-phenylenediamine in glacial acetic acid under reflux and under microwave irradiation. Microwave irradiation is found to accelerate the reaction, besides giving better yield in the case of the thiazinobenzimidazoles with electron-withdrawing groups in the aryl rings than the thermal reaction.