Synthesis and spectral studies of platinum complexes with amide-group containing ligands

Summary Complexes of platinum(II) with 2-(acetylamino)benzoic acid, 2-(benzoylamino)benzoic acid, maleanilic acid, malea-1-naphthanilic acid, 2-(phenylamino)benzoic acid, 2-[(2-aminophenylamino)carbonyl]benzoic acid, 2-(aminobenzoyl)benzoic acid, 2-[1-naphthalenylamino)-carbonyl]benzoic acid, 2-(2-aminobenzoylamino)-benzoic acid have been prepared and characterized by elemental analysis, molar conductivity measurements, thermal data and i.r., electronic and n.m.r. spectra.     

Catalytic behavior of decomposed molybdophosphoric acid supported on alumina for oxidative dehydrogenation of ethane to ethylene

Oxidative dehydrogenation of ethane (ODHE) to ethylene was investigated over a series of alumina supported molybdophosphoric acid (MPA) catalysts. The MPA was transformed into surface Mo oxides on Al₂O₃ when subjected to calcination at 600°C. The catalysts were characterized by N₂-adsorption, XRD, FT-IR spectroscopy and TPR techniques. The results showed that MPA loading and the source of Mo precursor had a clear influence on the catalytic performance. The evaluation of the catalysts for ODHE at temperatures between 450 and 550°C revealed superior ethane conversion (X～24%) and ethylene selectivity (S = ca. 65%) over 20 wt % MPA/Al₂O₃ catalyst. The transformation of MPA into finely dispersed Mo oxides on Al₂O₃ appeared to be responsible for this improved performance.     

Identification and characterization of impurities in an insecticide,bifenthrin technical

The HPLC‐DAD and GC/MS methods were successfully used for the identification and characterization of the impurities in an agrochemical insecticide, bifenthrin technical. Three impurities ranging from 0.175%–0.541% were detected by the HPLC‐DAD method. The LC/MS technique with ESI or APCI source failed to detect the impurities detected by HPLC‐DAD, due to lack of ionization in ESI or APCI. The three impurities were enriched by prep‐HPLC, and then their structures were elucidated based on the GC/EIMS and CIMS data. The EI mass spectra of bifenthrin and its impurities displayed molecular ion and provided structure indicative fragment ions; the CIMS data further confirmed their molecular weight. The identity of the impurity 1 was further confirmed by the synthesis of the authentic sample followed by NMR and GC/MS data.     

Three-dimensional photoelastic study of the load-carrying capacity/face width ratio of Wildhaber-Novikov gears for automotive applications

Wildhaber-Novikov gears are becoming more and more popular for heavy load applications. They have been tried as speed-reducing gears, in spite of heavy noise generation, in aircraft jet engines, marine engines and agricultural machinery. These circular-arc gears, though stronger than involute geras, have the disadvantage of needing larger face width. Axial face width required can be minimized only at the expense of load-carrying capacity. This is not a serious disadvantage with stationary engines. But in the case of automotive applications, this fact limits the load-carrying capacity of Wildhaber-Novikov gears, since space problem is very critical in these applications and large face widths, therefore, cannot be used for such gear-reduction units. The face width is determined by the helix angle and, therefore, a thorough investigation of the dependence of the load-carrying capacity on helix angle is necessary, if these special types of gears have to make headway into the automotive field. In this experimental investigation, three-dimensional photoelastic technique has been employed to study the load-carrying capacity/face width ratio. Three-dimensional gear models made of epoxy castings (Araldite B) were loaded in a specially built gear-loading fixture and were stress frozen. Gear cutters of Wildhaber-Novikov gears developed at the laboratory were used for the preparation of these three-dimensional gear models. The stress-frozen models were analyzed using the conventional slicing technique to study the contact and bending-stress distribution along the face width. The load-carrying capacity in terms of contact stress and bending stress has been studied for different face widths and helix angles. Twenty-deg pressure angle, 14-mm module gears of alladdendum type of Wildhaber-Novikov gears with different helix angles up to 40 deg were tested. The helical-overlap ratio used was 1.0. The conventional profile parameters were employed for the manufacture of gear cutters of end-mill type. The decrease in contact and bending strength with increase in the helix angle or decrease in the face width, as obtained from this photoelastic method of stress analysis has been compared with existing theoretical results.     

A Stereoselective Total Synthesis of Xyolide,a Natural Bioactive Nonenolide

A stereoselective total synthesis of xyolide, a naturally occurring bioactive nonenolide, has been accomplished. The acid fragment of the molecule has been prepared from D ‐mannitol and the alcohol fragment from (2Z)‐but‐2‐ene‐1,4‐diol. The synthesis involves the coupling of these two fragments using the Yamaguchi esterification protocol, followed by intramolecular ring‐closing methathesis. The diastereoisomeric alcohol fragment has also been utilized in this synthesis by employing the Mitsunobu esterification.     

Synthesis and antiviral activity of novel imidazo[2,1-b]thiazoles coupled with morpholine and thiomorpholines

Herein described the synthesis and antiviral evaluation of a novel series of morpholine and thio-morpholine coupled imidazo[2,1-b]thiazoles. The three-step reaction sequence involving the condensation of 1,3-dichloroacetone with thiourea followed by coupling with morpholine and thiomorpholine and finally cyclization with substituted α-bromoacetophenones yielded the desired imidazothiazoles 7(a–l) . Screening of all the new compounds for their in vitro antiviral activity against influenza virus A/Puerto Rico/8/34 (H1N1) in MDCK cells, resulted in two potent analogs, 7d (IC₅₀: 1.1 μM, C₅₀: >300 μM, SI = 273) and 7e (IC₅₀: 2.0 μM, C₅₀: >300 μM, SI = 150), with a favorable toxicity profile and are the best anti-influenza hit analogs for further structural optimization.     

A practical synthesis of 5‐(4′‐methylbiphenyl‐2‐yl)‐1H‐tetrazole

Practical synthesis of 5‐(4′‐methylbiphenyl‐2‐yl)‐1H‐tetrazole, key intermediate in several angiotensin II receptor antagonists from 2‐fluorobenzonitrile in excellent yields and very high purity is described.     

Structural studies of metal complexes containing amide ligands

Complexes of Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Pd(II) with di-N-phenyl pyromellitic diimide (PhPMDI) and di-N-pyridyl pyromellitic diimide (PyPMDI) were prepared and characterized based on analytical, molar conductance, magnetic, IR, PMR, electronic and ESR data. Based on analytical and molar conductance, the complexes have been formulated as [M(PhPMDA)(H₂O)₂]_n (M = Mn, Fe, Co, Ni), [Cu(PhPMDA)]_n [Pd₂(PhPMDA)Cl₂(H₂O)₂], [M(PyPMDA)]_n (M = Mn, Fe, Co, Ni and Cu) and [Pd₂(PyPMDA)Cl₂] In all these complexes PhPMDA acts as a mononegative bidentate ligand whereas PyPMDA acts as a mononegative tridentate one in the form of amide rather than imide. The geometries of the complexes have been proposed based on the electronic spectra. The various bonding parameters have been calculated from the ESR spectra of Cu(II) complexes.     

Hydrodechlorination of chlorobenzene over supported metal catalysts

The use of supported Pd catalysts, with low and high metal content, for the hydrodechlorination of chlorobenzene is presented in this article. Application of microwave irradiation during preparation of catalysts resulted in the synthesis of large Pd particles at moderate temperatures. The nature of the support played a key role in the formation of cationic Pd species. The extent of interaction of the Pd species with the support, the nature of metal precursor, particularly the residual chlorine on the surface were found to significantly affect the activity of the catalysts. In the case of bimetallic catalysts also microwave heating resulted in creation of bigger particles of Pd compared to those observed in conventionally heated catalysts. Besides, it minimized alloy formation as a result of which the activity of the catalysts in hydrodechlorination was found to be higher compared to that observed on conventionally prepared catalysts. Contrary to the general observation that low dispersed Pd catalysts are preferable for high stability, by means of the deposition-precipitation method adopted for catalyst preparation it was demonstrated that even highly dispersed (low Pd containing) catalysts can exhibit comparable activity and stability. An analysis of the nature of Pd species and its role in the stability of the catalysts is presented.IICT communication No. 051224     

Lewis acid-assisted olefin cross-metathesis reaction: an efficient approach for the synthesis of glycosidic-pyrroloquinolinone based novel building blocks of camptothecin and evaluation of their antitumor activity

A series of glycosidic-pyrroloquinolinone based novel building blocks of camptothecin (2a–g) were synthesized via Lewis acid-assisted olefin cross-metathesis reaction using Ti(OⁱPr)₄ 30 mol % and 10 mol % of Grubb’s second generation catalyst with good to excellent yields. Most of these compounds exhibited significant growth inhibitory effects on all the tested cancer cell lines and three compounds (2c, 2d and 2e) showed potent cytotoxic activity.