Two Coulomb waves theory for direct excitation

A theoretical model of Dewangan, in which the total scattering wave function is approximated by a distorted wave containing two Coulomb wave functions, is discussed and its relation with the Brauner-Briggs-Klar model for ionization is examined. An important feature of the theory is that it includes a second Born amplitude naturally and in addition, contains, albeit approximately, both real and imaginary parts of all higher order Born terms. The theory is applied to study the 1s→2s excitation of hydrogen by electrons in the energy range 54.4 to 400eV. The differential and integral cross sections predicted by the theory are compared with the results of other theories and experimental data at 54.4eV and a good agreement is found.     

Selected-area growth of carbon nanotubes by the combination of focused ion beam and chemical vapor deposition techniques.

In this article, we report a technique for growing carbon nanotubes in a more controllable fashion, which enables us to synthesize nanotubes directly in various forms of designed patterns. This nanofabrication process is based on a combination of focused ion beam (FIB) and chemical vapor deposition (CVD) techniques. In this process, arrays of conductive patterns were first deposited on silicon substrates by directing a gaseous compound (C(9)H(16)Pt) via the capillary needle-sized nozzles within a FIB system. The substrates were then coated with catalyst and further modified by the FIB to localize the position of the catalyst. Finally, the growth of carbon nanotubes on the designed substrates was carried out by CVD of hydrocarbon gases. This fabrication technique has the advantage of positioning carbon nanotubes in selected locations. This may open up opportunities for the direct synthesis of carbon nanotubes onto almost any substrate material, thus allowing fabrication of carbon nanotube-based devices.     

沈阳市健康人血清中Mg、Zn、Cu、Se、Cr含量及其相关关系探讨

报告了143例沈阳市健康人血清中Mg、Zn、Cu、Se、Cr含量及Cu／Zn值，并指出健康人血清中Mg与Cu量正相关，Mg与Cr呈负相关，Mg与Cu／Zn值呈正相关.Zn与Cr呈正相关.Zn与Cu/Zn呈负相关.Cu与Cr呈负相关。Cu与Cu／Zn值呈负相关.Cr与Cu／Zn值呈负相关.     

Cyanine dyes as protectors of K562 cells from photosensitized cell damage

Several cyanine dyes were found to protect K562 leukemia cells against toxicity mediated by cis-di(4-sulfonatophenyl)diphenylporphine (TPPS2) and light. Most cyanine dyes derived from dimethylindole were better photoprotectors than cyanine dyes with other structures. This correlated with the fact that cyanine dyes derived from dimethylindole were predominately monomeric at millimolar concentrations within K562 cells, while other cyanine dyes formed aggregates. For cyanine dyes that are derived from dimethylindole and have absorption band wavelengths greater than 700 nm, fluorescence-energy transfer from TPPS2 to the cyanine dye was the most important mechanism for photoprotection. There was no spectroscopic evidence for complex formation between the cyanine dyes and TPPS2. The dimethylindole derivative, 1,1',3,3,3',3'-hexamethylindodicarbocyanine, was an excellent photoprotector, but a poor quencher of TPPS2 fluorescence and a relatively poor singlet-oxygen quencher. This cyanine dye may act by quenching excited triplet TPPS2. Singlet-oxygen quenching may contribute to the photoprotection provided by cyanine dyes not derived from dimethylindole. Differences in the subcellular distribution of the various cyanine dyes studied may have contributed to the different apparent mechanisms of photoprotection.     

A new insight into the adsorption of bovine serum albumin onto porous polyethylene membrane by zeta potential measurements, FTIR analyses, and AFM observations

The mode of adsorption of bovine serum albumin (BSA) on porous polyethylene (PE) membrane was studied as a function of time and concentration, which may contribute to the surface coverage. An improved physical model for adsorption is initiated based on the results of the adsorptional and desorptional measurements, FTIR analysis, and AFM observations as well as streaming potential measurements. The results obtained indicate that the adsorptional mode depend on both time and concentration. It is shown that a critical concentration (about 1000 ppm here) exists in the adsorptional process. Below this concentration, the adsorption seems to be conducted in a normal side-on way but time elapse gives rise to greater conformational change than concentration increase; above this concentration, the aggregation of protein molecular plays a decisive role and the adsorption is in an aggregation way, which is similar to end-on, but a relative large gap between the adsorbed molecules exists due to aggregation. This conclusion is general and can be expected to apply in other globular protein-hydrophobic porous surface systems.     

Renewable sol-gel carbon ceramic electrodes modified with a Ru-complex for the amperometric detection of l-cysteine and glutathione

A renewable three-dimensional chemically modified carbon ceramic electrode containing Ru [(tpy)(bpy)Cl] PF₆ was constructed by sol-gel technique. It exhibits an excellent electro-catalytic activity for oxidation of l-cysteine and glutathione at pH range 2-8. Cyclic voltammetry was employed to characterize the electrochemical behavior of the chemically modified electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for l-cysteine and glutathione by hydrodynamic amperometry. Optimum pH value for detection is 2 for both l-cysteine and glutathione. The catalytic rate constants for l-cysteine and glutathione were determined, which were about 2.1×10³ and 2.5×10³ M⁻¹ s⁻¹, respectively. Under the optimized condition the calibration curves are linear in the concentration range 5-685 and 5-700 μM for l-cysteine and glutathione determination, respectively. The detection limit (S/N=3) and sensitivity is 1 μM, 5 nA/μM for l-cysteine and 1 μM, 7.8 nA/μM for glutathione. The relative standard deviation (RSD) for the amperogram's currents with five injections of l-cysteine or glutathione at concentration range of linear calibration is <1.5%. The advantages of this amperometric detector are: high sensitivity, good catalytic effect, short response time (t<3 s), remarkable long-term stability, simplicity of preparation and reproducibility of surface fouling (RSD for six successive polishing is 3.31%). This sensor can be used as a chromatographic detector for analysis of l-cysteine and glutathione.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.     

Horseshoe effect and topological entropy of one-dimensional maps

Abstract. In this paper, for any continuous function