Preparation, characterization and thermolysis of metal nitrate complexes with 4,4’-bipyridine

Two bis(bipyridine) polymeric metal nitrate complexes with 4,4’-bipyridine of simple formula like [M(bipy)₂](NO₃)2⋅xH₂O (where M=Co, Ni and Cu; x=4, 2 and 0, respectively) have been prepared and characterized. Their thermal decomposition has been undertaken using simultaneous TG-DTG-DTA and DSC in nitrogen atmosphere and non-isothermal TG in air atmosphere. Isothermal TG has been performed at decomposition temperature range of the complexes to evaluate the kinetics of decomposition by applying model-fitting as well as isoconversional method. Possible mechanistic pathways have also been proposed for the thermolysis. Ignition delay measurements have been carried out to investigate the response of these complexes under the condition of rapid heating.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.     

Coherence during scattering of fast H atoms from a LiF(001) surface

The coherence for diffraction effects during grazing scattering of fast hydrogen and helium atoms from a LiF(001) surface with energies up to some keV is investigated via the coincident detection of two-dimensional angular distributions for scattered projectiles with their energy loss. For keV H atoms, we identify electronic excitations of the target surface as the dominant mechanism for decoherence, whereas for He atoms this contribution is small. The suppression of electronic excitations owing to the band gap of insulators plays an essential role for preserving quantum coherence and thus for the application of fast atom diffraction as a surface analytical tool.     

直接键连原子间的NMR偶合常数的自然杂化轨道研究V.~(13)C-~(13)C和~(13)C-~(31)P核自旋偶合常数~1J_(CC)和~1J_(CP)

在前文工作的基础上，结合ＭＮＤＯ／ＥＨＭＯ分子轨道方法和自然杂化轨道方法，具体计算了ＣＣ键和ＣＰ键的核自旋偶合常数．计算结果表明，１ＪＣＣ和１ＪＣＰ主要由成键原子的轨道杂化作用和键极性这两种结构因素所决定．为从简单价键理论角度解释和计算１ＪＣＣ和１ＪＣＰ值提供了简便直观的方法．     

Azide telechelics chain extended by click reaction: Synthesis,characterization, and cross‐linking

Azide telechelics of poly(dimethylsiloxane) (PDMS), polypropylene oxide (PPO), and polyethylene oxide (PEO) were synthesized from the corresponding epoxy telechelics and characterized. These oligomeric azides were chain extended by reaction with bispropargyl ether of bisphenol A (BPEBA) through a copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction. PDMS manifested a faster reaction in contrast to PPO or PEO. The chain‐extended polymers underwent cross‐linking above 170°C through thermal cleavage of residual (terminal) azide groups. This was manifested in their rheograms and was further substantiated by FTIR and NMR spectroscopic analyses. Dynamic mechanical analyses of the cross‐linked polymers exhibited characteristic transitions of hard and soft segments, implying microphase separation in the system. Microscopic evaluation of the thermally cross‐linked sample revealed a porous morphology with microsized to nanosized pores.     

Molecular Design Strategy for Orange Red Thermally Activated Delayed Fluorescence Emitters in Organic Light-Emitting Diodes (OLEDs)

Pure organic molecules based thermally activated delayed fluorescence (TADF) emitters have been successfully developed in recent years for their propitious application in highly efficient organic light emitting diodes (OLEDs). In the case of orange red emitters, the non-radiative process is known to be a serious issue due to its lower lying singlet energy level. However, recent studies indicate that there are tremendous efforts put to develop efficient orange red TADF emitters. In addition, the external quantum efficiency (EQE) of heteroaromatic based orange red TADF OLEDs surpassed 30 %. Such heteroaromatic type emitters showed wide emission spectra; therefore, more attention is being paid to develop highly efficient orange red TADF emitters along with good color purity. Herein, the recent progress of orange red TADF emitters based on molecular structures, such as cyanobenzene, heteroaromatic, naphthalimide, and boron-based acceptors, are reviewed. Further, our insight on these acceptors has been provided by their photophysical studies and device performances. Future perspectives of orange red TADF emitters for real practical applications are discussed.     

Self-assembly of class II hydrophobins on polar surfaces

Hydrophobins are structural proteins produced by filamentous fungi that are amphiphilic and function through self-assembling into structures such as membranes. They have diverse roles in the growth and development of fungi, for example in adhesion to substrates, for reducing surface tension to allow aerial growth, in forming protective coatings on spores and other structures. Hydrophobin membranes at the air-water interface and on hydrophobic solids are well studied, but understanding how hydrophobins can bind to a polar surface to make it more hydrophobic has remained unresolved. Here we have studied different class II hydrophobins for their ability to bind to polar surfaces that were immersed in buffer solution. We show here that the binding under some conditions results in a significant increase of water contact angle (WCA) on some surfaces. The highest contact angles were obtained on cationic surfaces where the hydrophobin HFBI has an average WCA of 62.6° at pH 9.0, HFBII an average of 69.0° at pH 8.0, and HFBIII had an average WCA of 61.9° at pH 8.0. The binding of the hydrophobins to the positively charged surface was shown to depend on both pH and ionic strength. The results are significant for understanding the mechanism for formation of structures such as the surface of mycelia or fungal spore coatings as well as for possible technical applications.     

Following the evolution of morphology, composition and crystallography of alumina based catalysts after laser ablation: Implications for analysis by LA-ICP-AES

Fundamental understanding of aerosol formation during laser ablation is important for the development of LA-ICP analysis of complex samples. Using a Lina Spark Atomizer™, the application of this technique to the field of heterogeneous catalysis gave an accuracy of 5–15% while extreme values of +100% could be obtained in some cases. To improve understanding of laser ablation processes, particles generated during ablation of alumina based catalysts were collected and analysed using different microscopy and surface analysis techniques. Morphological study by scanning electron microscopy showed that most of the particles leaving the ablation cell were nanoparticle aggregates generated from vapor condensation. An XRD study of these aerosols revealed that the condensation converge on the formation of a spinel structure with large coherence domains. Elemental composition of the aerosol was also followed and exhibited differences between a catalyst containing large Mo concentration or low Pt concentration.