Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Elimination of methane from protonated acetaldehyde: The Ab initio transition state

The transition state (TS) for loss of CH₄ from protonated acetaldehyde has been located at the second-order Moller-Plesset (MP2)/6-31G(d,p) level of theory. The activation energy is predicted to be 263.9 kJ/mol starting from the more stable form (methyl and hydrogen E) and 261.6 kJ/mol starting from the less stable form (methyl and hydrogen Z) that is required for reaction. The products (methane and the formyl ion) are predicted to lie 136.6 kJ/mol below the TS for their formation. MP2 methods underestimate the heats of formation of both the TS and the reaction products by about 40 kJ/mol when compared with experiment. Restricted Hartree-Fock (RHF) calculations give much more accurate relative energies. The MP2 TS leads directly to fragmentation and is described as a protonation of the methyl group by the acidic proton on oxygen. Under RHF theory the reaction is stepwise. An RHF TS similar to the MP2 TS leads to a nonclassical intermediate (which is stable at this level of theory) that has one of the C---H bonds protonated. This mechanism (protonation of an alkyl group) appears to be a general one for high energy 1,2 eliminations from organic cations. (J Am Soc Mass Spectrom 1994, 5, 1102-1106)     

Optimization of solid-phase clean-up prior to liquid chromatographic analysis of ochratoxin A in roasted coffee

An extraction and clean-up method for ochratoxin A (OA) in roasted coffee has been developed and the HPLC method optimized. An interfering compound with a similar retention time as OA was adsorbed by the aminopropyl (NH2) material at < or = 5% NaHCO3. Residual OA on the column was recovered by washing with the extraction solution followed with methanol. Fractions were mixed together for further clean-up with Ochratest immunoaffinity columns (IACs). Analysis by HPLC resulted in a well resolved OA peak and reduction in matrix interferences. Recoveries ranged from 72 to 84% and the detection limit was 1 ng/g.     

Fast Dimension Reduction Using Rademacher Series on Dual BCH Codes

The Fast Johnson–Lindenstrauss Transform (FJLT) was recently discovered by Ailon and Chazelle as a novel technique for performing fast dimension reduction with small distortion from ℓ ₂ ^d to ℓ ₂ ^k in time O(max {dlog d,k ³}). For k in [Ω(log d),O(d ^1/2)], this beats time O(dk) achieved by naive multiplication by random dense matrices, an approach followed by several authors as a variant of the seminal result by Johnson and Lindenstrauss (JL) from the mid 1980s. In this work we show how to significantly improve the running time to O(dlog k) for k=O(d ^1/2−δ ), for any arbitrary small fixed δ. This beats the better of FJLT and JL. Our analysis uses a powerful measure concentration bound due to Talagrand applied to Rademacher series in Banach spaces (sums of vectors in Banach spaces with random signs). The set of vectors used is a real embedding of dual BCH code vectors over GF(2). We also discuss the number of random bits used and reduction to ℓ ₁ space. The connection between geometry and discrete coding theory discussed here is interesting in its own right and may be useful in other algorithmic applications as well.     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Magnetization curves for general cylindrical samples in a transverse field

Using the recent results for the surface current density on cylindrical surfaces of arbitrary cross-section producing uniform interior magnetic field we propose a method for obtaining solutions of Bean’s critical state model for general cylindrical samples. The method uses the technique of conformal mapping to express the sample surface and the flux-fronts in terms of a set of coefficients that depend on a parameter. The flux-fronts are to be determined by solving a system of nonlinear ordinary differential equations for the coefficients. Retaining only a certain finite number of leading coefficients we get an approximate solution. The procedure is illustrated by considering two cyclindrical samples — one with an elliptical cross-section and the other with a non-elliptical cross-section. The virgin curve and small and large magnetization hysteresis loops for the two samples are obtained.     

Low-field vortex dynamics in various high-T c thin films

We present a novel ac susceptibility technique for the study of vortex creep in superconducting thin films. With this technique we study the dynamics of dilute vortices in c-axis oriented Y-123, Hg-1212, and Tl-1212 thin films, as well as a axis oriented Hg-1212 thin films. Results on the Hg-1212 and Tl-1212 thin films indicate that dislocation-mediated plastic flux creep of single vortices dominates at low temperatures and fields. As the temperature (or the field) is increased, the increasing vortex-vortex interactions promote a collective behavior, which can be characterized by elastic creep with a non-zero μ exponent. Also, in some of these samples effects of thermally assisted quantum creep are visible up to 45 K in some of these samples. In Y-123 thin films, creep is found to be collective down to the lowest temperatures and fields investigated, while the quantum creep persists only up to 10–11 K.     

Development of a colloidal gold-based lateral-flow immunoassay for the rapid simultaneous detection of zearalenone and deoxynivalenol

A multianalyte lateral-flow technique using colloidal gold-labeled monoclonal antibodies was developed for the rapid simultaneous detection of deoxynivalenol (DON) and zearalenone (ZEA). The results of this qualitative one-step test were interpreted visually. A very simple and fast sample preparation was used, and the assay procedure could be accomplished within 10 min. When applied to spiked wheat samples, the technique gave accurate and reproducible results. Cut-off levels of 1500 and 100 μg kg⁻¹ for DON and ZEA, respectively, were observed. The described multianalyte format can be used as a reliable, rapid and cost-effective on-site screening technique for the simultaneous determination of mycotoxins in grain samples.     

Dense Fast Random Projections and Lean Walsh Transforms

Random projection methods give distributions over k×d matrices such that if a matrix Ψ (chosen according to the distribution) is applied to a finite set of vectors x _i ∈ℝ ^d the resulting vectors Ψx _i ∈ℝ ^k approximately preserve the original metric with constant probability. First, we show that any matrix (composed with a random ±1 diagonal matrix) is a good random projector for a subset of vectors in ℝ ^d . Second, we describe a family of tensor product matrices which we term Lean Walsh. We show that using Lean Walsh matrices as random projections outperforms, in terms of running time, the best known current result (due to Matousek) under comparable assumptions.     

Lateral-flow colloidal gold-based immunoassay for the rapid detection of deoxynivalenol with two indicator ranges

A lateral-flow immunoassay using a colloidal gold-labelled monoclonal antibody was developed for the rapid detection of deoxynivalenol (DON). Different parameters, such as the amount of immunoreagents, type of the materials, composition of the blocking solution and of the detector reagent mixture, were investigated to provide the optimum assay performance. The experimental results demonstrated that such a visual test had an indicator range rather than a cut-off value. Thus, tests for DON determination with two different indicator ranges of 250-500 and 1000-2000 μg kg⁻¹ were designed. The method allowed detection of DON at low and high concentration levels, which could be useful for research and practical purposes. The assay applied to spiked wheat and pig feed samples demonstrated accurate and reproducible results. The applicability of the developed lateral-flow test was also confirmed under real field conditions. The test strips prepared in Belgium were sent to Mexico, where they were used for the screening of DON contamination in different bread wheat entries from Fusarium Head Blight inoculated plots. The results were compared with those obtained by ELISA and LC-MS/MS. A poor correlation between ELISA and LC-MS/MS was observed. Visual results of the dipstick tests were in a good agreement with the results of the LC-MS/MS method. Coupled with a simple and fast sample preparation, this qualitative one-step test based on the visual evaluation of results did not require any equipment. Results could be obtained within 10 min. The described assay format can be used as a simple, rapid, cost-effective and robust on-site screening tool for mycotoxin contamination in different agricultural commodities.