Microalgae separation by inertia-enhanced pinched flow fractionation

To improve the accuracy and efficiency of ships’ ballast water detection, the separation of microalgae according to size is significant. In this article, a method to separate microalgae based on inertia-enhanced pinched flow fractionation (iPFF) was reported. The method utilized the inertial lift force induced by flow to separate microalgae according to size continuously. The experimental results show that, as the Reynolds number increases, the separation effect becomes better at first, but then stays unchanged. The best separation effect can be obtained when the Reynolds number is 12.3. In addition, with the increase of the flow rate ratio between sheath fluid and microalgae mixture, the separation effect becomes better and the best separation effect can be obtained when the flow rate ratio reaches 10. In this case, the recovery rate of Tetraselmis sp. is about 90%, and the purity is about 86%; the recovery rate of Chlorella sp. is as high as 99%, and the purity is about 99%. After that, the separation effect keeps getting better but very slowly. In general, this study provides a simple method for the separation of microalgae with different sizes, and lays a foundation for the accurate detection of microalgae in the ballast water.     

On the Local Regularity of Solutions for Double Degenerate Nonlinear Parabolic Equations (uq-1)t=div(|ΔU|p-2ΔU) When 1

In this paper, we establish interior Hölder estimates of solutions for double degenerate nonlinear parabolic equations (u^{q-1})_t = div (|∇u|^{p-2}∇u) when 1 < p < 2, p ≤ q.     

Magnetite nanoparticles/chiral nematic liquid crystal composites with magnetically addressable and magnetically erasable characteristics

A magnetite (Fe₃O₄) nanoparticle/chiral nematic liquid crystal (N*-LC) composite was prepared and filled into a planar treated cell. The Fe₃O₄ nanoparticles had been modified by oleic acid so that they could be better dispersed in the composite. When a magnetic field was scanned on the outer surface of the cell locally, Fe₃O₄ nanoparticles moved towards the inner surface of the cell correspondingly, and the black expected information was displayed. When the magnet was applied to the opposite outer surface, the information was erased. After polymer network walls were prepared in the composite, the resolution of the information displayed increased. Then, through the formation of hydrogen bonds between the nanoparticles and chiral pyridine compound (CPC) doped in the composite, the pitch length of the N*-LC could be adjusted by altering the intensity of the applied magnetic field. The composite doped with CPC could potentially be used as a material for a type of reflective colour paper with magnetically controllable characteristics.     

Terminal sliding mode control without singular for a class of uncertain system

An improved nonsingular terminal sliding mode method is proposed for a class of nonlinear systems with unmodeled dynamics. The proposed method can effectively avoid the singularity problem. The stability of the proposed procedure which could guarantee the robustness against uncertain unmodeled dynamic and external disturbances is proven by using the Lyapunov theory in finite time. An example is given to show the proposed improved terminal sliding mode control law without singular effectively. © 2016 Wiley Periodicals, Inc. Complexity 21: 566–572, 2016     

计算流体力学中的谱方法

本文论及偏微分方程数值解中的谱方法的理论基础和数值实现．评述近年来有关谱方法的最主要的几个研究领域，着重讨论区域分解技术，不同数学模型的耦合以及不同离散方法的耦合问题，并介绍一些最新结果．     

Improving the cyclability of Li-O2 batteries with palladium nanocolloidal electrolytes

Journal of Solid State Electrochemistry - The slow decomposition kinetics of Li2O2 and the accumulation of by-products resulted in the passivation of cathode is one of the key issues restricting...     

基于空时级联滤波的拖船自噪声抵消方法

拖船自噪声属于近场多途强干扰信号,具有显著角度扩展现象,是影响拖曳阵探测性能的重要因素之一。在逆波束形成自噪声抵消方法基础上,结合空域和时域滤波,提出了空时级联滤波的拖船自噪声抵消方法。首先,由方位估计器估计拖船自噪声方位,经过波束形成空域滤波估计得到自噪声信号;然后,利用自噪声空域滤波输出设计最优维纳滤波器,将自噪声抵消在阵元级。基于简正波声场模型的仿真和实际海试数据的处理表明,该方法能够有效抵消拖船自噪声,性能优于逆波束形成方法。     

Initial-boundary-value Problem for a Degenerate Quasilinear Parabolic Equation of Order 2m

In this paper we consider the initial-boundary value problem for the higher-order degenerate quasilinear parabolic equation \frac{∂u(x, t)}{∂t} + Σ_{|α|≤M}(-1)^{|α|}D^αA_α(x, t, δu, D^mu) = 0 Under some structural conditions for A_α(x, t, δu, D^mu), existence and uniqueness theorem are proved by applying variational operator theory and Galërkin method.     

Automated numerical simulation of the propagation of multiple cracks in a finite plane using the distributed dislocation method

In this paper, an automated numerical simulation of the propagation of multiple cracks in a finite elastic plane by the distributed dislocation method is developed. Firstly, a solution to the problem of a two-dimensional finite elastic plane containing multiple straight cracks and kinked cracks is presented. A serial of distributed dislocations in an infinite plane are used to model all the cracks and the boundary of the finite plane. The mixed-mode stress intensity factors of all the cracks can be calculated by solving a system of singular integral equations with the Gauss–Chebyshev quadrature method. Based on the solution, the propagation of multiple cracks is modeled according to the maximum circumferential stress criterion and Paris' law. Several numerical examples are presented to show the accuracy and efficiency of this method for the simulation of multiple cracks in a 2D finite plane.