Fourier transform spectroscopy of CH3OH: rotation-torsion-vibration structure for the CH3-rocking and OH-bending modes

High-resolution Fourier transform spectra of CH₃OH have been investigated in the infrared region from 930 to 1450 cm⁻¹ in order to map the torsion-rotation energy manifolds associated with the ν₇ in-plane CH₃ rock, the ν₁₁ out-of-plane CH₃ rock, and the ν₆ OH bend. Upper-state term values have been determined from the assigned spectral subbands, and have been fitted to power-series expansions to obtain substate origins and effective B-values for the three modes. The substate origins have been grouped into related families according to systematic trends observed in the torsion-vibration energy map, but there are substantial differences from the traditional torsional patterns. There appears to be significant torsion-mediated spectral mixing, and a variety of “forbidden” torsional combination subbands with |Δυ_t|>1 have been observed, where υ_t denotes the torsional quantum number (equivalent to υ₁₂). For example, coupling of the (υ₆,υ_t)=(1,0) OH bend to nearby torsionally excited (υ₇,υ_t)=(1,1) CH₃-rock and (υ₈,υ_t)=(1,1) CO-stretch states introduces (υ₆,υ_t)=(1,0)←(0,1) subbands into the spectrum and makes the ν₇+ν₁₂−ν₁₂ torsional hot band stronger than the ν₇ fundamental. The results suggest a picture of strong coupling among the OH-bending, CH₃-rocking, and CO-stretching modes that significantly modifies the traditional energy structure and raises interesting and provocative questions about the torsion-vibration identity of a number of the observed states.     

Rotational spectra, conformational structures, and dipole moments of thiodiglycol by jet-cooled FTMW and ab initio calculations

The rotational spectra of three low-energy conformers of thiodiglycol (TDG) (HOCH₂CH₂SCH₂CH₂OH) have been measured in a molecular beam using a pulsed-nozzle Fourier-transform microwave spectrometer. To determine the likely conformational structures with ab initio approach, conformational structures of 2-(ethylthio)ethanol (HOEES) (CH₃CH₂SCH₂CH₂OH) were used as starting points together with the consideration of possible intramolecular hydrogen bonding in TDG. Three lower-energy conformers have been found for TDG at the MP2=Full/6311G** level and ab initio results agree nicely with experimentally determined rotational constants. In addition, Stark measurements were performed for two of the three conformers for dipole moment determinations, adding to our confidence of the conformational structure matches between experimental observations and ab initio calculations. Of the three lower-energy conformers, one displays a compact folded-like structure with strong hydrogen bonding between the two hydroxyl groups and the central sulfide atom. Two other conformers have relatively open chain-like structures with hydrogen bonding between each of the hydroxyl groups to the central sulfur atom, of which one has pure b-type dipole moment according to the ab initio results.     

KxCoO2·yH2O(x《0.2,y≤0.8)的晶体结构、输运及磁学性质

利用熔融KOH和Co3O4在较低温度(480℃)下反应制备出K0.36CoO2,然后用高锰酸钾溶液和饱和的过硫酸钾溶液进行氧化处理.氧化的同时伴随有水分子嵌入.K0.36CoO2用高锰酸钾和过硫酸钾溶液处理后分别得到K0.12CoO2·0.8H2O和K0.16CO2·0.6H2O.这两种化合物都属于六角晶系,表现出金属行为,脱水后主相变为正交结构并且呈现出半导体特性.K0.16CoO2·0.6H2O在56K附近可能存在自旋玻璃转变行为或其他涨落.随着钾含量的减少和水含量的增多,样品的自旋玻璃行为受到抑制或发生磁性相分离.样品K0.12CoO2·0.8H2O在零场冷却和有场冷却曲线上的分叉现象基本上消失.还讨论了产生KxCoO2与NaxCoO2体系结构和物性差别的原因.     

球形钴酸锂的乳液法合成及其结构、性能研究

采用一种特殊乳液法, 制备了锂离子电池正极材料球形LiCoO₂. 分别研究了一次颗粒尺寸、烧结时间对于二次造粒的影响. 还对LiCoO₂球体内部的结构进行了SEM和HRTEM研究, 发现一次颗粒非常紧密地融合在一起, 晶体边界区域没有明显的非晶相区, 也没有纳米级别的孔洞、裂缝. 电化学性能研究表明, 在900 ℃烧结4 h的材料具有较高的首次放电容量(143 mAh•g^－1)和良好的循环性能     

ErCl3-CdCl2-HCl-H2O的相平衡(25 ℃)及其固相化合物*

测定了四元体系ErCl3-CdCl2-HCl-H2O(298.15K)的相平衡溶度数据, 绘制了相应的溶度图. 该四元体系是由4 个固相区CdCl2·H2O(原始盐)、9CdCl2·2ErCl3·29H2O、CdCl2·7ErCl3·42H2O、ErCl3·6H2O(原始盐)组成的复杂 体系. 对两个新物相化合物9CdCl2·2ErCl3·29H2O 和CdCl2·7ErCl3·42H2O 进行了XRD、TG-DTG 和荧光光谱研究.结果表明, 两个新物相化合物均具有荧光和上转换发光性能; 化合物9CdCl2·2ErCl3·29H2O通过3 步失去其结晶水, CdCl2·7ErCl3·42H2O 则1 步失去其结晶水.     

Ion pair assisted micro matrix solid phase dispersion extraction of alkaloids from medical plant

A novel micro matrix solid phase dispersion method was successfully used for the extraction of quaternary alkaloids in Phellodendri chinensis cortex. The elution of target compounds was accomplished with sodium hexanesulfonate as the eluent solvent. A neutral ion pair was formed between ion-pairing reagent and positively charged alkaloids in this process, which was beneficial for selectively extraction of polar alkaloids. Several parameters were optimized and the optimal conditions were listed as follows: silica gel as the sorbent, silica to sample mass ratio of 1:1, the grinding time of 1 min. The exhaustive elution of targets was achieved by 200 µL methanol/water (9:1) containing 150 mM sodium hexane sulfonate at pH 4.5. The method validation covered linearity, recovery, precision of intraday and interday, limits of detection, limits of quantitation, and repeatability. This established method was rapid, simple, environmentally friendly, and highly sensitive.     

First-principles study of structural stability and elastic property of pre-perovskite PbTiO3

The structural stability and the elastic properties of a novel structure of lead titanate,which is named preperovskite PbTiO₃ （PP-PTO） and is constructed with TiO₆ octahedral columns arranged in a one-dimensional manner,are investigated by using first-principles calculations.PP-PTO is energetically unstable compared with conventional perovskite phases,however it is mechanically stable.The equilibrium transition pressures for changing from preperovskite to cubic and tetragonal phases are 0.5 GPa and 1.4 GPa,respectively,with first-order characteristics.Further,the differences in elastic properties between pre-perovskite and conventional perovskite phases are discussed for the covalent bonding network,which shows a highly anisotropic character in PP-PTO.This study provides a crucial insight into the structural stabilities of PP-PTO and conventional perovskite.     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

Oxidation of Benzoins to Benzils with Chromium Trioxide Under Viscous Conditions

Reaction of chiral allylic cyclic carbonates with Grignards reagent in the presence of NiCl₂(dppe) as a catalyst afforded the alkylated (E)-allylic alcohols with high regio- and diastereoselectivity.     

2-巯基苯并噻唑对铜缓蚀行为的表面增强红外光谱研究

2-巯基苯并噻唑(MBT)是Cu的高效缓蚀剂,但是缓蚀机理存在较大争议.本文通过电化学极化曲线从宏观角度对缓蚀效率进行评估,并利用原位衰减全反射-表面增强红外光谱技术结合理论计算研究了电位控制下的微观吸附构型.结果表明:在较高电位(大于0 V,相对饱和甘汞电极(SCE))下,MBT和金属Cu之间发生电子转移,MBT以硫醇式的环外S和N与金属Cu(I)离子配位在表面形成聚合物膜;在较低电位(小于0 V,vs SCE)下,MBT通过环外S原子以硫醇离子形式在金属Cu表面直立吸附.表面膜阻止了腐蚀介质的侵蚀,起到了较好的缓蚀效果.