Thermal behavior of Ni,Co and Fe succinates embedded in silica matrix

This paper presents the thermal behavior of Co, Ni and Fe succinates obtained by sol-gel synthesis using Co(II), Ni(II) and Fe(III) nitrates, 1,4-butanediol and tetraethyl orthosilicate as reactants. The thermal analysis revealed the formation of succinates at 413–453 K and their decomposition to ferrites at 503–623 K. The rate constants for the decomposition of succinates to ferrites, calculated using the isotherms at 473, 523, 573 and 623 K, were used to determine the activation energy of each ferrite (NiFe₂O₄, Ni_0.3Co_0.7Fe₂O₄, Ni_0.7Co_0.3Fe₂O₄ and CoFe₂O₄) embedded in the silica matrix. By increasing the Ni content in the mixed Ni–Co ferrites, the activation energy decreases from 13.530 to 1.944 kJ mol^?1. The formation and decomposition of succinate precursors and the formation of silica matrix were confirmed by FT-IR spectroscopy, while the formation of CoFe₂O₄ and NiFe₂O₄ single-phases embedded in the silica matrix was confirmed by X-ray diffraction analysis. The nanocrystallites size decreases from 31.7 (CoFe₂O₄) to 18.5 nm (NiFe₂O₄). The optical band gap of mixed Co–Ni ferrites was significantly higher than that corresponding to CoFe₂O₄. The photocatalytic activity of the samples was evaluated against Rhodamine B under visible light. All the samples have photocatalytic activities, the best performance being obtained in the case of Ni_0.7Co_0.3Fe₂O₄.

     

Validation of the Tessier scheme for speciation of metals in soil using the Bland and Altman test

The Tessier extraction method was used for speciation of Cu, Pb, Zn, As, Fe and Mn in a large concentration range in contaminated soil with various mineralogical compositions. The results were compared by X-ray fluorescence spectrometry (XRF) as a reference method using the Bland and Altman test. A sum of five fractions (exchangeable, bound to carbonates, Fe-Mn oxides, organic matter and residual forms) was compared with the total content determined on solid matrix by the reference method. A good agreement between the methods in the whole concentration range was found for Cu, Zn, As, and Fe. For Mn and Pb, XRF was found suitable to verify the sequential extraction only for concentrations above 250 mg kg⁻¹. This was a consequence of a poorer reproducibility of Pb extraction using the Tessier scheme due to a great difference in the mineralogical composition and the diversity of the Pb species identified in soil. The poorer result of Mn was attributed to the spectral interference of Fe in XRF. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Application of Inductively Coupled Plasma Spectrometric Techniques and Multivariate Statistical Analysis in the Hydrogeochemical Profiling of Caves—Case Study Cloșani,Romania

The aim of the study was to develop the hydrogeochemical profiling of caves based on the elemental composition of water and silty soil samples and a multivariate statistical analysis. Major and trace elements, including rare earths, were determined in the water and soil samples. The general characteristics of water, anions content, inorganic and organic carbon fractions and nitrogen species (NO₃⁻ and NH₄⁺) were also considered. The ANOVA—principal component analysis (PCA) and two-way joining analysis were applied on samples collected from Cloșani Cave, Romania. The ANOVA-PCA revealed that the hydrogeochemical characteristics of Ca²⁺-HCO₃⁻ water facies were described by five factors, the strongest being associated with water-carbonate rock interactions and the occurrence of Ca, Mg and HCO₃⁻ (43.4%). Although organic carbon fractions have a lower influence (20.1%) than inorganic ones on water characteristics, they are involved in the chemical processes of nitrogen and of the elements involved in redox processes (Fe, Mn, Cr and Sn). The seasonal variability of water characteristics, especially during the spring, was observed. The variability of silty soil samples was described by four principal components, the strongest influence being attributed to rare earth elements (52.2%). The ANOVA-PCA provided deeper information compared to Gibbs and Piper diagrams and the correlation analysis.     

Thermal behavior of Co<Subscript>x</Subscript>Fe<Subscript>3−x</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposites obtained by a modified sol–gel method

The thermal behavior of Co_xFe_3?xO₄/SiO₂ nanocomposites obtained by direct synthesis starting from nonahydrate ferric nitrate and hexahydrate cobalt nitrate in different ratios with and without the addition of 1,4-butanediol was studied. For the synthesis of Co_xFe_3?xO₄ (x = 0.5–2.5) dispersed in the silica matrix a wide Co/Fe molar ratio was used. The decomposition processes, formation of crystalline phases, gases evolvement and mass changes during gels annealing at different temperatures were assessed by thermal analysis. The absence of succinate precursor and a low mass loss were observed in the case of the gel obtained in the absence of 1,4-butanediol. In case of gels obtained using a stoichiometric ratio of Co/Fe, no clear delimitation between Co and Fe succinates was observed, while for samples with a Fe or Co excess, the formation of the two succinates was observed. The evolution of the crystalline phase after annealing (673, 973 and 1273 K) investigated by X-ray diffraction analysis and Fourier transformed infrared spectrometry revealed that in samples with Fe excess, stoichiometric Fe/Co ratio or low Co excess, the cobalt ferrite (CoFe₂O₄) was obtained as a single phase, while in samples with higher cobalt excess, olivine (Co₂SiO₄) as a main phase, cobalt oxide and CoFe₂O₄ as secondary phases were obtained after annealing at 1273 K. The SEM images confirmed the nanoparticles embedding in the silica matrix, while the TEM and X-ray diffraction data showed that the obtained nanoparticles’ size was below 10 nm in most samples.     

Thermal behavior and effect of SiO2 and PVA-SiO2 matrix on formation of Ni–Zn ferrite nanoparticles

Journal of Thermal Analysis and Calorimetry - The paper presents the synthesis of ZnFe2O4/SiO2, NiFe2O4/SiO2, Ni0.4Zn0.6Fe2O4/SiO2 and Ni0.4Zn0.6Fe2O4/PVA-SiO2 nanocomposites by a modified...     

Quality and Human Health Risk Assessment of Metals and Nitrogen Compounds in Drinking Water from an Urban Area Near a Former Non-Ferrous Ore Smelter

The quality and potential health risk of drinking waters in Medias, a town near a former non-ferrous ore smelter in Romania, was assessed using the drinking water quality index (DWQI), hazard quotient (HQ) and total hazard quotient (THQ). A total of 29 water samples collected from 26 wells and 3 springs used as drinking water sources, located in near proximity to agricultural, industrial or household contamination sources, were characterized. The obtained results indicated high NO₂^?, NO₃^?, Cd and Mn levels that exceeded the corresponding maximum allowable concentrations. According to the DWQI values, only 10% of water sources have acceptable quality, while 21% are threatened, and 69% have poor- quality. The health risk assessment suggested a high risk for NO₃^? for more than 72% of the drinking waters HQ_NO3^??>?1.0 but no risk for metals and NO₂^? (HQ_metals< 1.0; HQ_NO2^?< 1.0).     

Study of partitioning and dynamics of metals in contaminated soil using modified four-step BCR sequential extraction procedure

The modified four-step BCR sequential extraction procedure (exchangeable and weak acid available species, reducible, oxidisable and residual fractions) was used to examine the distribution of As, Cd, Cr, Cu, Pb, and Zn with soil depth in an area (Baia Mare — Bozanta, Romania) with both high natural level of elements considered as toxic and historical pollution resulting from nonferrous metallurgy. The BCR approach proved a high metal input of anthropogenic origin down to 40 cm, while at lower depths the naturally elevated metal content must be considered. Results of the partitioning study and XRD analysis of solid matrix showed the greatest potential for chemical remobilisation of Cd, Zn, and Cu in weak acidic medium as well as their affinity for the oxidisable fraction (organic matter/sulphide). The tendency of Cr, Pb, and As to be immobilised as residual or reducible species on Fe-Mn oxides was evident. Although the partitioning of As in chemically inactive forms such as scorodite (FeAsO₄ · 2H₂O) soluble under reducible conditions and beudantite (PbFe₃(AsO₄)(SO₄)(OH)₂)), a residual species soluble in acid media, chemical mobilisation from soil in groundwater was confirmed. Dynamic processes of metal retention in soil under different conditions, namely acidic, reducing or oxidisable, were predicted from the Pearsonșs correlation analysis of element species with soil characteristics and components such as Fe, Mn, organic matter content, pH, and total element content, respectively. At the moment of the study, soil and groundwater in the area were found to be polluted with As, Cd, Cu, Pb and Zn. Presented at the 35th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 26–30 May 2008.     

Simultaneous Determination of As,Bi, Sb,Se, Te,Hg, Pb and Sn by Small-Sized Electrothermal Vaporization Capacitively Coupled Plasma Microtorch Optical Emission Spectrometry Using Direct Liquid Microsampling

The simultaneous determination of chemical vapor-generating elements involving derivatization is difficult even by inductively coupled plasma optical emission spectrometry or mass spectrometry. This study proposes a new direct liquid microsampling method for the simultaneous determination of As, Bi, Se, Te, Hg, Pb, and Sn, using a fully miniaturized set-up based on electrothermal vaporization capacitively coupled plasma microtorch optical emission spectrometry. The method is cost-effective, free from non-spectral interference, and easy to run by avoiding derivatization. The method involves the vaporization of analytes from the 10 µL sample and recording of episodic spectra generated in low-power (15 W) and low-Ar consumption (150 mL min⁻¹) plasma microtorch interfaced with low-resolution microspectrometers. Selective vaporization at 1300 °C ensured the avoidance of non-spectral effects and allowed the use of external calibration. Several spectral lines for each element even in the range 180–210 nm could be selected. Generally, this spectral range is examined with large-scale instrumentation. Even in the absence of derivatization, the obtained detection limits were low (0.02–0.75 mg kg⁻¹) and allowed analysis of environmental samples, such as cave and river sediments. The recovery was in the range of 86–116%, and the accuracy was better than 10%. The method is of general interest and could be implemented on any miniaturized or classical laboratory spectrometric instrumentation.     

Assessment of different sorbents efficiency for solid phase extraction of aquatic humic acids

In the present study, a simple procedure for the isolation by solid-phase extraction (SPE) and quantification by UV-Vis spectrometry (400 nm) of the humic acids (HAs) in the natural waters was developed. Seven different sorbents: Porapak P (polystyrene-divinylbenzene copolymer), Florisil (chemical composition: 84.0% SiO₂, 15.5% MgO and 0.5% Na₂SO₄), Silica gel C18 (octadecyl silane), Strata X (surface modified polystyrene-divinylbenzene), Strata NH₂ (silica-based trifunctional amino ligand), Strata SAX (silica-based trifunctional quaternary amine) and Strata C18-E (silica-based trifunctional C18 with hydrophobic end-capping of silanols) were tested. The HAs, adsorbed on SPE cartridges, were eluted using: NaOH (0.1 M), sodium dodecyl sulphate (SDS) (20 g L⁻¹), and a 1:1 v/v mixture of SDS (20 g L⁻¹) and NaOH (0.1 M). The extraction efficiency was evaluated by comparing the HAs recovery levels. The repeatability of results was estimated by the relative standard deviation (RSD). The data confirmed that Porapak P, Silica gel C18, Florisil, Strata NH₂ and Strata X could be good alternatives for the traditional isolation of the aquatic HAs with XAD resin. The proposed method was applied for the determination of HAs in some waters sampled from the Western Romanian Plain. The content of HAs was correlated with the arsenic concentration and total organic carbon (TOC) level.