Korrosionsuntersuchung

Ohne Zusammenfassung     

Narrow linewidth 2 μm optical parametric oscillation in periodically poled LiNbO<Subscript>3</Subscript> with volume Bragg grating outcoupler

An optical parametric oscillator using a periodically poled LiNbO₃ crystal and a volume Bragg grating output coupler is presented. Signal and idler wavelengths of 2008 and 2264 nm were generated from the 1064 nm Nd:YVO₄ pump laser. The Bragg grating was reflecting in a narrow band around 2008 nm, creating a purely singly resonant cavity. Signal and idler linewidths of approximately 0.44 and 0.72 nm, respectively, were measured. This is a reduction of 80 and 60 times compared to when using a mirror as output coupler. A total output energy of 156 μJ was measured with 47% slope efficiency. PACS 42.65.Yj; 42.72.Ai; 42.40.Eq     

Protein identification platform utilizing micro dispensing technology interfaced to matrix-assisted laser desorption ionization time-of-flight mass spectrometry

An integrated protein microcharacterization/identification platform has been developed. The system has been designed to allow a high flexibility in order to tackle challenging analytical problems. The platform comprises a cooled microautosampler, an integrated system for microcolumn HPLC, and a capillary reversed-phase column that is interfaced to matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) system via a low internal volume flow-through microdispenser. The chromatographic separation is continuously transferred onto a MALDI target plate as discrete spots as the dispenser ejects bursts of droplets of the column effluent in a precise array pattern. A refrigerated microfraction collector was coupled to the outlet of the flow-through microdispenser enabling enrichment and re-analysis of interesting fractions. The use of target plates pre-coated with matrix simplified and increased the robustness of the system. By including a separation step prior to the MALDI-TOF-MS analysis and hereby minimizing suppression effects allowed us to obtain higher sequence coverage of proteins compared to conventional MALDI sample preparation methodology. Additionally, synthetic peptides corresponding to autophosphorylated forms of the tryptic fragment 485-496 (ALGADDSYYTAR) of tyrosine kinase ZAP-70 were identified at sensitivities reaching 150 amol.     

Flow-through microdispenser for interfacing micro-HPLC to Raman and mid-IR spectroscopic detection

A flow-through microdispenser has been coupled to a micro HPLC separation system and used as a solvent elimination interface for Fourier transform infrared (FTIR) and Raman spectroscopic detection of the separated compounds. Using the microdispenser picoliter sized droplets can be generated and deposited on an appropriate target placed on a computerized x, y-stage. Evaporation of volatile solvent and buffer is rapid and allows analysis of the obtained dry deposits by various techniques. Due to the destruction free character of Raman and FTIR spectroscopy they can be applied sequentially to interrogate the same deposit. In the reported application five phenolic acids typically present in wine have been separated on a C-18 column technique using a mixture of water, methanol and acetic acid as mobile phase. For spectrum acquisition infrared and Raman microscopes have been used. The spectra recorded from the dried deposits of the separated compounds agreed well with the reference spectra of corresponding components.     

Homogeneous sample preparation for automated high throughput analysis with matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

This work presents a simple method for obtaining homogeneous sample surfaces in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS) for the automated analysis of peptides and proteins. The sample preparation method is based on applying the sample/matrix mixture onto a pre-deposited highly diluted matrix spot. The pre-deposited crystals act as seeds for the new sample containing crystals which become much smaller in size and more evenly distributed than with conventional methods. This 'seed-layer' method was developed, optimised and compared with the dried-droplet method using peptides and proteins in the 1000-20,000 Da range. The seed-layer method increases the surface homogeneity, spot to spot reproducibility and sample washability as compared with the commonly used dried-droplet method. This methodology is applicable to alpha-cyanohydroxycinnamic acid, sinapinic acid and ferulic acid, which all form homogeneous crystal surfaces. Within-spot variation and between-spot variation was investigated using statistics at a 95% confidence level (n = 36). The statistical values were generated from more than 5000 data points collected from 500 spectra. More than 90% of the sample locations results in high intensity spectra with relatively low standard deviations (RSDs). Typically obtained data showed an RSD of 19-35% within a sample spot as well as in-between spots for proteins, and an RSD of < or = 50% for peptides. Linear calibration curves were obtained within one order of magnitude using internal calibration with a point-RSD of 3% (n = 10). The sample homogeneity allows mass spectra (average of 16 laser shots) to be obtained on each individual sample within 15 sec, whereby a 100 spot target plate can be run in 25 min. High density target plates using the seed-layer method were prepared by spotting approximately 100 picoliter droplets onto the target, resulting in sample spots < or = 500 microns in diameter using a flow-through piezo-electric micro-dispenser. By using this automated sample preparation step lower standard deviations are obtained in comparison to manually prepared samples.     

Simultaneous second-harmonic generation with two orthogonal polarization states in periodically poled KTP

Simultaneous generation of second-harmonic light with orthogonal polarizations in the blue spectral region is demonstrated by use of typeII and typeI quasi-phase matching for the nonlinear coefficients d(33) , d(24) , and d(32) in periodically poled KTP. The second-harmonic power ratio in both polarization states can be tuned by the fundamental polarization and (or) the periodically poled KTP temperature. Femtosecond pulse frequency-doubling efficiencies of as much as 39.5% W (-1) and 8.1% W (-1) are demonstrated in 7-mm periodically poled KTP for typeI and typeII processes, respectively. The efficiency limitations caused by various effects of the group-velocity mismatch are discussed.     

Generation of 740 mW of blue light by intracavity frequency doubling with a first-order quasi-phase-matched KTiOPO(4) crystal

We report on efficient intracavity frequency doubling of a cw diode-pumped Nd:YAG laser on the (4)F(3/2)?(4)I(9/2) laser transition at 946 nm. The nonlinear crystal used in the experiments was a first-order quasi-phase-matched flux-grown KTiOPO(4) crystal (period, 6.09mum ; thickness, 1 mm; length, 9 mm). The fluctuations in the generated second-harmonic wave were lower than 3% at output powers of as much as 500 mW. The overall optical-to-optical efficiency was 5.7%. A maximum output power of 740 mW of blue light was generated, which was stable for only 0.5 min. The decrease the output power at this power level was attributed to heating and thermal lensing in the periodically poled KTiOPO(4) crystal. The short-term behavior of the second-harmonic wave exhibited switching between a cw mode and chaotic intensity fluctuations.     

Nanosecond optical parametric oscillator based on large-aperture periodically poled RbTiOAsO(4)

We report on optical parametric oscillators (OPO's) based on periodically poled RbTiOAsO(4) (PP RTA), which are pumped by Q -switched solid-state lasers. With a diode-pumped Nd:YVO(4) laser (pulse energy, 800microJ ; pulse duration, 5.5 ns; repetition rate, 1 kHz) the PP RTA OPO generated 1.58-microm signal and 3.26-microm idler radiation with a signal pulse energy of 45microJ . The large aperture of 3 mmx3 mm of the PP RTA crystal also permitted OPO operation with pump pulse energies as high as 65 mJ, provided by a flash-lamp-pumped Q -switched Nd:YAG laser (pulse duration, 20 ns; repetition rate, 10 Hz). With this pump source the OPO generated signal pulse energies as high as 17 mJ, corresponding to an efficiency of 26%. The performance of this OPO shows that large-aperture PP RTA crystals are well suited for pulsed nanosecond OPO operation with pump pulse energies of tens of millijoules.     

Continuous separation of lipid particles from erythrocytes by means of laminar flow and acoustic standing wave forces

Improved continuous acoustic particle separation (separation efficiency close to 100%) and separation of erythrocytes (red blood cells) from lipid microemboli in whole blood is reported.