Decay of neutron-rich Ga isotopes near N = 50 at PARRNe

The PARRNe facility has been used to produce neutron-rich isotopes ^83,84Gaby the ISOL method. Their decay has been studied, and β-γ coincidence and γ-γ coincidence data were collected as a function of time. The first two excited levels in ⁸³Ge and the first excited level in ⁸⁴Ge have been measured for the first time.     

Impacts of structural-acoustic coupling on the performance of energy density-based active sound transmission control

This paper investigates numerically the performance of the active sound transmission control into a rectangular cavity through a flexible panel under the energy density-based error-sensing algorithm. Full coupling between the sound transmitting panel and the enclosed space is considered. A pure vibration actuator, a pure acoustic source and a combined control source system are used as the secondary control source in the active control and their performances are studied. Formulae for the coupled eigenfrequencies of the cavity and the flexible panel are also derived. The strength of the structural-acoustic coupling, the ratio between the first eigenfrequencies of the cavity and the panel and the difference between the excitation frequency and the coupled eigenfrequencies, especially the latter, are found to have crucial impacts on the performance of the active control regardless the type of control source used.     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

Theoretical study of the Diels-Alder reactions between singlet (1Delta g) oxygen and acenes

The G3(MP2) method has been employed to study the 1,4-addition reactions between singlet oxygen and five acenes, including benzene, naphthalene, anthrecene, tetracene, and pentacene. In all, nine pathways between O(2) and the five acenes have been investigated. Our calculated results indicate that all nine pathways are concerted and exothermic and that the most reactive sites on the acenes are the center ring's meso-carbons. In addition, reactivity increases along the series benzene < naphthalene < anthrecene < tetracene < pentacene. This trend is identical to that of aromaticity for the five acenes. A correlation between reactivity and aromaticity is briefly rationalized with natural bond orbital (NBO) analysis and frontier molecular orbital (FMO) analysis. Furthermore, some experimental kinetics data from the literature supporting the calculated results are cited.     

Stoichiometric and catalytic oxidations of alkanes and alcohols mediated by highly oxidizing ruthenium-Oxo complexes bearing 6, 6'-dichloro-2,2'-bipyridine

The ruthenium(II) complex cis-[Ru(6, 6'-Cl(2)bpy)(2)(OH(2))(2)](CF(3)SO(3))(2) (1) is a robust catalyst for C-H bond oxidations of hydrocarbons, including linear alkanes, using tert-butyl hydroperoxide (TBHP) as terminal oxidant. Alcohols can be oxidized by the "1 + TBHP" protocol to the corresponding aldehydes/ketones with high product yields at ambient temperature. Oxidation of 1 with Ce(IV) in aqueous solution affords cis-[Ru(VI)(6, 6'-Cl(2)bpy)(2)O(2)](2+), which is isolated as a green/yellow perchlorate salt (2). Complex 2 is a powerful stoichiometric oxidant for cycloalkane oxidations under mild conditions. Oxidation of cis-decalin is highly stereoretentive; cis-decalinol is obtained in high yield, and formation of trans-decalinol is not observed. Mechanistic studies showing a large primary kinetic isotope effect suggest a hydrogen-atom abstraction pathway. The relative reactivities of cycloalkanes toward oxidation by 2 have been examined through competitive experiments, and comparisons with Gif-type processes are presented.     

Ethynylated N-phenylbenzimidazoles: Synthesis and thermal properties

Three diethynylated bisbenzimidazole prepolymers were synthesized and their polymerization characteristics examined. N-phenyl-substituted diethynylated bisbenzimidazoles melted between 250 and 265°C and had gel times of several seconds to several minutes. In contrast, an N-phenoxyphenyl diethynylated bisbenzimidazole melted at a temperature sufficiently low (ca. 150°C) to provide a 5-min gel time at 170°C and a 4-min gel time at 210°C. This material showed promise as a potential laminating resin and a brief screening of the prepolymer for this application was carried out. The polymers of both N-phenyl- and N-phenoxyphenyl-substituted diethynylated bisbenzimidazoles showed apparent degradation temperatures of 500°C or greater when examined by thermogravimetric analysis.     

Rhodopsin reconstituted into a planar-supported lipid bilayer retains photoactivity after cross-linking polymerization of lipid monomers

Transmembrane proteins (TMPs), particularly ion channels and receptors, play key roles in transport and signal transduction. Many of these proteins are pharmacologically important and therefore targets for drug discovery. TMPs can be reconstituted in planar-supported lipid bilayers (PSLBs), which has led to development of TMP-based biosensors and biochips. However, PSLBs composed of natural lipids lack the high stability desired for many technological applications. One strategy is to use synthetic lipid monomers that can be polymerized to form robust bilayers. A key question is how lipid polymerization affects TMP structure and activity. In this study, we have examined the effects of UV polymerization of bis-Sorbylphosphatidylcholine (bis-SorbPC) on the photoactivation of reconstituted bovine rhodopsin (Rho), a model G-protein-coupled receptor. Plasmon-waveguide resonance spectroscopy (PWR) was used to compare the degree of Rho incorporation and activation in fluid and poly(lipid) PSLBs. The results show that reconstitution of Rho into a supported lipid bilayer composed only of bis-SorbPC, followed by photoinduced lipid cross-linking, does not measurably diminish protein function.