Magnetism and magneto-transport studies in sonochemically prepared amorphous Co100−xPtx nano alloys

Bulk amorphous Co_(100−x)Pt_x (0≤x≤50) nano-alloys have been synthesized using high frequency ultrasound, displaying single domain (4-5 nm) behavior wherein weakly exchange-coupled particles lead to a field-dependent resistivity behavior. Magneto-resistivity is correlated to the order-disorder parameter in these powder compacts. The plot of Δρ/ρ₀ as a function of reduced magnetization indicates that all the systems are weakly exchange coupled.     

An electron microscopic and enzymic study of rat liver peroxisomal nucleoid core and its association with urate oxidase

The appearance of the characteristic crystalloid core of rat liver peroxisomes is emulated by the electron microscopic (EM) appearance of highly purified urate oxidase prepared from the same tissue. The purity of the enzyme preparation was established by gel electrophoresis under various conditions and the specific enzyme activity was at least as high as any previously reported. The amino acid composition of urate oxidase was determined. As additional evidence for close association of the peroxisomal core with urate oxidase, it was demonstrated that the biphasic changes in rat liver urate oxidase activity in response to prolonged starvation were paralleled by changes in the EM appearance of peroxisomes. Under comparable conditions catalase, another peroxisomal enzyme, did not show the same changes in activity as did urate oxidase. Evidence for the possible identity of urate oxidase with the peroxisomal crystalloid of rat liver has been presented, all materials having been obtained from, and experiments performed with, the rat.     

Microemulsion-based synthesis of CeO(2) powders with high surface area and high-temperature stabilities

Pure ceria powders, CeO(2), were synthesized in heptane-microemulsified aqueous solutions of CeCl(3) or Ce(NO(3))(3) stabilized by AOT (sodium bis(2-ethylhexyl) sulfosuccinate), DDAB (di-n-didodecyldimethylammonium bromide), or DDAB + Brij 35 surfactant mixtures. Micellar DTAB (n-dodecyltrimethylammonium bromide) and vesicular DDAB systems were also used as media for generating CeO(2). Characterization of the powders by X-ray powder diffractometry, laser-Raman spectroscopy, and Fourier transform infrared spectroscopy revealed that in the presence of surfactants almost-agglomerate-free nanosized crystallites (6-13 nm) of anionic vacancy-free cubic CeO(2) were produced. In the absence of surfactants 21-nm-sized crystallites were formed, comparing with the 85-nm-sized crystallites when cubic CeO(2) was created via thermal decomposition of cerium oxalate. Surface characterization, by X-ray photoelectron spectroscopy, N(2) sorptiometry, and high-resolution electron microscopy showed AOT- or (DDAB + Brij 35)-stabilized microemulsions to assist in formation of crystallites exposing surfaces of large specific areas (up to ca. 250 m(2)/g) but of low stability to high-temperature calcination (28-13 m(2)/g at 800 degrees C). In contrast, the double-chained DDAB was found to generate cubic CeO(2) crystallites of lower initial surface areas (144 (microemulsion) to 125 (vesicles) m(2)/g)) but of higher thermal stability (55-45 m(2)/g at 800 degrees C). Hence, the latter cerias could be considered as appropriate components for total oxidation (combustion) catalysts.     

Flotation-spectrophotometric method for the determination of mercury using iodide and brilliant green

This paper describes a sensitive spectrophotometric method for the determination of mercury, based on the flotation of a mercury iodide-brilliant green complex with cyclohexane at pH 5 and dissolution of the complex in acetone. The absorbance of the complex is measured at 625 nm. Beer's law is obeyed from 4–500 g/l of mercury. The method is highly sensitive ( = 5.96 × 10⁵ 1 mol^–1 cm^–1) and selective, as it is free from interferences by almost all cations and anions in the presence of EDTA. Furthermore, a two-level orthogonal array design as a chemometric method has been used for optimization of the various parameters involved. The method has been successfully applied to paper industry effluents.     

Soot deep oxidation catalyzed by molybdena and molybdates: a thermogravimetric investigation

Molybdena (MoO₃) and molybdates of bismuth (Bi₂Mo₃O₁₂), chromium (Cr₂Mo₃O₁₂), barium (BaMoO₄), manganese (MnMoO₄) and copper (Cu₃Mo₂O₉) were synthesized and characterized by X-ray powder diffractometry and infrared spectroscopy. They were then assessed as ‘loose contact' catalysts for soot deep oxidation (combustion) in air by thermogravimetry. A similar assessment was carried out on commercial chromia (Cr₂O₃) and tungsta (WO₃). Observed high oxidation activity of MoO₃, as compared to both Cr₂O₃ and WO₃, is attributed to the higher volatility (mobility) of MoO_x species. On similar grounds, observed high activity of MoO₃ and Cu₃Mo₂O₉, as compared to the other test molybdates, is explained. Relatively speaking, however, a higher activity was observed for Cu₃Mo₂O₉ than MoO₃, whereby soot ignition temperature decreased from 571°C (uncatalyzed oxidation) to 430°C, to occur within the temperature range of diesel exhaust (200–450°C). This observation is ascribed to copper-promoted redox conduct of Mo(VI) in the oxidation reaction of soot. Kinetics of the reaction was studied non-isothermally, and the kinetic parameters (A, k, ΔE and the reaction order) were calculated.     

Reduced fluidity of dipalmitoyl phosphatidic acid membranes by salicylic acid

This paper presents DSC and NMR study of how the kerotolytic drug, salicylic acid (SA), affects the thermotropic and morphological behavior of a model membrane, dipalmitoyl phosphatidic acid (DPPA). The membrane-drug system has been studied in the multilamellar vesicular (MLV) and in the unilamellar vesicular (ULV) forms, for SA/DPPA molar ratios from 0 to 0.5. The mode of interaction of SA molecules with DPPA is similar in MLV and ULV. Chain-melting transition becomes sharper and shifts to higher temperatures in the presence of the drug, implying an enhanced co-operativity of the acyl chains. NMR and DSC data indicate that the drug molecules are located in the aqueous interfacial region neighboring the lipid headgroups. The membrane becomes more rigid in the presence of the drug molecules, due to a stronger interaction between the lipid headgroups leading to reduced permeability. ULVs are destroyed by even a short equilibration at room temperature, whereas prolonged equilibration of the MLV only leads to a slightly reduced interaction between the lipid headgroups due to sequestering of the drug molecules in the interfacial aqueous region.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Synthesis,physicochemical characterization and biological activity of nano complexes of iron(III) of 3(2'‐hydroxyphenyl)‐5‐(4′‐substituted phenyl) pyrazolines and aspartic acid

Mixed ligand complexes of Iron(III) with aspartic acid and 3(2′‐hydroxy phenyl)‐5‐(4′‐substituted phenyl) pyrazolines of type [Fe(C₄O₄NH₆)₂(C₁₅H₁₂N₂OX)] and [Fe(C₄O₄NH₆)(C₁₅H₁₂N₂OX)₂], where (C₄O₄NH₆) = aspartate, (C₁₅H₁₂N₂OX) = deprotonated 3(2′‐hydroxyphenyl)‐5‐(4′‐substituted phenyl) pyrazolines (X = H, CH₃, OCH₃, Cl), have been synthesized. These newly synthesized derivatives have been physicochemically characterized by elemental analysis (C, H, N, Cl and Fe), magnetic moment data, thermogravimetric analysis, molar conductance, cyclic voltammetry, spectral analysis (UV–visible, IR, far IR and fast atom bombardment mass spectrometry). Scanning electron microscopy, transmission electron microscopy and X‐ray powder diffraction studies have been carried out for powdered samples, which show nanometric particles of these derivatives. Antibacterial and antifungal potential of free pyrazoline and some iron(III) complexes have been evaluated. Copyright © 2012 John Wiley & Sons, Ltd.     

N-donor stabilized complexes of nickel(II) diphenyldithiophosphates: single-crystal X-ray,HSA and computational analysis

Transition Metal Chemistry - Nickel(II) complexes with octahedral coordination stabilized by N-donor ligands corresponds to [{(ArO)2PS2}2Ni·L2] [Ar = 4-(C2H5)C6H4 (3), and...