A novel ruthenium(II) complex for two-photon absorption-based optical power limiting in the near-IR range

In this article, the synthesis of a novel high-conjugated ligand and its corresponding Ru(II) complex PTFTF:Ru is reported, along with the linear and nonlinear optical characterizations. Two-photon absorption based optical power limiting properties (OPL), especially in the near infrared, are described and compared to those of the analogous complexes previously published. Combined with a preliminary theoretical approach, this allows us to highlight several key parameters for OPL optimization in such molecular systems and more particularly the spectral overlap between TPA and excited-state absorption.     

Assessment of density functionals for the high-spin/low-spin energy difference in the low-spin iron(II) tris(2,2'-bipyridine) complex.

In the iron(II) low-spin complex [Fe(bpy)3]2+, the zero-point energy difference between the 5T2g(t4(2g)e2g) high-spin and the 1A(1g)(t(6)2g) low-spin states, Delta(E)0HL, is estimated to lie in the range of 2500-5000 cm(-1). This estimate is based on the low-temperature dynamics of the high-spin-->low-spin relaxation following the light-induced population of the high-spin state and on the assumption that the bond-length difference between the two states Delta(r)HL is equal to the average value of approximately 0.2 A, as found experimentally for the spin-crossover system. Calculations based on density functional theory (DFT) validate the structural assumption insofar as the low-spin-state optimised geometries are found to be in very good agreement with the experimental X-ray structure of the complex and the predicted high-spin geometries are all very close to one another for a whole series of common GGA (PB86, PW91, PBE, RPBE) and hybrid (B3LYP, B3LYP*, PBE1PBE) functionals. This confirmation of the structural assumption underlying the estimation of Delta(E)0HL from experimental relaxation rate constants permits us to use this value to assess the ability of the density functionals for the calculation of the energy difference between the HS and LS states. Since the different functionals give values from -1000 to 12000 cm(-1), the comparison of the calculated values with the experimental estimate thus provides a stringent criterion for the performance of a given functional. Based on this comparison the RPBE and B3LYP* functionals give the best agreement with experiment.     

Some comments on Wolfe's ‘away step’

We give a detailed proof, under slightly weaker conditions on the objective function, that a modified Frank-Wolfe algorithm based on Wolfe's away step strategy can achieve geometric convergence, provided a strict complementarity assumption holds.Research supported by FCAC (Québec) and NSERC (Canada).     

Comparison of density functionals for energy and structural differences between the high- [5T2g:(t2g)4(eg)2] and low- [1A1g:(t2g)6(eg)0] spin states of iron(II) coordination compounds. II. More functionals and the hexaminoferrous cation, [Fe(NH3)6]2+

The ability of different density functionals to describe the structural and energy differences between the high- [(5)T(2g):(t(2g))(4)(e(g))(2)] and low- [(1)A(1g):(t(2g))(6)(e(g))(0)] spin states of small octahedral ferrous compounds is studied. This work is an extension of our previous study of the hexaquoferrous cation, [Fe(H(2)O)(6)](2+), [J. Chem. Phys. 120, 9473 (2004)] to include a second compound-namely, the hexaminoferrous cation, [Fe(NH(3))(6)](2+)-and several additional functionals. In particular, the present study includes the highly parametrized generalized gradient approximations (GGAs) known as HCTH and the meta-GGA VSXC [which together we refer to as highly parametrized density functionals (HPDFs)], now readily available in the GAUSSIAN03 program, as well as the hybrid functional PBE0. Since there are very few experimental results for these molecules with which to compare, comparison is made with best estimates obtained from second-order perturbation theory-corrected complete active space self-consistent field (CASPT2) calculations, with spectroscopy oriented configuration interaction (SORCI) calculations, and with ligand field theory (LFT) estimations. While CASPT2 and SORCI are among the most reliable ab initio methods available for this type of problem, LFT embodies many decades of empirical experience. These three methods are found to give coherent results and provide best estimates of the adiabatic low-spin-high-spin energy difference, DeltaE(LH) (adia), of 12 000-13 000 cm(-1) for [Fe(H(2)O)(6)](2+) and 9 000-11 000 cm(-1) for [Fe(NH(3))(6)](2+). All functionals beyond the purely local approximation produce reasonably good geometries, so long as adequate basis sets are used. In contrast, the energy splitting, DeltaE(LH) (adia), is much more sensitive to the choice of functional. The local density approximation severely over stabilizes the low-spin state with respect to the high-spin state. This "density functional theory (DFT) spin pairing-energy problem" persists, but is reduced, for traditional GGAs. In contrast the hybrid functional B3LYP underestimates DeltaE(LH) (adia) by a few thousands of wave numbers. The RPBE GGA of Hammer, Hansen, and Norskov gives good results for DeltaE(LH) (adia) as do the HPDFs, especially the VSXC functional. Surprisingly the HCTH functionals actually over correct the DFT spin pairing-energy problem, destabilizing the low-spin state relative to the high-spin state. Best agreement is found for the hybrid functional PBE0.     

Feasibility of using INAA for biomonitoring of heavy metals and other elements in human ectoderm derivatives

For systematic checking of the feasibility of determining elements by INAA in scalp hair, pubic hair and toenails, three different regimes were employed by varying the activation time and cooling time prior to -ray spectrometric measurements. The combination of these three regimes (activation time 1 min, cooling time 10 min; activation time 5 h, cooling time 5 d; activation time 5 h, cooling time 30 d) made it possible to determine the following 20 elements in most samples: Al, As, Br, Ca, Ce, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mn, Na, S, Sb, Se, Zn. Further 10 elements (Ba, Cd, Mo, Ni, Rb, Sc, Sm, Th, V, W) were detectable only in some samples, however, with a fairly good precision, so that they could be detected in this way in the case of elevated concentrations exceeding physiological limits.     

Ab initio static and molecular dynamics study of 4-styrylpyridine.

We report an in‐depth theoretical study of 4‐styrylpyridine in its singlet S₀ ground state. The geometries and the relative stabilities of the trans and cis isomers were investigated within density functional theory (DFT) as well as within Hartree–Fock (HF), second‐order Møller–Plesset (MP2), and coupled cluster (CC) theories. The DFT calculations were performed using the B3LYP and PBE functionals, with basis sets of different qualities, and gave results that are very consistent with each other. The molecular structure is thus predicted to be planar at the energy minimum, which is associated with the trans conformation, and to become markedly twisted at the minimum of higher energy, which is associated with the cis conformation. The results of the calculations performed with the post‐HF methods approach those obtained with the DFT methods, provided that the level of treatment of the electronic correlation is high enough and that sufficiently flexible basis sets are used. Calculations carried out within DFT also allowed the determination of the geometry and the energy of the molecule at the biradicaloid transition state associated with the thermal cis?trans isomerization and at the transition states associated with the enantiomerization of the cis isomer and with the rotations of the pyridinyl and phenyl groups in the trans and cis isomers. Car–Parrinello molecular dynamics simulations were also performed at 50, 150, and 300 K using the PBE functional. The studies allowed us to evidence the highly flexible nature of the molecule in both conformations. In particular, the trans isomer was found to exist mainly in a nonplanar form at finite temperatures, while the rotation of the pyridinyl ring in the cis isomer was incidentally observed to take place within ≈1 ps during the simulation carried out at 150 K on this isomer.     

Investigation of the reduced high-potential iron-sulfur protein from chromatium vinosum and relevant model compounds: a unified picture of the electronic structure of [Fe(4)S(4)](2+) systems through magnetic and optical studies

Magnetization measurements and variable temperature optical spectroscopy have been used to investigate, within the 4-300 K temperature range, the electronic structure of the reduced high-potential iron protein (HiPIP) from Chromatium vinosum and the model compounds (Cat)(2)[Fe(4)S(4)(SR)(4)], where RS(-) = 2,4,6-triisopropylphenylthiolate (1), 2,6-diphenylphenylthiolate (2), diphenylmethylthiolate (3), 2,4,6-triisopropylbenzylthiolate (4, 4'), 2,4,6-triphenylbenzylthiolate (5, 5'), 2,4,6-tri-tert-butylbenzylthiolate (6), and Cat(+) = (+)NEt(4) (1, 2, 3, 4', 5', 6), (+)PPh(4) (4, 5). The newly synthesized 2(2)(-), 3(2)(-), 5(2)(-), and 6(2)(-) complexes are, as 1(2)(-) and 4(2)(-), excellent models of the reduced HiPIPs: they exhibit the [Fe(4)S(4)](3+/2+) redox couple, because of the presence of bulky ligands which stabilize the [Fe(4)S(4)](3+) oxidized core. Moreover, the presence of SCH(2) groups in 4(2)(-), 5(2)(-), and 6(2)(-), as in the [Fe(4)S(4)] protein cores, makes them good biomimetic models of the HiPIPs. The X-ray structure of 2 is reported: it crystallizes in the orthorhombic space group Pcca with no imposed symmetry and a D(2)(d)()-distorted geometry of the [Fe(4)S(4)](2+) core. Fit of the magnetization data of the reduced HiPIP and of the 1, 2, 3, 4, 5, and 6 compounds within the exchange and double exchange theoretical framework leads to exchange coupling parameters J = 261-397 cm(-)(1). A firm determination of the double exchange parameters B or, equivalently, the transfer integrals beta = 5B could not be achieved that way. The obtained |B| values remain however high, attesting thus to the strength of the spin-dependent electronic delocalization which is responsible for lowest lying electronic states being characterized by delocalized mixed-valence pairs of maximum spin (9)/(2). Electronic properties of these systems are then accounted for by the population of a diamagnetic ground level and excited paramagnetic triplet and quintet levels, which are respectively J and 3J above the ground level. Optical studies of 1, 2, 4', 5', and 6 but also of (NEt(4))(2)[Fe(4)S(4)(SCH(2)C(6)H(5))(4)] and the isomorph (NEt(4))(2)[Fe(4)S(4)(S-t-Bu)(4)] and (NEt(4))(2)[Fe(4)Se(4)(S-t-Bu)(4)] compounds reveal two absorption bands in the near infrared region, at 705-760 nm and 1270-1430 nm, which appear to be characteristic of valence-delocalized and ferromagnetically coupled [Fe(2)X(2)](+) (X = S, Se) units. The |B| and |beta| values can be directly determined from the location at 10|B| of the low-energy band, and are respectively of 699-787 and 3497-3937 cm(-)(1). Both absorption bands are also present in the 77 K spectrum of the reduced HiPIP, at 700 and 1040 nm (Cerdonio, M.; Wang, R.-H.; Rawlings, J.; Gray, H. B. J. Am. Chem. Soc. 1974, 96, 6534-6535). The blue shift of the low-energy band is attributed to the inequivalent environments of the Fe sites in the protein, rather than to an increase of |beta| when going from the models to the HiPIP. The small differences observed in known geometries of [Fe(4)S(4)](2+) clusters, especially in the Fe-Fe distances, cannot probably lead to drastic changes in the direct Fe-Fe interactions (parameter beta) responsible for the delocalization phenomenon. These differences are however magnetostructurally significant as shown by the 261-397 cm(-)(1) range spanned by J. The cluster's geometry, hence the efficiency of the Femicro(3)-S-Fe superexchange pathways, is proposed to be controlled by the more or less tight fit of the cluster within the cavity provided by its environment.     

Chiroptical and computational studies of a bridled chiroporphyrin and of its nickel(II), copper(II), and zinc(II) complexes

Circular dichroism (CD) spectra and density functional theory (DFT) calculations are reported for a series of conformationally bistable chiroporphyrins with 8-methylene bridles MBCP-8, which can display either an alphaalphaalphaalpha or an alphabetaalphabeta orientation of their meso substituents. From DFT geometry optimizations, the most stable form of ZnBCP-8 is found to be the alphaalphaalphaalpha conformer. By passing to NiBCP-8, there is a strong stabilization of the alphabetaalphabeta conformation with respect to the alphaalphaalphaalpha conformation, consistent with the X-ray structures of alphaalphaalphaalpha-ZnBCP-8 and alphabetaalphabeta-NiBCP-8. A correlation between the sign of the CD signal in the Soret region and the conformation of the BCP-8 compounds is reported: the alphaalphaalphaalpha conformers H2BCP-8 and ZnBCP-8 show a positive CD signal, whereas the alphabetaalphabeta conformers NiBCP-8 and CuBCP-8 exhibit a negative signal. The possible contributions to the rotational strengths of alphabetaalphabeta-NiBCP-8 and alphaalphaalphaalpha-ZnBCP-8, calculated on the basis of their crystal structures, have been analyzed. The CD signals are found to result from a combination of both the inherent chirality of the porphyrin and of extrinsic contributions due to the chiral bridles. These results may have a broad significance for understanding the chiroptical properties of chiral porphyrins and hemoproteins and for monitoring stimuli-responsive, conformationally bistable chiroporphyrin compounds.     

Quantitative Assessment of B−B−B,B−Hb−B,and B−Ht Bonds: From BH3 to B12H122−

We report the thermodynamic stabilities and the intrinsic strengths of three-center-two-electron B−B−B and B−H_b−B bonds ( : bridging hydrogen), and two-center-two-electron B−H_t bonds ( : terminal hydrogen) which can be served as a new, effective tool to determine the decisive role of the intermediates of hydrogenation/dehydrogenation reactions of borohydride. The calculated heats of formation were obtained with the G4 composite method and the intrinsic strengths of B−B−B, B−H_b−B, and B−H_t bonds were derived from local stretching force constants obtained at the B3LYP-D2/cc-pVTZ level of theory for 21 boron-hydrogen compounds, including 19 intermediates. The Quantum Theory of Atoms in Molecules (QTAIM) was used to deepen the inside into the nature of B−B−B, B−H_b−B, and B−H_t bonds. We found that all of the experimentally identified intermediates hindering the reversibility of the decomposition reactions are thermodynamically stable and possess strong B−B−B, B−H_b−B, and B−H_t bonds. This proves that thermodynamic data and intrinsic B−B−B, B−H_b−B, and B−H_t bond strengths form a new, effective tool to characterize new (potential) intermediates and to predict their role for the reversibility of the hydrogenation/dehydrogenation reactions.     

Investigation of the influence of solute-solvent interactions on the vibrational energy relaxation dynamics of large molecules in liquids

The influence of solute-solvent interactions on the vibrational energy relaxation dynamics of perylene and substituted perylenes in the first singlet excited-state upon excitation with moderate (<0.4 eV) excess energy has been investigated by monitoring the early narrowing of their fluorescence spectrum. This narrowing was found to occur on timescales ranging from a few hundreds of femtoseconds to a few picoseconds. Other processes, such as a partial decay of the fluorescence anisotropy and the damping of a low-frequency oscillation due to the propagation of a vibrational wavepacket, were found to take place on a very similar time scale. No significant relationship between the strength of nonspecific solute-solvent interactions and the vibrational energy relaxation dynamics of the solutes could be evidenced. On the other hand, in alcohols the spectral narrowing is faster with a solute having H-bonding sites, indicating that this specific interaction tends to favor vibrational energy relaxation. No relationship between the dynamics of spectral narrowing and macroscopic solvent properties, such as the thermal diffusivity, could be found. On the other hand, a correlation between this narrowing dynamics and the number of low-frequency modes of the solvent molecules was evidenced. All these observations cannot be discussed with a model where vibrational energy relaxation occurs via two consecutive and dynamically well-separated steps, namely ultrafast intramolecular vibrational redistribution followed by slower vibrational cooling. On the contrary, the results indicate that both intra- and intermolecular vibrational energy redistribution processes are closely entangled and occur, at least partially, on similar timescales.