Bis(μ6‐cis‐2,4,6,8,10,12,14,16‐octa­methyl­cyclo­octa­siloxane‐2,4,6,8,10,12,14,16‐octolato)octa­kis[(dimethyl­formamide)copper(II)] dimethyl­formamide solvate enclosing a pyrazine mol­ecule

The title compound, [Cu₈(C₈H₂₄O₂Si)₂(C₃H₇NO)₈]·C₄H₄N₂·C₃H₇NO, features a sandwich‐like cage enclosing a pyrazine mol­ecule, both situated on a centre of inversion. In addition, the crystal structure contains one dimethyl­formamide mol­ecule which is disordered over a centre of inversion. The copper layer, containing eight atoms, is located between two siloxanolate fragments. The whole structure of Cu atoms and siloxanolate rings is distorted by the pyrazine mol­ecule, leading to an oval form. As a result, the angles between the Cu atoms differ at the copper layer. The difference in the angles could lead to some deviations in the Cu–Cu exchange inter­actions within the copper ring, which is of inter­est for mol­ecular magnetism.     

Development and Application of new C30-Modified TLC Plates

JPC – Journal of Planar Chromatography – Modern TLC - This paper reports the efficiency of the C30 phase for HPLC and TLC separation of a mixture of tocopherol homologs and...     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Adsorption thin-layer chromatography and viscometry of polystyrenes in solvent mixtures

The effect of the thermodynamic quality of solvent mixtures on the adsorption behavior of macromolecules under dynamic conditions was investigated. The chromatographic behavior of polystyrenes (PSs) in various mixed eluents was studied under conditions of adsorption and size-exclusion thin-layer chromatography as well as at the exclusion-adsorption transition point with silica gel KSKG adsorbent. The thermodynamic quality of the solvent mixtures used in the chromatographic experiments was determined viscometrically. The dependences of the intrinsic viscosity of PSs on solvent composition for solvent-non-solvent, two solvents, and theta-solvent-solvent mixtures were obtained. A correlation was found between Snyder's polarity indices for the solvent mixtures used in polymer chromatography under "critical conditions" and the intrinsic viscosity values of PSs in the same mixtures.     

Splitless on-line coupling of capillary high-performance liquid chromatography,capillary electrochromatography and pressurized capillary electrochromatography with nuclear magnetic resonance spectroscopy

A mixture of unsaturated fatty acid methyl esters was separated with a new splitless capillary set-up. With the employed apparatus configuration different capillary separation techniques such as capillary high-performance liquid chromatography (cHPLC), capillary electrochromatography (CEC) and pressurized capillary electrochromatography (pCEC) could be applied. The detection and identification of the sample compounds were accomplished by hyphenating these capillary separation techniques with nuclear magnetic resonance (NMR) spectroscopy using a novel configuration of the detection capillary set-up. Using modified electrokinetically driven separation techniques, the electric field was applied solely across the separation column. With this improved interface for capillary liquid chromatography-NMR on-line coupling, the stereochemical assignment of the cis and trans configuration of unsaturated fatty acids could be easily accomplished. Finally, the results of cHPLC-NMR, CEC-NMR and pCEC-NMR coupling experiments were compared.Dedicated to Professor Günter Häfelinger on the occasion of his 65th birthday     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.     

Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

Hybrid sol–gel silica adsorbent materials synthesized by molecular imprinting for tannin removal

Journal of Sol-Gel Science and Technology - This study reports the development of a functional adsorbent synthesized by the molecular imprinting method in a sol–gel matrix. The adsorption...