Trinuclear heterobimetallic complexes with binucleating dithioxamides: stereoselective synthesis and solution behavior involving Pd-N bond rupture

Bischelate platinum(II) complexes of the type [Pt(H-R(2)-N(2)C(2)S(2))(2)] (H-R(2)-N(2)C(2)S(2)(-) = dialkyl-dithioxamidate) are ditopic receptors which, after coordination of the first Pd(eta(3)-allyl)(+) moiety, induce the orientation of the second palladium-allyl fragment. Thus, a series of trimetallic complexes of formula bis-[(eta(3)-allyl)-palladium(II)](mu-bis-dialkyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been prepared in which the allyl fragments are oriented toward the same side of the molecular plane. We have also prepared the trimetallic complex using a dithioxamide obtained from the racemic phenylethylamine. Only two isomers were produced in equimolar ratio: the racemate that has four homochiral alkyl substituents and the mesoform containing the meso-dithioxamide that has homochiral substituents on the same side of molecular plane. Under the effect of the temperature, the trimetallic Pd-Pt-Pd complexes undergo rapid allyl isomerization; the mechanism of the isomerization, which is similar to that found by us in an analogue Pt-Pd bimetallic complex, is discussed. The crystal and molecular structure of bis-[(eta(3)-allyl)-palladium(II)](mu-bis-[S]-phenylethyl-dithioxamidate-platinum(II) kappa-S,S-kappa-S',S'-Pt-kappa-N,N-Pd-kappa-N',N'-Pd') has been reported.     

Atmospheric degradation of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol: OH kinetics and UV absorption cross sections

The absolute rate coefficients for the reactions of hydroxyl radical (OH) with 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)) were measured as a function of temperature (263-354 K) and pressure (41-193 Torr of He, Ar, and N(2)) by the pulsed laser photolysis/laser-induced fluorescence technique. This work represents the first absolute determination of k(1)(-)k(3) and their temperature dependence. No pressure dependence of the rate coefficients was observed in the range studied. Thus, k(i)(298 K) values (x10(-12) cm(3) molecule(-1) s(-1) with an uncertainty of +/-2sigma) were averaged over the pressure range studied yielding 8.77 +/- 1.46, 3.64 +/- 0.60, and 9.01 +/- 1.00 for 2-butanol (k(1)), 2-methyl-2-butanol (k(2)), and 2,3-dimethyl-2-butanol (k(3)), respectively. k(1) and k(3) exhibit a slightly negative temperature dependence over the temperature range studied. In contrast, the rate coefficient for the reaction of OH with 2-methyl-2-butanol (k(2)) did not show any temperature dependence. Some deviation of the conventional Arrhenius behavior was clearly observed for k(3). In this case, the best fit to our data was found to be described by the three-parameter expression k(T) = A + B exp(-C/T). The UV absorption cross sections of 2-butanol, 2-methyl-2-butanol, and 2,3-dimethyl-2-butanol have also been measured at room temperature between 208 and 230 nm. The values reported constitute the first determination of the UV cross sections of those alcohols. Our results are compared with previous studies, when possible, and are discussed in terms of the H-abstraction by OH radicals. The atmospheric implications of these reactions and the photochemistry of these alcohols are also discussed.     

A critical study on the determination of selenium in gallium arsenide by polarographic techniques

A simple voltammetric method is described for the determination of traces of selenium in gallium arsenide. Differential-pulse cathodic stripping voltammetry permits a direct determination of selenium without preliminary enrichment or separation processes. Selenium can be determined down to levels of 1–2 μg g^?1, with relative standard deviations of about 10%, in ? 100-mg samples of gallium arsenide. Results for gallium arsenide doped with 7–75 μg g^?1 selenium agree in most cases with those obtained by spectrophotometry based on 4-chloro-o-phenylenediamine.     

Luminescence Properties of Platinum(II) Dithiooxamide Compounds

Tight contact ion pairs of general formula {Pt(H(2)-R(2)-dto)(2)(2+),(X(-))(2)} have been prepared, and their absorption spectra and luminescence properties (at room temperature in dichloromethane fluid solution and at 77 K in butyronitrile rigid matrix) have been studied (dto = dithiooxamide; R = methyl, X = Cl (1); R = butyl, X = Cl (2); R = benzyl, X = Cl (3); R = cyclohexyl, X = Cl (4); R = cyclohexyl, X = Br (5); R = cyclohexyl, X = I (6)). The absorption spectra of all the compounds are dominated by moderately strong Pt(dpi)/S(p) to dithiooxamide (pi) charge transfer (Pt/S --> dto CT) bands in the visible region (epsilon in the 10(4)-10(5) M(-)(1) cm(-)(1) range). Absorption features are also present at higher energies, due to pi-pi transitions centered in the dto ligands (ligand centered, LC). All the compounds exhibit a unstructured luminescence band in fluid solution at room temperature, with the maximum centered in the 700-730 nm range. The luminescence bands are blue-shifted about 4000 cm(-)(1) on passing to the rigid matrix at 77 K. Luminescence lifetimes are on the 10(-)(8)-10(-)(7) s time scale at room temperature and 1 order of magnitude longer at 77 K. Luminescence is assigned to triplet Pt/S --> dto CT excited states in all cases. Compounds 3-6 also exhibit a second higher-energy luminescence band at room temperature, centered at about 610 nm, attributed to a LC excited state. Charge transfer interactions between halides and dto ligands destabilize dto-centered orbitals, affecting the energy of Pt/S --> dto CT transitions and states. The X counterions and X --> dto CT levels are proposed to play a role in promoting excited state conversion between LC and Pt/S --> dto CT levels. The R substituents on the nitrogen atoms of the dto ligands influence the absorption and photophysical properties of the compounds, by affecting proximity of the ion pairs. The possibility to functionalize the R substituents may open the way to interface these luminescent compounds with desired substrates and to construct supramolecular assemblies.     

Preparation of novel analgesics via diastereoselective nucleophilic addition to 1-dimethylamino-2-methylpentan-3-one

The diastereoselective synthesis of naphthyl amino alcohols via nucleophilic addition to racemic 1-dimethylamino-2-methylpentan-3-one was studied. The use of the appropriate experimental conditions allowed the synthesis of both diastereoisomers. The relative configurations were established via NOESY experiments.     

Recent advances in electrochemical water technologies for the treatment of antibiotics: A short review

This short review presents a critical overview of the most recent works published in the literature related to the use of electrochemical advanced oxidation processes (EAOPs) for the treatment of antibiotics present in synthetic and real wastewaters. The first section focuses on novelties within the traditional EAOPs, including electrochemical oxidation and electrochemical Fenton-based processes. The second section is devoted to new electrochemical technologies, including heterogeneous electro-Fenton, electrochemically activated persulfate processes, and combined processes. Future perspectives about these processes are also presented to aid the continuous evolution of research in the area.     

The differential pulse polarographic determination of chromium in gallium arsenide

The method described for the determination of chromium in gallium arsenide is based on the catalytic current produced by nitrate in the electrolytic reduction of the chromium(VI)-diethylenetriaminepentaacetate complex. Matrix effects, primarily caused by gallium, are discussed in detail. The method is suitable for determinations of chromium at levels as low as about 1 μg g^?1 with about 50 mg of sample; the r.s.d. is better than 10%.     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

The extracellular matrix is an important source of ultrasound backscatter from myocardium

Ultrasound tissue characterization with measurement of backscatter has been employed in numerous experimental and clinical studies of cardiac pathology, yet the cellular components responsible for scattering from cardiac tissues have not been unequivocally identified. This laboratory has proposed a mathematical model for myocardial backscatter that postulates the fibrous extracellular matrix (ECM) as a significant determinant of backscatter. To demonstrate the importance of ECM, this group sought to determine whether measurements of backscatter from the isolated ECM could reproduce the known directional dependence, or anisotropy of backscatter, from intact cardiac tissues in vitro. Segments of left ventricular free wall from ten formalin fixed porcine hearts were insonified at 50 MHz, traversing the heart wall from endo- to epicardium to measure the anisotropy of myocardial backscatter, defined as the difference between peak (perpendicular to fibers) and trough (parallel to fibers) backscatter amplitude. The tissue segments were then treated with 10% NaOH to dissolve all of the cellular components, leaving only the intact ECM. Scanning electron micrographs (SEM) were obtained of tissue sections to reveal complete digestion of the cellular elements. The dimensions of the residual voids resulting from cell digestion were approximately the diameter of the intact myocytes (10-30 microm). These samples were reinsonified after seven days of treatment to compare the anisotropy of integrated backscatter. The magnitude of anisotropy of backscatter changed from 15.4 +/- 0.8 to 12.6 +/- 1.1dB for intact as compared with digested specimens. Because digestion of the myocardium leaves only extracellular sources of ultrasonic scattering, and because the isolated ECM exhibits similar ultrasonic anisotropy as does the intact myocardium, it is concluded that there is a direct association between the ECM and the anisotropy of backscatter within intact tissue. Thus, it is suggested that ultrasonic tissue characterization represents a potentially clinically applicable method for delineating the structure and function of the ECM.     

Nonlinear wave propagation in constrained solids subjected to thermal loads

The classical mathematical treatment governing nonlinear wave propagation in solids relies on finite strain theory. In this scenario, a system of nonlinear partial differential equations can be derived to mathematically describe nonlinear phenomena such as acoustoelasticity (wave speed dependency on quasi-static stress), wave interaction, wave distortion, and higher-harmonic generation. The present work expands the topic of nonlinear wave propagation to the case of a constrained solid subjected to thermal loads. The origin of nonlinear effects in this case is explained on the basis of the anharmonicity of interatomic potentials, and the absorption of the potential energy corresponding to the (prevented) thermal expansion. Such “residual” energy is, at least, cubic as a function of strain, hence leading to a nonlinear wave equation and higher-harmonic generation. Closed-form solutions are given for the longitudinal wave speed and the second-harmonic nonlinear parameter as a function of interatomic potential parameters and temperature increase. The model predicts a decrease in longitudinal wave speed and a corresponding increase in nonlinear parameter with increasing temperature, as a result of the thermal stresses caused by the prevented thermal expansion of the solid. Experimental measurements of the ultrasonic nonlinear parameter on a steel block under constrained thermal expansion confirm this trend. These results suggest the potential of a nonlinear ultrasonic measurement to quantify thermal stresses from prevented thermal expansion. This knowledge can be extremely useful to prevent thermal buckling of various structures, such as continuous-welded rails in hot weather.