The oxidative cyclization of n-phenyl-3-methylthiopropylamines to form N-phenyl-s-methylisothiazolidinium salts

A series of N-phenyl-3-methylthiopropylamine hydrochlorides were prepared by reacting a series of anilines with methional and sodium cyanoborohydride. These were cyclized upon oxidation by N-chloro-succinimide to the corresponding N-phenyl-S-methylisothiazolidinium derivatives which were isolated as the tetraphenylborate salts. Compounds successfully prepared included the m-methyl, p-methyl, m-methoxy, and p-methoxyphenyl derivatives.     

Acid Exfoliation of Imine‐linked Covalent Organic Frameworks Enables Solution Processing into Crystalline Thin Films

Covalent organic frameworks (COFs) are highly modular porous crystalline polymers that are of interest for applications such as charge‐storage devices, nanofiltration membranes, and optoelectronic devices. COFs are typically synthesized as microcrystalline powders, which limits their performance in these applications, and their limited solubility precludes large‐scale processing into more useful morphologies and devices. We report a general, scalable method to exfoliate two‐dimensional imine‐linked COF powders by temporarily protonating their linkages. The resulting suspensions were cast into continuous crystalline COF films up to 10 cm in diameter, with thicknesses ranging from 50 nm to 20 μm depending on the suspension composition, concentration, and casting protocol. Furthermore, we demonstrate that the film fabrication process proceeds through a partial depolymerization/repolymerization mechanism, providing mechanically robust films that can be easily separated from their substrates.     

Oxidative Stabilization of Poly(norbornene) Polymers Prepared by Ring Opening Metathesis Polymerization

Polymers prepared by ring opening methathesis polymerization contain double bonds along the backbone and are susceptible to oxidation during high temperature processing or device operation. To overcome this, we report a simple method to improve the oxidative stability of ROMP based polymers by inclusion of a small percentage of monomer functionalized with a radical scavenger in the feedstock. The oxidation induction temperature was improved from 111°C up to 262°C when 8 mol% of the functionalized comonomer was included in the feedstock. Modest improvements in the thermal decomposition temperature were also observed.     

Nanostructure dependence of field-effect mobility in regioregular poly(3-hexylthiophene) thin film field effect transistors

Low polydispersity regioregular polythiophenes with number average molecular weights ranging from 2 to 13 kDa were cast under the same conditions from solution to form a series of field effect transistors (FETs). Tapping mode AFM and grazing incidence small-angle X-ray scattering revealed that in all cases the polymers formed regular nanofibrillar morphologies with the width of nanofibrils proportional to the weight average contour length of polymer chains, indicating that conjugated backbones were oriented perpendicular to the nanofibril axes. FET charge carrier mobilities exhibited exponential dependence on nanofibril width, pointing to the decisive role of extended conjugated pathways in charge transport.     

The synthesis and hydrolysis of N-benzyl-S-methylisothiazolidinium salts

A series of N-benzyl-S-methylisothiazolidinium salts were obtained by iodinic oxidation of the corresponding N-benzyl-3-methylthiopropylamines at neutral pH followed by their isolation as the chloride salts. The parent N-benzyl-3-methylthiopropylamines were prepared by reacting substituted benzaldehydes with 3-methylthiopropylamine and sodium cyanoborohydride. Acid hydrolysis of the isothiazolidinium salts resulted in their quantitative conversion to the corresponding N-benzyl-3-methylsulfenylpropylamines. Although methylsulfenylpropylamine formation also predominated in alkaline solution, a significant fraction was converted to the parent benzaldehyde and presumably, 3-methylthiopropylamine. The latter conversion is believed to involve opening of the isothiazolidine ring via an elimination reaction followed by hydrolysis of the resulting Schiff's base.     

A host-guest optical sensor for aliphatic amines based on lipophilic cyclodextrin

A host-guest optical sensor for the determination of aliphatic amines as exemplified by octylamine is proposed. It is based on the reversible fluorescence enhancement of heptakis(2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) hosting tetraphenylporphyrin (TPP) immobilized in poly(vinyl chloride) (PVC) membrane by aliphatic amine extracted from aqueous phase into membrane phase. The optimum membrane contained 1.15 wt % TPP, 6.15 wt % DOB-β-CD as sensing reagent and other membrane materials. The fluorescence enhancement of the membrane resulted from the formation of a stable three-component complex among DOB-β-CD, TPP, and aliphatic amines. With the optimum conditions described, the fluorescence response of the sensor to octylamine shows a good correlation with the theoretically derived equation in the range 1.0 × 10^–6 to 8.0 × 10^–4 mol/L. The response characteristics including reversibility, response time, reproducibility and lifetime and selectivity of this optical device are also discussed in detail. This sensor has also been applied for the determination of octylamine in water samples containing interferents with satisfactory recovery.     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Acid Exfoliation of Imine-linked Covalent Organic Frameworks Enables Solution Processing into Crystalline Thin Films

Covalent organic frameworks (COFs) are highly modular porous crystalline polymers that are of interest for applications such as charge-storage devices, nanofiltration membranes, and optoelectronic devices. COFs are typically synthesized as microcrystalline powders, which limits their performance in these applications, and their limited solubility precludes large-scale processing into more useful morphologies and devices. We report a general, scalable method to exfoliate two-dimensional imine-linked COF powders by temporarily protonating their linkages. The resulting suspensions were cast into continuous crystalline COF films up to 10 cm in diameter, with thicknesses ranging from 50 nm to 20 μm depending on the suspension composition, concentration, and casting protocol. Furthermore, we demonstrate that the film fabrication process proceeds through a partial depolymerization/repolymerization mechanism, providing mechanically robust films that can be easily separated from their substrates.     

Methods for removal of residual catalyst from polymers prepared by ring opening metathesis polymerization

Methods for removing the residual Grubbs' third generation catalyst from polymers prepared by ring opening metathesis polymerization are reported. Two strategies were investigated for reduction of the residual catalyst in the final polymer product. The first strategy involved the use of heterogeneous functionalized particles to scavenge the catalyst from the solution. Filtration of the particles followed by precipitation produced polymers with 10–60 ppm residual catalyst, depending on the type of particle used, surface functional groups, and number of equivalents. The second strategy used small organic molecules that could coordinate to the metal species and modify the solubility of the catalyst, facilitating partitioning of the catalyst into the precipitation solvent. Several types of molecules with varied functionality reduced the residual catalyst level to 30–120 ppm, depending on the loading. Hydrogenation of the polymer backbone followed by precipitation lowered the residual Ru content from 195 ppm to 10 ppm, suggesting that the difficulty of completely removing the catalyst could be a result of coordination of the metal species to the double bonds in the polymer backbone. Reducing the amount of trace catalyst significantly improved the oxidative stability of the polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ebselen and congeners inhibit NADPH oxidase 2-dependent superoxide generation by interrupting the binding of regulatory subunits

NADPH oxidases (Nox) are a primary source of reactive oxygen species (ROS), which function in normal physiology and, when overproduced, in pathophysiology. Recent studies using mice deficient in Nox2 identify this isoform as a novel target against Nox2-implicated inflammatory diseases. Nox2 activation depends on the binding of the proline-rich domain of its heterodimeric partner p22phox to p47phox. A high-throughput screen that monitored this interaction via fluorescence polarization identified ebselen and several of its analogs as inhibitors. Medicinal chemistry was performed to explore structure-activity relationships and to optimize potency. Ebselen and analogs potently inhibited Nox1 and Nox2 activity but were less effective against other isoforms. Ebselen also blocked translocation of p47phox to neutrophil membranes. Thus, ebselen and its analogs represent a class of compounds that inhibit ROS generation by interrupting the assembly of Nox2-activating regulatory subunits.