木质素在塑料中的应用

总结了国内外近10年来木质素在塑料中的应用进展，重点对木质素在PVC、PP、PE、PF、PU等5个方面的研究成果进行了系统阐述，并对该技术的发展方向进行了分析预测。     

Expansion of monomer units in poly(ethylene terephthalate) molecules under conditions of thermal and zero-point atomic vibrations

The temperature dependence of the expansion ?_C of trans conformers of the carbon skeleton of macromolecules in crystallized and amorphous poly(ethylene terephthalate) (PET) due to zero-point and thermal atomic vibrations is investigated by IR spectroscopy. It is found that the thermal expansion coefficient β_C jumpwise increases at the characteristic temperatures T _t and T _b. This increase is associated with the crossover from the quantum to classical statistics of torsional and bending vibration modes. The quantum and classical contributions to the expansion ?_C are determined for each mode. The quantum and classical contributions of the torsional vibrational mode in the amorphous polymer are approximately 1.5 times larger than those in the crystallized polymer. This effect is caused by an increase in the anharmonicity of torsional vibrations in the amorphous polymer.     

Spectra of second-order Raman scattering in porous silicon

Spectra of second-order Raman scattering in porous silicon are investigated. A band shift towards lower energies in second-order spectra is observed, as well as the correlation between the values of band shift in first-and second-order spectra. It is demonstrated that the observed effect cannot be interpreted using the conventional concepts of the mechanisms of scattering in microcrystalline samples. An interpretation of the revealed effect is suggested.     

理想微裂纹系统中的随机扩展效应

本文讨论了在理想微裂纹系统中,由于微裂纹的随机性扩展,对微裂纹统计演化产生的效应。文中提供了一般的理论框架,给出了便于处理的转移概率的表达式。最后,用数值计算的例子展示了随机模型的统计演化特征,并比较了与确定性扩展模型下统计演化的异同。     

陆生植物黑麦草(Lolium multiflorum)对富营养化水体修复的围隔实验研究——氨氮的净化效应及其动态过程

采用浮床黑麦草（Lolium multi florum）对畜禽养殖富营养水体氨氮的净化效应及动态过程进行了研究．结果表明：浮床黑麦草对富营养水体中的氨氮具有明显的净化效果．当覆盖率30％时，对氨氮的去除率最高可达到95．89％．对其去除水体氨氮的动态过程拟合表明符合三次方程曲线．该研究为冬季陆生植物修复富营养水体提供重要依据．     

Magnetic properties of HITPERM-type alloys at high temperature

(Fe,Co)–Zr,Hf)–Cu–B (HITPERM-type) alloys with variable Hf, Zr and Co content were isothermally crystallised at 500–650 °C for 1 h, and the optimum nanocrystallisation temperature was selected on the basis of the minimum coercive field at room temperature. The quasistatic hysteresis loops were measured at temperature from 20 to 650 °C. Subsequently, the optimally annealed alloys were subjected to long-term annealing at 500, 550 and 600 °C. Working temperature of 600°C is too high for the investigated alloys to maintain stable magnetic properties. Temperature of 550 or 500 °C permits the material to be magnetically stable for a long period. The magnetic hysteresis loops recorded for the nanocrystalline alloys, where Fe:Co ratio is close to 1 and refractory metals content is 7 at.%, prove that coercive field increases slightly with temperature, but remains in the range of 20–40 A/m (depending on the alloy composition) from 20 to 550 °C. This proves that the investigated alloys, after optimisation of chemical composition, may be suitable for high temperature use.     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

Effect of Molecular Weight on Liquid Crystal Photoalignment by Photosensitive Polyester Containing Thrifluoromethyl Moieties

We investigate the liquid-crystal （LC） alignment direction on photoalignment films formed from photosensitive polyester containing thrifluoromethyl moieties （PPDA） with various molecular weights by crossed polarized optical microscopy. It is found that LC alignment behaviour changes with molecular weight of PPDA. The LC alignment on PPDA irradiated films with the highest molecular weight is homogeneous, while those with low and intermediate molecular weights are homeotropic. However, surface morphologies show weak dependence on molecular weight. The surfaces are smooth and there is no clear morphological anisotropy on these aligned films observed by an atomic force microscope. The surface energies of the irradiated films are also measured by using an indirect contact-angle method where both surface energy and its polar component, increase with increasing molecular weight. Different polar surface energies can be considered as a main reason for different alignment characteristics.     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.