2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

Morita Equivalent 3-Blocks of the 3-Dimensional Projective Special Linear Groups

If G is a projective special linear group PSL(3,q) with q 4or 7 (mod 9), then a Sylow 3-subgroup of G is elementary abelianof order 9. We show that the principal 3-blocks of any two suchgroups are Morita equivalent. This result and Okuyama's theoremfor PSL(3,4) prove the Broué conjecture for these blocks.1991 Mathematics Subject Classification: 20C05, 20C20.     

Increase in dynamic modulus of nylon 6 fiber in repeated heating and cooling cycles under sinusoidal deformation

The repeated heating and cooling cycles under sinusoidal deformation have been investigated on nylon 6 fibers. The fibers zone-drawn twice at high temperatures were used, which have a crystallinity of 52.2% and a birefringence of 59.4×10^?3. The heating and cooling cycle was performed twice at a frequency of 110 Hz over a temperature range from 0°C to 180°C and 190°C. The crystallinity and birefringence of the treated fiber were 51.7% and 60.7×10^?3, respectively, indicating almost no changes in molecular orientation and crystallinity. However, the dynamic modulus, E′, increased steadily over whole temperature range measured. Finally, the E′ value reached 21 GPa at room temperature and 10 GPa ever at 180°C. The elongation of fiber after two cycles was only about 5%. © 1993 John Wiley & Sons, Inc.     

Trivial source modules in blocks with cyclic defect groups

We shall present a method to get trivial source modules easily just by looking at values of ordinary characters at non-identity p-elements in finite groups instead of doing huge calculation. The method is only for a case where defect groups are cyclic. Nevertheless, it works well at least when we want to prove Broué’s abelian defect group conjecture for blocks which have elementary abelian defect groups of order p ².     

Neocrocin A: a novel crocetin glycoside with a unique system for binding sugars isolated from gardenia yellow

A novel crocetin glycosyl ester, neocrocin A (2), was isolated from gardenia yellow. The structure of 2 was elucidated as that of an all-trans-crocetin beta-D-gentiobiosyl beta-D-glucopyranosyl-(1-->6)-D-2-deoxy-glucopyranos-2-yl diester based on chemical and spectral data. The findings provide evidence that the binding system of crocetin glycosides is not limited to the anomeric position.     

Application of continuous zone-drawing/zone-annealing method to poly(ethylene terephthalate) fibers

A continuous zone-drawing/zone-annealing method was applied to poly(ethylene terephthalate) fibers in order to improve their mechanical properties. Apparatus used for this treatment was assembled in our laboratory. The continuous zone-drawing treatment was carried out at a drawing temperature of 103°C under an applied tension of 6.6 MPa to fully orient amorphous chains in the drawing direction without inducing thermal crystallization. The continuous zone-annealing treatment was carried out twice at an annealing temperature of 160°C under 102.2 MPa and at 183°C under 161.1 MPa to crystallize the highly oriented amorphous chains. The fiber was continuously drawn and annealed at a rate of 420 mm/min. The fiber obtained had a birefringence of 0.260, a degree of crystallinity of 55%, a tensile modulus of 18 GPa, and a storage modulus of 21 GPa at 25°C. Despite the large difference in the treating speed between the continuous zone-annealing and zone-annealing, their values are approximately equal to those of the zone-annealed PET fiber that was reported previously. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 473–481, 1998     

Theoretical study of sorption-induced bending of polypyrrole films

Polypyrrole films containing perchlorate were electrochemically synthesized and the bending and recovery motion of the films obtained has been investigated. It was found that the thickness of the film and ambient relative humidity (RH) were crucial to the motion of film: An increase of the film thickness decreased the displacement of the bending but increased the bending stress. On the other hand, an increase of the ambient RH decreased both functions. The motion of film was caused by the difference of expansion on both sides of the film owing to anisotropic sorption of water vapor, which could be expressed by the diffusion-limited bending model. The diffusion coefficients calculated from the bending and recovery motion at 25°C, RH 50% were 12.2 × 10⁻⁸ cm² s⁻¹ and 3.5 × 10⁻⁸ cm² s⁻¹, respectively. The maximum expansion of the film surface calculated from the bending curve was about 0.36%. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2237–2246, 1998     

Direct numerical simulation of elastic turbulence and its mixing-enhancement effect in a straight channel flow

In this paper,we present a direct numerical simulation(DNS) of elastic turbulence of viscoelastic fluid at vanishingly low Reynolds number(Re = 1) in a three-dimensional straight channel flow for the first time,using the Giesekus constitutive model for the fluid.In order to generate and maintain the turbulent fluid motion in the straight channel,a sinusoidal force term is added to the momentum equation,and then the elastic turbulence is numerically realized with an initialized chaotic velocity field and a stretched conformation field.Statistical and structural characteristics of the elastic turbulence therein are analyzed based on the detailed information obtained from the DNS.The fluid mixing enhancement effect of elastic turbulence is also demonstrated for the potential applications of this phenomenon.