An enrichment method of molybdenum on a cellulose nitrate resin for the determination by electrothermal atomic absorption spectrometry coupled with the resin suspension injection.

Cellulose derivative resin (CDR) suspensions containing resin particles of cellulose nitrate (CDR(CN)), cellulose acetate (CDR(CA)), or cellulose triacetate (CDR(CTA)) were prepared as the sorbent for resin suspension injection (RSI) electrothermal atomic absorption spectrometry (ETAAS), in which fine resin particles holding a desired trace element were directly injected into the graphite tube as the suspension. To compare the sorption ability, the distribution ratios of the Mo(VI)-phenylfluorone complex were measured between the aqueous phase and the sorbents, including the CDRs mentioned above and the finely divided anion exchange resin (AR). The results showed that the sorption ability decreases in the following order: CDR(CN) > or = AR > CDR(CA) > or = CDR(CTA). It was concluded that CDR(CN) was able to extract more than 98% of Mo(VI), and was suitable for RSI-ETAAS as well as AR. CDR(CN) was used for the determination of Mo in NIES certified reference materials, No. 10 Rice flour-unpolished; the results showed fairly good agreements between the analytical values and the certified values.     

Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

Thickness decrease of a grafted polyelectrolyte membrane exposed to shear flow

The effect of the shear flow on the thickness change of a polyelectrolyte membrane grafted onto a glass substrate was directly investigated with a flow cell combined with a confocal laser scanning microscope. The membrane thickness decreased proportionally to an increase in the shear stress of the flow when the shear rate exceeded a critical value of 1 s^?1. The higher the ionic strength was of the fluid, the greater the thinning effect was. The correlation between the critical shear rate and the relaxation of the polymer in the gel membrane was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2808–2815, 2003     

The surface activity of the lower homologues of n-alkylammonium chlorides in aqueous solutions. Effect of hydrophobic hydration

Summary The surface tensions of aqueous solutions ofn-alkylammonium chlorides (methyl to hexyl) have been measured at 25 °C. With methylammonium chloride the surface tension increased with concentration, whereas with ethylammonium chloride and higher homologues, the surface tension decreased with concentration. The results suggest that this transition is attributed to the effect of hydrophobic hydration. For propylammonium chloride and higher homologues, the relation between the surface tension lowering da and the concentrationC in the range of 0–10 dyne/cm, can be expressed by the equation; = AC + BC, whereA andB are constants. The surface tension coefficientB has been found to increase approximately twofold for each additional CH₂ group of alkyl chain.

---

Zusammenfassung Es wurden die Oberflächenspannungen wäßriger Lösungen vonn-Alkylammoniumchloriden (Methyl- bis Hexylammoniumchloride) bei 25 °C gemessen. Für Methylammoniumchlorid nimmt die Oberflächenspannung mit der Konzentration zu, aber bei allen höheren Homologen mit der Konzentration ab. Die Ergebnisse deuten darauf hin, daß dieser Übergang durch die hydrophobe Hydration bedingt wird. Für Propylammonium-chlorid und die höheren Homologen wird die Beziehung zwischen der Erniedrigung der Oberflächenspannung und der KonzentrationC in dem Bereich von 1 bis 10 dyn/cm durch die folgende Gleichung ausgedrückt: = AC + BC (A undB sind Konstanten). Es wurde gefunden, daß B für jede zusätzliche CH₂-Gruppe etwa um den Faktor 2 größer wird.

     

Dielectric relaxation in the paracrystalline phase in polyacrylonitrile

Thermal expansion and dielectric relaxation of polyacrylonitrile were measured in the temperature range from ?75 to 152°C. at frequencies from 30 cps to 3 Mc./sec. The thermal expansion curve and the temperature dependence of logarithmic relaxation time both show an inflection at 85°C. An x-ray study by Bohn reveals that this inflection comes from the thermal expansion of the paracrystalline phase of this polymer, and consequently the transition at 85°C. and the associated relaxation are ascribed to molecular motion in the paracrystalline phase. The relaxation strength increases with increasing temperature above this point. The transition is caused by freezing of the bending vibration of chains whereas the relaxation results from rotational vibration. The length of segments in this phase is roughly estimated to be ca. 100 A. by comparing the observed relaxation strength with the theory developed on the basis of the above considerations.     

Resolving multiple overlapping calorimetric transitions by use of a microcomputer: studies on erythrocyte membranes

Buffer changes and certain drugs cause temperature shifts, amplitude changes, and transition broadening in the differential scanning calorimetric (DSC) analysis of erythrocyte membranes. However, it has been difficult to interpret and quantitate these shifts and changes because the scans are composed of multiple overlapping transitions and because more than one transition may be simultaneously affected. An empirical approach has been developed by using Gaussian modeling to resolve these calorimetric transitions. Data analysis was carried out on a microcomputer using a nonlinear regression program (PCNONLIN) to fit the data scans. These results show that changes in the calorimetric scans of erythrocyte membranes due to alterations in the buffer environment, such as pH and osmolarity, can be resolved by fitting the data scans with the proposed mathematical model and optimizing the resolution parameters with PCNONLIN. In addition, resolution uncovered hidden characteristics that may not have been readily evident. Under certain conditions, for example, apparent transition shifts were shown to actually be amplitude changes and transition broadening. Determination of the limitations and validity of this method was accomplished with simulation studies. This technique offers a simple means for fitting overlapping DSC transitions by use of a commercially available nonlinear regression program that can be run on a microcomputer.     

1,1-bis(trimethylsilyl)-1-alkanols as silylcarbene equivalent

Silylcarbenes are generated by the pyrolysis of 1,1-bis(trimethylsilyl)-1-alkanols with elimination of trimethylsilanol.     

Computer simulation for the cooligomerization system

In order to clarify the kinetic features of the styrene (A)–methyl methacrylate (B)–CCl₄(S) cooligomerization system, a computer simulation was carried out. The experimental data on the degree of polymerization and the deviation of the cooligomer composition from the statistical steady-state composition were comparatively well explained by calculations based on the kinetic equations derived from the assumed reaction scheme and the values of the velocity coefficients, although the values of the four velocity coefficients in the initiation step and the velocity coefficient of the termination by the coupling of two solvent radicals were estimated. The results of the calculation of the rate of each component reaction show that the following two reactions are the most important in the initiation and in the transfer and termination steps when the [S]/([A] + [B]) ratio is large: where, A, A*, and P are styrene, polystyryl radical, and the cooligomer, respectively. Moreover, it was concluded that the deviation of the cooligomer composition from the statistical steady-state composition was caused by these two reactions.