Practical asymmetric synthesis of (S)-MA20565, a wide-spectrum agricultural fungicide

A practical asymmetric synthesis of a wide-spectrum agricultural fungicide, (S)-MA20565 (1), is described. The convergent synthesis was achieved starting from commercially available 3-(trifluoromethyl)aniline (7) in 44% overall yield through five steps and 2-bromobenzaldehyde (9) in 48% overall yield through four steps, respectively. (S)-O-[1-(3-Trifluoromethylphenyl)ethyl]hydroxylamine (2), a key intermediate of 1, was prepared via ruthenium(II)-catalyzed asymmetric transfer hydrogenation of 1-(3-trifluoromethylphenyl)ethanone (6) followed by chlorination using methanesulfonyl chloride and oxyamination using potassium acetohydroxamate with high level of stereocontrol.     

Measurement of attachment force of microbial cells

A parallel-plate flow chamber consisting of two transparent electro-conductive glass plates was constructed. The two glass plates were set parallel to each other and connected to a potentiostat apparatus to regulate the strength of the electric field between the plates. A microbial cell suspension was flowed through the chamber. This system enabled the application of an electrostatic force to suspend charged particles, e.g. microbial cells, existing between the two plates. The time course of the cell attachment of Pseudomonas syringae pv. atropurpurea NIAES 1309 suspended in 10 mM phosphate buffer solution (pH 7.0) to the glass plate was investigated at various electric field strengths ranging from −4.2 to +4.1 V cm⁻¹. The attachment rate and the maximum number of attached cells increased linearly with the increase in the strength of the positive electric field. In contrast, the rate and the number of cells decreased linearly with the decrease in the strength of the negative electric field. These linear relations gave a specific value for the strength of the electric field (−5.9 ± 0.7 V cm⁻¹) where the electrostatic repulsion and the microbial attachment force were thought to be equal, resulting in no cell attachment. From this value, the electrostatic repulsion, i.e. the microbial attachment force, was calculated to be 5.0 × 10⁻¹¹ N cell⁻¹ for cells of average size.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

Identification of beta-decay of150La

The -decay of¹⁵⁰La, the heaviest isotope of lanthanum, has been identified by observing -rays from mass separated activities obtained at KUR-ISOL. From the decay curves of 97.0 and 208.7 keV -rays in¹⁵⁰Ce and of Ce-K X-ray, the half-life of¹⁵⁰La has been determined as 0.51(3) s. This value is in agreement with theoretical predictions from microscopic theory.     

Generation of 6-(Trifluoromethyl)-4,5-dihydro-2(3H)-pyridone and the Application to Synthesis of Some Fused Nitrogen Heterocycles Carrying a Trifluoromethyl Group on the Bridgehead Position via Radical Cyclization of Dihydropyridones

Staudinger/aza-Wittig reaction of 6,6,6-trifluoro-5-oxohexanoyl azide with PPh(3) or PBu(3) was examined. A reactive intermediate acyl imine 1 was trapped by methanol. Without nucleophile, isomerized enamide form 3 was obtained. N-Iodobenzoylation and N-haloalkylation of 3 and following radical cyclization via the 5-exo or 6-exo mode gave benzoindolizidinone, indolizidinone, and quinolizidinone derivatives 10-14, which have a trifluoromethyl group at the bridgehead position adjacent to nitrogen. Although LiAlH(4) reduction of 10 and 11 gave a mixture of saturated benzoindolizidine 15 and amino alcohol 16, reduction with BH(3)/THF selectively gave the desired 15 and indolizidine 17 from 13.     

Formal catalytic asymmetric total synthesis of fostriecin

The common synthetic intermediate of a potent and promising anticancer agent, fostriecin, was synthesized using a unique method that combines four catalytic asymmetric reactions as shown above.