Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Crystallization of Arthrobacter sp. strain 1C N-(1-D-carboxyethyl)-L-norvaline dehydrogenase and its complex with NAD+

The novel NAD+-linked opine dehydrogenase from a soil isolate Arthrobacter sp. strain 1C belongs to an enzyme superfamily whose members exhibit quite diverse substrate specificites. Crystals of this opine dehydrogenase, obtained in the presence or absence of co-factor and substrates, have been shown to diffract to beyond 1.8 ? resolution. X-ray precession photographs have established that the crystals belong to space group P21212, with cell parameters a = 104.9, b = 80.0, c = 45.5 ? and a single subunit in the asymmetric unit. The elucidation of the three-dimensional structure of this enzyme will provide a structural framework for this novel class of dehydrogenases to enable a comparison to be made with other enzyme families and also as the basis for mutagenesis experiments directed towards the production of natural and synthetic opine-type compounds containing two chiral centres.     

New Chiral Kemp's Acid Diamides for Chiral Amine Recognition by 1 H NMR

Two Kemp's acid diamides were synthesized and applied to chiral amine recognition using ¹H NMR analysis. One derivative based on 1-(1-naphthyl)ethylamine had good chiral recognition of six amines and was useful to determine the optical purity for three amines, i.e., methylbenzylamine, 1-(1-naphthyl)ethylamine and 1- henylpropylamine,however, the cyclohexylethylamine derivative showed little discrimination for the amines studied. Together with the results for alkylamines, it was shown that aromatic structure was important for aromatic shielding anisotropy and –– interactions between host and guest. The structure of the 1-(1-naphthyl)ethylamine derivative in solution was also considered based on ¹H NMR data and computer simulation.     

Application of intramolecular 1,3-dipolar cyclic addition of azide and olefin; construction of (pyrrolidine-2-ylidene)glycinate and glycinamides

Oxopropyl E-(pyrrolidine-2-ylidene)glycinamide (5c) and allyl E-(pyrrolidine-2-ylidene)glycinate (5d) were effectively synthesized from 2,3,5-tri-O-benzyl-4-O-tert-butyldimethylsilyl(TBDMS)-D-arabinal (7) using intramolecular 1,3-dipolar cyclic reaction of azide and olefin as a key reaction. These results proved this cyclic reaction should be applicable for the synthesis of various (pyrrolidine-2-ylidene)glycinate and glycinamide. In addition, the development of a synthetic route for the precursor of an unsaturated cyclic dehydro amino acid involved in azinomycins (carzinophilin) using relating glycinate, methyl E-(pyrrolidine-2-ylidene)glycinate (5a) was described.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Total synthesis of the antiviral marine natural product (-)-hennoxazole A

[structure:see text] The marine natural product hennoxazole A was synthesized by a convergent approach. The diastereoselective Mukaiyama aldol reaction with beta-alkoxy aldehyde was used to construct the tetrahydropyran segment, and the preparation of the nonconjugated triene moiety was accomplished via S(N)2 displacement of allylic bromide with vinyllithium and Takai's iodoolefination followed by palladium-catalyzed cross coupling with MeMgBr. The final steps involve an amide coupling using DEPC and oxazole synthesis via a oxidation/cyclodehydration process.     

Organotrichlorogermane synthesis by the reaction of elemental germanium, tetrachlorogermane and organic chloride via dichlorogermylene intermediate

Organotrichlorogermanes were synthesized by the reaction of elemental germanium, tetrachlorogermane and organic chlorides, methyl, propyl, isopropyl and allyl chlorides. Dichlorogermylene formed by the reaction of elemental germanium with tetrachlorogermane was the reaction intermediate, which was inserted into the carbon-chlorine bond of the organic chloride to give organotrichlorogermane. When isopropyl or allyl chloride was used as an organic chloride, organotrichlorogermane was formed also in the absence of tetrachlorogermane. These chlorides were converted to hydrogen chloride, which subsequently reacted with elemental germanium to give the dichlorogermylene intermediate. The reaction of elemental germanium, tetrachlorogermane and organic chlorides provides a simple and easy method for synthesizing organotrichlorogermanes, and all the raw materials are easily available.     

Silica sol-gel/organic hybrid material for protein encapsulated column of capillary electrochromatography

A new-type of sol-gel/organic hybrid composite material using gelatin or chitosan with tetramethoxysilane was developed for the bovine serum albumin (BSA)-encapsulated monolithic column for capillary electrochromatography (CEC). The composite monolith was used to immobilize BSA in a fused-silica capillary. The addition of gelatin and chitosan to the alkoxysilane enabled the enantioseparation of Trp. A very small amount of these polymers were effective for the enantioseparation. Especially, the monolithic column prepared from chitosan with tetramethoxysilane showed a high enantioselectivity for Trp enantiomers and the value (alpha' = t2/t1, t1: fast eluted enantiomer, t2: second eluted enantiomer) reached 1.15 on CEC mode. Furthermore, the composite materials exhibited a higher stability compared to the silica sol-gel column. These results showed that the sol-gel/organic hybrid composite was useful as a monolithic matrix for the BSA-encapsulated column for CEC.