The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

Reversed phase partition chromatographic separation of divalent copper with N-n-octylaniline on silica gel

A novel separation method was developed for the extraction and chromatographic separation of copper(II). The quantative extraction of 25.0–125.0 μg copper(II) has been observed from 0.05 to 0.25 mol/L of ascorbic acid at pH 9.0–12.0 with 0.087 mol/L N-n-octylaniline (liquid anion exchanger) coated on silica gel at a flow rate of 1.0 ml/min. The extracted metal ion has been recovered by eluting with 25.0 ml of 1.0 mol/L hydrochloric acid and determined spectrophotometrically by rubeanic acid method. The various influencing parameters viz. acid concentrations, reagent concentration, eluates effect of pH, and effect of flow rate on extraction were studied. The method is free from large number of interferences from cations and anions. A scheme for mutual separation of copper(II), gold(III) and bismuth(III) has been developed. Copper(II) has been separated from ayurvedic (Herbal) medicine and synthetic mixtures corresponding to alloy. The log–log plot of N-n-octylaniline concentration versus the distribution coefficient indicates that the probable extracted species is [.     

Effect of β-cyclodextrin complexation on physicochemical properties of zaleplon

The physicochemical properties and dissolution profile of zaleplon (ZPN) β-cyclodextrin (βCD) inclusion complex were investigated. The phase solubility profile of ZPN with β-cyclodextrin was classified as A_L-type. Stability constant with 1:1 molar ratio was calculated from the phase solubility diagram and the aqueous solubility of ZPN was found to be enhanced by 714% (p < 0.001) for β-cyclodextrin. Binary systems of ZPN with βCD were prepared by kneading method. The solid-state properties of complex were characterized by differential scanning calorimetry, Fourier transformation-infrared spectroscopy and powder X-ray diffractometry. It could be concluded that ZPN could form inclusion complex with β-cyclodextrin. The dissolution profile of inclusion complex was determined and compared with those of ZPN alone and its physical mixture. The dissolution rate of ZPN was significantly increased by complexation with βCD, as compared with pure drug and physical mixture.     

Extractive photometric determination of gold(III) with 1-(2',4',6'-trichlorophenyl)-4,4,6-trimethyl-(1H,4H)-2-pyrimidinethiol in presence of tri-iso-octylamine

Tervalent gold was determined spectrophotometrically as its anionic 1:4 gold-thiol complex extracted into chloroform from aqueous acidic medium (1.5M sulphuric acid) in the presence of tri-iso-octylamine. The complex exhibits maximum absorption at 480 nm (molar absorptivity 4.60 x 10(3) l.mole(-1).cm(-1)) and Beer's law is obeyed in the concentration range 5-50 microg of gold(III) per ml. The relative standard deviation and relative error, calculated from ten determinations of solutions containing 15 microg of gold(III) per ml were 1.0% and 0.8%. The method is simple, selective and reproducible. It permits separation of gold(III) from associated elements and its determination in synthetic mixtures.     

Quantification of Quetiapine in Human Plasma by LC–MS–MS

A rapid liquid chromatographic method with electrospray ionization tandem mass spectrometric detection has been developed and validated for quantification of quetiapine in heparinized human plasma. Plasma samples, without a drying and reconstitution step, were extracted by solid-phase extraction and eluted with acetonitrile. The analyte and zolpidem tartrate (internal standard, IS) were chromatographed on a C₁₈ column; the mobile phase was 85:15 (v/v) acetonitrile–5 mM ammonium formate, pH adjusted to 4.5 with formic acid, at a flow rate of 0.5 mL min⁻¹. The retention times of quetiapine and the IS were 1.25 and 1.05 min, respectively, and the run time was 1.8 min per sample. Selected reaction monitoring of MH⁺ at m/z 384.12 and 308.11 resulted in stable fragment ions with m/z 253.02 and 235.09 for quetiapine and the IS, respectively. Response was a linear function of concentration in the range 1.0–240.0 ng mL⁻¹, with r ≥ 0.9994. Recovery of quetiapine and the IS ranged from 74.82 to 85.57%. The assay has excellent characteristics and has been successfully used for analysis of quetiapine in healthy human subjects in a bioequivalence study.

     

Reversed phase extraction chromatographic separation of ruthenium(III)

A new an innovative separation method has been developed using N-n-octylaniline (liquid anion exchanger) coated on silica gel. Ruthenium(III) has been extracted quantitatively from 0.05 M hydrochloric acid, striped with aqueous solution of various acids and then determined by spectrophotometric method. Mutual separation scheme for ruthenium(III), iridium(III) and osmium(VIII) has been developed. Ruthenium(III) has been separated from commonly associated elements. Different parameter are studied viz effect of acid concentration, reagent concentration, striping agent, flow rate, foreign ion and synthetic mixture corresponding to alloys. Validity of method has been verified by separation of ruthenium(III) from fissium alloy.     

Self-chemical ionization of diethylzinc

The self-chemical ionization of diethylzinc is examined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry and semiempirical molecular orbital calculations. Electron impact of diethylzinc neutral produces the radical cation, C(4)H(15)Zn(+) (m/z x 122), which reacts further with the neutral (C(2)H(5))(2)Zn to give the following product ions: Zn(+) (m/z x 64), C(2)H(5)Zn(+) (m/z x 93), C(4)H(9)Zn(+) (m/z x 121), C(4)H(11)Zn(2)(+) (m/z x 187), and C(6)H(15)Zn(2)(+) (m/z x 215). To determine the structure and pathways for production of these ions, monoisotopic (12)C(4)H(15)(64)Zn(+), (64)Zn(+) and (12)C(2)H(5)(64)Zn(+) were individually isolated and reacted with the neutral background. We also performed semiempirical molecular orbital calculations (ZINDO/1). The molecular orbital calculations and experimental data are consistent in predicting that the ethyl group on the diethylzinc cation carries the positive charge. Copyright 1999 John Wiley & Sons, Ltd.     

Separation of gallium, indium and thallium by extraction with n-octylaniline in chloroform

Extraction of gallium(III), indium(III) and thallium(III) with n-octylaniline in chloroform at various concentrations of hydrogen halide acids (HCl, HBr, HI) has been studied and a scheme for their separation proposed. The procedure can be successfully applied to the separation and determination of gallium in presence of mercury, bismuth, manganese, zinc and lead; indium in presence of bismuth, antimony, lead, mercury, cadmium and zinc; and thallium in presence of mercury, cadmium, manganese, aluminium, tin and antimony. The advantage of the method is that the reagent can be recovered for reuse. The method is simple, rapid, and effects clear-cut separation.