All Non-Carbon B3NO2 Exotic Heterocycles: Synthesis,Dynamics, and Catalysis

The B₃NO₂ six-membered heterocycle (1,3-dioxa-5-aza-2,4,6-triborinane=DATB), comprising three different non-carbon period 2 elements, has been recently demonstrated to be a powerful catalyst for dehydrative condensation of carboxylic acids and amines. The tedious synthesis of DATB, however, has significantly diminished its utility as a catalyst, and thus the inherent chemical properties of the ring system have remained virtually unexplored. Here, a general and facile synthetic strategy that harnesses a pyrimidine-containing scaffold for the reliable installation of boron atoms is disclosed, giving rise to a series of Pym-DATBs from inexpensive materials in a modular fashion. The identification of a soluble Pym-DATB derivative allowed for the investigation of the dynamic nature of the B₃NO₂ ring system, revealing differential ring-closing and -opening behaviors depending on the medium. Readily accessible Pym-DATBs proved their utility as efficient catalysts for dehydrative amidation with broad substrate scope and functional-group tolerance, offering a general and practical catalytic alternative to reagent-driven amidation.     

Asymmetric reduction of 2-substituted 2-butenolides with reductase from Marchantia polymorpha

A p68 reductase participating in the asymmetric reduction of the C–C double bond of 2-substituted 2-butenolides was isolated from Marchantia polymorpha. The enzyme reduced 2-substituted 2-butenolides to give (R)-butanolides, and the reduction of citraconic anhydride afforded (R)-methylsuccinic anhydride.     

Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Strained silacycle-catalyzed asymmetric Diels-Alder cycloadditions: the first highly enantioselective silicon Lewis acid catalyst

The first highly enantioselective silicon Lewis acid catalyst for an asymmetric organic transformation has been developed. The catalyst derives its activity from the strain induced in the silicon center by virtue of being constrained in a five-membered ring. A simple tridentate ligand has been developed and the derived chlorosilane complex catalyzes the Diels-Alder cycloaddition of methacrolein and cyclopentadiene with 94% ee.     

Method of observation of low density interface states by means of X-ray photoelectron spectroscopy under bias and passivation by cyanide ions

X-ray photoelectron spectroscopy (XPS) measurements under bias can observe low density interface states for metal-oxide-semiconductor (MOS) diodes with low densities. This method can give energy distribution of interface states for ultrathin insulating layers for which electrical measurements cannot be performed due to a high density leakage current. During the XPS measurements, a bias voltage is applied to the rear semiconductor surface with respect to the ∼3 nm-thick front platinum layer connected to the ground, and the bias voltage changes the occupation of interface states. Charges accumulated in the interface states shift semiconductor core levels at the interface, and thus the analysis of the bias-induced shifts of the semiconductor core levels measured as a function of the bias voltage gives energy distribution of interface states. In the case of Si-based MOS diodes, the energy distribution and density of interface states strongly depend on the atomic density of silicon dioxide (SiO₂) layers and the interfacial roughness, respectively. All the observed interface state spectra possess peaked-structures, indicating that they are due to defect states. An interface state peak near the Si midgap is attributable to isolated Si dangling bonds at the interface, while those above and below the midgap to Si dangling bonds interacting weakly with Si or oxygen atoms in the SiO₂ layers. A method of the elimination of interface states and defect states in Si using cyanide solutions has been developed. The cyanide method simply involves the immersion of Si in KCN solutions. Due to the high Si-CN bond energy of ∼4.5 eV, the bonds are not ruptured at 800 °C and upon irradiation. The cyanide treatment results in the improvement of the electrical characteristics of MOS diodes and solar cells.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

Characteristics of hyaluronate-hydroxyethyl acrylate blend gel and release of cationic amphiphilic solutes

Hyaluronate-hydroxyethyl acrylate blend gel (HA-PHEA) were prepared to modify the brittleness of hyaluronate gel (HA) and the characteristics of HA-PHEA gel were compared with those of HA and polyhydroxyethyl acrylate (PHEA) gels. These gels were high in water content and transparent. HA-PHEA gel was improved in viscoelastic properties due to the elasticity and the high affinity with water of PHEA, and the drying-swelling cycles became reversible. The effective charge densities theta of the gels estimated from membrane potentials were -0.002, -0.008 and 0 mol dm(-3) for HA-PHEA, HA and PHEA gels. Effects of electro- static and nonelectrostatic interactions on absorptions and releases were studied using sodium benzoate (NaBA) as an anionic solute, and methylene blue (MB), chlorpromazine (CPHCl) and benzethonium chloride (BZTCl) as cationic solutes, in which CPHCl and BZTCl are cationic amphiphilic solutes. The releases of MB, CPHCl and BZTCl from HA-PHEA and HA gels were suppressed comparing with those of NaBA. By adding salts, the releases of MB and CPHCl were enhanced but those of BZTCl were suppressed due to enhancement of the intra- and intermicelle formation. In the releases of the cationic solutes from HA-PHEA gel, electrostatic and nonelectrostatic interactions with HA were found to play important roles. Behaviors of the releases from HA-PHEA gel were found to possess the features of HA gel.