Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Photophysics of monodisperse platinum-acetylide oligomers: delocalization in the singlet and triplet excited states

A series of monodisperse Pt-acetylide polymers that contain the [-CC-(p-C6H4)-CC-(t-Pt(PBu3)2)-]n repeat unit has been prepared for n = 1, 2, 3, 4, 5, and 7. The photophysical properties of the series provide information concerning the relationship between the oligomer length and delocalization in the singlet and triplet excited states of the pi-conjugated electron system. The results imply that the singlet excited state is delocalized over approximately 6 repeat units; however, the triplet state is considerably more localized. The triplet energy is almost invariant with oligomer length, but the phosphorescence spectra and triplet nonradiative decay rates indicate that the electron-vibrational coupling in the triplet state decreases with increasing oligomer length.     

Study of Photochemical Reactions of Coniferyl Alcohol. II. Comparative Structural Study of a Photochemical and Enzymatic Polymer of Coniferyl Alcohol

The structure of the polymer synthesized by UV irradiation of coniferyl alcohol was studied, using UV-visible, Raman, IR, H-NMR and ¹³C-NMR spectroscopy. The photochemical polymer was compared with the structure of the polymer obtained by peroxidase-catalyzed polymerization of coniferyl alcohol. General similarity of the spectra of the two polymers was shown. However, differences in the fine structure of particular regions of the NMR spectra, as well as in certain bands in the Raman and IR spectra, could be explained through the various bond types and organization within the polymers. These results are consistent with molecular mass distribution of the polymers. Two fractions of enzymatic polymer correspond to the main two fractions of photochemical polymer. The later polymer has additional fractions that are probably the main reason for the observed spectral differences.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Pourbaix diagrams in weakly coupled systems: a case study involving acridinol and phenanthridinol pseudobases

The thermodynamics of proton‐coupled electron transfer (PCET) in weakly coupled organic pseudobases was investigated using 2,7‐dimethyl‐9‐hydroxy‐9‐phenyl‐10‐tolyl‐9,10‐dihydroacridine (AcrOH) and 6‐phenylphenanthridinol (PheOH) as model compounds. Pourbaix diagrams for two model compounds were constructed using the oxidation potentials and the pK_a values obtained, respectively, from cyclic voltammetry and photometric titrations. Our comparative study reveals the importance of having the redox active –N center closer to –OH functionality on the thermodynamics of PCET process: PheOH exhibits a wider range of pH values (pH = 2.8 to 13.3) in which both the alcohol and the corresponding alkoxy radical are expected to coexist in solution. This result indicates that a concerted mechanism is more likely to be discovered in pseudobases analogous to PheOH. The thermochemical data also indicate that the concerted PCET mechanism cannot be achieved if water is used as the proton acceptor: assuming the pK_a of hydronium ions as ?1.7, the PCET involving PheOH or AcrOH as proton/electron donors and water as the proton acceptor is expected to follow the stepwise ET/PT mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

Zinc-phosphate nanoparticles with reversibly attached TNF-α analogs: an interesting concept for potential use in active immunotherapy

The authors’ intention was to prepare nanometer-sized zinc-phosphate nanoparticles that would be capable of binding histidine-rich TNF-α analogs onto their surface via a coordinative bond. Zinc-phosphate nanoparticles with a size of around 60 nm were prepared by a wet precipitation method and characterized using SEM, EDX, XRD, and DLS. First, BSA was bound as a testing protein, afterward two TNF-α analogs with decreased activity were bound to the described nanoparticles. The efficiency of binding and the existence of coordinative bond were confirmed with SDS-PAGE analysis. During binding, particle storage, and release experiments, the prepared TNF-α analogs retained their biological activity—hence the epitopes necessary for formation of antibodies stayed intact. The particle size did not change within a period of 2 weeks. No significant agglomeration was observed, the particles could be quickly dispersed in ultrasound. The present nanoparticles and the general approach of coordinative binding are widely applicable for natural and engineered histidine-rich proteins. The nanoparticles bearing appropriate TNF-α analogs could also be potentially used for active immunotherapy to tackle the chronic inflammatory diseases associated with pathogenically elevated levels of TNF-α.     

Potentiometric and volumetric determination of 6-mercaptopurine

Three methods for the determination of 6-mercaptopurine in the pure state and in tablets are described. One method is based on the reaction of this compound with silver ions, whereby an equivalent amount of nitric acid is liberated, the latter being determined potentiometrically with sodium hydroxide. The other two methods involve titration with chloramine-T, with potentiometric and visual end-point-detection. All methods afford accurate and reproducible results and can be used for routine assay of 6-mercaptopurine in tablets.