Simultaneous analysis of 13C‐glutathione as its dimeric form GSSG and its precursor [1‐13C]glycine using liquid chromatography/isotope ratio mass spectrometry

Determination of glutathione kinetics using stable isotopes requires accurate measurement of the tracers and tracees. Previously, the precursor and synthesized product were measured with two separate techniques, liquid chromatography/isotope ratio mass spectrometry (LC/IRMS) and gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). In order to reduce sample volume and minimize analytical effort we developed a method to simultaneously determine ¹³C‐glutathione as its dimeric form (GSSG) and its precursor [1‐¹³C]glycine in a small volume of erythrocytes in one single analysis. After having transformed ¹³C‐glutathione into its dimeric form GSSG, we determined both the intra‐erythrocytic concentrations and the ¹³C‐isotopic enrichment of GSSG and glycine in 150 µL of whole blood using liquid chromatography coupled to LC/IRMS. The results show that the concentration (range of µmol/mL) was reliably measured using cycloleucine as internal standard, i.e. with a precision better than 0.1 µmol/mL. The ¹³C‐isotopic enrichment of GSSG and glycine measured in the same run gave reliable values with excellent precision (standard deviation (sd) <0.3‰) and accuracy (measured between 0 and 5 APE). This novel method opens up a variety of kinetic studies with relatively low dose administration of tracers, reducing the total cost of the study design. In addition, only a minimal sample volume is required, enabling studies even in very small subjects, such as preterm infants. Copyright © 2009 John Wiley & Sons, Ltd.     

Triorganotin cations stabilized by intramolecular SnN coordination; synthesis and characterization of {C,N,N′-2,6-bis[(dimethylamino)methyl]phenyl}diorganotin bromides

The synthesis of {2,6-bis[(dimethylamino)methyl]phenyl}diorganotin bromides, 2,6-(Me₂NCH₂)₂C₆H₃SnRR′⁺ Br^? is described. The compounds in which R = R′ = Me or Et and R = Me, R′ = Ph are extremely soluble in water and other polar solvents and insoluble or slightly soluble (R = R′ = Et) in apolar solvents. The diphenyl compounds shows the opposite solubility behaviour. The dimethyl compound is completely dissociated in water in to a triorganotin of 84.8 ohm^?1 cm^?1 (1/1 electrolyte). NMR spectroscopy reveals that the triorganotin cation has a TBP structure in which the N atoms occupy axial sites. Dynamic NMR spectra of the methylphenyl compound show that above ?90°C ratedetermining SnN dissociation occurs and that above 5°C second process, involving rate-determining rotation of the substituted aryl group around the (N₂)CSn bond begins.An X-ray investigation of single crystals of the dimethyl compound, which is unstable towards X-rays, establishes the ionic structure of the triorganotin halide in the solid (shortest SnBr 4.99 Å) as well as the molecular geometry of the triorganotin cation. Crystals are monoclinic, space group P2₁/n with Z = 4 in a unit cell of dimensions: a = 11.13(1), b = 16.73(2), c =10.10(1) Å, and β 114.2(1)°.     

Stability of mixed PEO-thiol SAMs for biosensing applications

The secret of a successful affinity biosensor partially hides in the chemical interface layer between the transducer system and the biological receptor molecules. Over the past decade, several methodologies for the construction of such interface layers have been developed on the basis of the deposition of self-assembled monolayers (SAMs) of alkanethiols on gold. Moreover, mixed SAMs of polyethylene oxide (PEO) containing thiols have been applied for the immobilization of biological receptors. Despite the intense research in the field of thiol SAMs, relatively little is known about their biosensing properties in correlation with their long-term stability. Especially the impact of the storage conditions on their biosensing characteristics has not been reported before to our knowledge. To address these issues, we prepared mixed PEO SAMs and tested their stability and biosensing performance in several storage conditions, i.e., air, N2, ethanol, phosphate buffer, and H2O. The quality of the SAMs was monitored as a function of time using various characterization techniques such as cyclic voltammetry, contact angle, grazing angle Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. In addition, the impact of the different storage conditions on the biosensor properties was investigated using surface plasmon resonance. Via the latter technique, the receptor immobilization, the analyte recognition, and the nonspecific binding were extensively studied using the prostate specific antigen as a model system. Our experiments showed that very small structural differences in the SAM can have a great impact in their final biosensing properties. In addition it was shown that the mixed SAMs stored in air or N2 are very stable and retain their biosensor properties for at least 30 days, while ethanol appeared to be the worst storage medium due to partial oxidation of the thiol headgroup. In conclusion, care must be taken to avoid SAM degradation during storage to retain typical SAM characteristics, which is very important for their general use in many proposed applications.     

Analysis of the vibration correlation diagram of base · HCl(DCl) H-bonded complexes in Ar matrices: Type II and intermediate type I → II systems

The Fourier transform infrared spectra of the H-bonded complexes between HCl and 4-aminopyridine, 4-aminopyrimidine, 4-hydroxypyridine, 2-hydroxypyridine, benzimidazole and purine were investigated in Ar matrices. From the analysis of these spectra, the H-bonds N HCl appear to be of the pseudosymmetric type II for 4-aminopyridine, 4-aminopyrimidine and 4-hydroxypyridine, while benzimidazole forms a slightly weaker complex. H-bonding of HCl with the bases 2-hydroxypyridine and purine is of the intermediate type I → II. In the case of 4-aminopyrimidine, additional bonding of the Cl atom of HCl to an amino N---H bond yields a closed complex which explains the type II behaviour. In all other cases, bonding of additional HCl molecules to the 1:1 complexes results in proton transfer towards N---H⁺…Cl⁻(HCl)_π species, but n is much lower for type II than for the intermediate type I → II complexes. The results allow us to investigate the vibration correlation diagram and the isotopic ratio ν(HCl)/ν(DCl) for B - HCl complexes in Ar matrices into more detail.     

Silica filled poly(4-methyl-2-pentyne) nanocomposite membranes: Similarities and differences with poly(1-trimethylsilyl-1-propyne)–silica systems

The performance of poly(4-methyl-2-pentyne) (PMP)/silica nanocomposites was studied for membranes with a filler content between 10 and 40 wt%. An increase in permeability and a constant vapor selectivity were measured with increasing filler content. The constant selectivity was in contrast to earlier published results for silica filled poly(1-trimethylsilyl-1-propyne) (PTSMP) membranes. Therefore, a comparison between both materials was made. Free volume sizes and interstitial mesopore sizes were determined by use of positron annihilation lifetime spectroscopy (PALS) and image analysis was performed on transmission electron microscopy (TEM) pictures of both materials. Although both materials possessed interstitial mesopores, a difference in membrane structure was noticed, explaining the difference in membrane performance.     

Formation of dense self-assembled monolayers of (n-decyl)trichlorosilanes on Ta/Ta2O5

Tantalum pentoxide (Ta2O5) is a promising material for the realization of biological interfaces because of its high dielectric constant, its high chemical stability, and its excellent passivating properties. Nevertheless, the deposition of highly organized silane SAMs to realize well-defined and tailored Ta2O5-based (bio)interfaces, has not been studied in great detail as of yet. In this work, we have investigated the formation of a highly ordered, dense monolayer of trichlorosilanes on Ta2O5 surfaces. Specifically, two different cleaning procedures for Ta2O5 were compared and (n-decyl)trichlorosilane (DTS) was used to study the effect of both cleaning methods on the silanization of Ta2O5. Both types of cleaning allowed the formation of complete and crystalline DTS monolayers on Ta2O5, in contrast with the incomplete, disordered silane layer assembled on uncleaned Ta2O5. The deposited self-assembled monolayers were studied by means of contact angle goniometry, Brewster angle FTIR, X-ray photoelectron spectroscopy, cyclic voltammetry, and ellipsometry. Infrared analysis exhibited a highly ordered DTS silane film on Ta2O5 and indicated a larger tilt angle of the alkyl chains on this substrate by comparison to DTS on SiO2. Furthermore, with use of ellipsometry and XPS, the silane film thickness on Ta2O5 was determined to be substantially smaller than that reported in the literature for DTS on SiO2, supporting the observations of an increased tilt angle (approximately 45 degrees ) on Ta2O5 than on SiO2 (approximately 10 degrees ). By means of cyclic voltammetry, the formation of a dense, essentially pinhole-free, silane film was observed on the cleaned samples. In conclusion, the fully characterized and optimized procedure for the silanization of Ta2O5 surfaces with trichlorosilanes will allow the formation of well-defined, reproducible, and controllable chemical interfaces on Ta2O5.     

Doping Platinum with Germanium: An Effective Way to Mitigate the CO Poisoning

The vulnerability towards CO poisoning is a major drawback affecting the efficiency and long-term performance of platinum catalysts in fuel cells. In the present work, by a combination of density functional theory calculations and mass spectrometry experiments, we test and explain the promotional effect of Ge on Pt catalysts with higher resistance to deactivation via CO poisoning. A thorough exploration of the configurational space of gas-phase Pt_n⁺ and GePt_n−1⁺ (n=5–9) clusters using global minima search techniques and the subsequent electronic structure analysis reveals that germanium doping reduces the binding strength between Pt and CO by hindering the 2π-back-donation. Importantly, the clusters remain catalytically active towards H₂ dissociation. The ability of Ge to weaken the Pt−CO interaction was confirmed by mass spectrometry experiments. Ge can be a promising alloying agent to tune the selectivity and improve the durability of Pt particles, thus opening the way to novel catalytic alternatives for fuel cells.     

Cr(III) and Cr(VI) speciation measurements in environmental reference materials

The production of reference materials for quality control of Cr(III) and Cr(VI) speciation in environmental samples is described. It concerns in the first place two lyophilized solutions containing Cr(III) and Cr(VI) at different concentrations, respectively representative for drinking water and filter leaching solutions, and in the second place filters loaded with welding dust. Twenty-four laboratories with experience in the field participated in an intercomparison exercise organized to validate the suitability of the reference materials and to gauge the state-of-the-art of Cr speciation throughout Europe. The outcome of this exercise is discussed.     

Diameter increase caused by edge deletion

We consider the following problem: Given positive integers k and D, what is the maximum diameter of the graph obtained by deleting k edges from a graph G with diameter D, assuming that the resulting graph is still connected? For undirected graphs G we prove an upper bound of (k + 1)D and a lower bound of (k + 1)D ? k for even D and of (k + 1)D ? 2k + 2 for odd D ? 3. For the special cases of k = 2 and k = 3, we derive the exact bounds of 3D ? 1 and 4D ? 2, respectively. For D = 2 we prove exact bounds of k + 2 and k + 3, for k ? 4 and k = 6, and k = 5 and k ? 7, respectively. For the special case of D = 1 we derive an exact bound on the resulting maximum diameter of order θ(√k). For directed graphs G, the bounds depend strongly on D: for D = 1 and D = 2 we derive exact bounds of θ(√k) and of 2k + 2, respectively, while for D ? 3 the resulting diameter is in general unbounded in terms of k and D. Finally, we prove several related problems NP-complete.     

Certified reference materials (CRMs 398 and 399) for the quality control of major element determination in freshwater

Analyses of freshwater are routinely performed by a number of organisations to monitor the levels of major elements. In order to improve and control the quality of such determinations, the Community Bureau of Reference (BCR) has organised a certification campaign to produce two reference materials (CRM 398, low element content and CRM 399, high element content) certified for their contents of Al, Ca, Cl, Fe, Mg, Mn, K, Na, P and S. These materials were carefully prepared (addition of the elements mentioned in the form of ammonium salts or nitrates to silica free deionised water) and their homogeneity and long term stability were verified. This paper presents the certification work performed.