基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．     

Amplifiers and Lasers in PCF Configurations

In this paper we will present an overview of the use of photonic crystal fibers as fiber amplifiers. We will describe the basic concepts of optical amplification, and how to do numerical modelling of such components. We will then identify advantages and disadvantages of amplifiers based on PCF technology compared to conventional fibers, and then go into greater detail on some of these specific applications, such as low pump power amplifiers, and high-power double-clad amplifiers and lasers.     

高温超导体Josephson阵列在磁场中的微波响应与磁通涡旋激发

本文从分析相变电阻率 ρP 和磁通蠕动电阻率 ρF 出发 ,指出当T小于某一温度T0 时 ,ρF>ρP,而当T >T0 时 ,ρF 远小于 ρP,并进一步分析了 ρF 与 ρP 随温度的变化率分布图 ,得出磁通蠕动电阻率 ρF 随温度的变化率分布图跟微波响应曲线具有相似的分布特征 ,结果表明 :高温超导体的非平衡微波响应机制可能与磁通涡旋的激发有关 .     

THE STUDY OF SERS EFFECT AND ADSORPTION PROPERTY ON Cu SURFACE FOR PNBA

With different amounts of KCl added in the PNBA(p- nitro benzoic acid) aqueous solution, the factors affecting the SERS (Surface Enhanced Raman Scattering) are studied systematically on the surface of Copper. The results show that in PNBA aqueous solution the occurrence of SERS effect stongly depends on the existence of Cl^-. The amount of KCl added affects not only the emergence and the intensity of SERS effect, but also the adsorption properties such as the adsorption manner,etc.     

聚醚醚酮链结构与反应的模型化合物的量子化学研究

利用ＡＭ１方法对聚醚醚酮模型化合物全优化，结果为：芳环平均相互扭转角为３３．０度，桥键角１１７．０－１１８．０度，其分子结构拓扑图形表明：所有苯环（核）为平面构型，但其内角扭曲；其氢原子对苯环构型无实质性贡献，在更长链的计算中，冻结苯核与氢原子也得出满意结果，根据Ｍｕｌｌｉｋｅｎ键序与电荷讨论了醚交换与磺化反应。     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

Microelectromagnet for magnetic manipulation in lab-on-a-chip systems

We demonstrate a simple scheme for fabrication of microelectromagnets consisting of planar spiral coils semi-encapsulated in soft magnetic yokes using conventional microfabrication techniques. The microelectromagnets are suitable for applications operating at frequencies below 250 kHz. Conventional fabrication schemes for planar microelectromagnets typically rely on five mask steps. We allow the current to flow in the soft magnetic yoke and thereby two mask steps are eliminated. We have characterized the electromagnets electrically, the results agree well with theory, and the implications arising from current flowing in the magnetic yoke are discussed. We have integrated the microelectromagnets with microfluidic channels, and demonstrated separation of commercially available magnetic beads from a fluid in a microfluidic system, i.e. a lab-on-a-chip system.     

超声波波型转换与表面波的检测

分析了超声波纵波、横波、表面波3种波型的产生条件和声速关系,检测了超声波在固体表面的波型转换,并测量了声表面波的速度,讨论了声表面波在超声延迟线方面的应用.