Direct analysis of thin-layer chromatographic spots of narcotics by means of diffuse reflectance Fourier transform infrared spectroscopy

The technique of diffuse reflectance Fourier transform infrared spectrometry (DRIFT) as an in situ detection method was used for the qualitative and quantitative analysis of drugs (heroin, cocaine and codeine) separated by thin layer chromatography.It was found that at a given interferometer throughput and detector sensitivity the quality of the spectrum depends strongly in the type of the chromatographic thin layer used. A detection limit of approx. 2 g was attained on a microcrystalline cellulose thin layer with a dynamically aligned Bio-Rad Digilab FTS 60A/896 type interferometer and room temperature DTGS detector. A reliable qualitative analysis can be made with as little as 10 to 15 g drug per spot.     

A simple device for continuous and selective detection of water vapour evolved during thermal decomposition reactions

A technique developed for the continuous and selective detection of water vapour formed during thermal decomposition reactions is described. The device can be connected to different types of thermoanalytical instruments without any difficulties. The detector can closely follow changes in the amount of water released during decomposition reactions, with negligible time delay. The signal curves obtained by the detector can be compared to the simultaneously recorded thermoanalytical curves and used to determine the step in which the water was released. The device as a free standing unit can be used to detect water plugs in different gas flows as well.     

Continuous determination of carbon dioxide evolved during thermal decomposition reactions

A simple device suitable for continuous monitoring of carbon dioxide evolved during thermal decomposition reactions is described. Carbon dioxide is transported by a carrier gas through the device connected to thermoanalytical equipment and absorbed by soda lime reagent. The reaction heat released is linearly proportional to the amount of carbon dioxide absorbed.     

Investigation of RuO2-IrO2-SnO2 thin film evolution

The thermal evolution process of RuO₂–IrO₂–SnO₂ mixed oxide thin films of varying noble metal contents has been investigated under in situ conditions by thermogravimetry-mass spectrometry (TG-MS), infrared emission spectroscopy (IR) and cyclic voltammetry (CV). The gel-like films prepared from aqueous solutions of the precursor compounds RuOHCl₃, H₂IrCl₆ and Sn(OH)₂(CH₃COO)_2–xCl_x on titanium metal support were heated in an atmosphere containing 20% O₂ and 80% Ar up to 600°C. Chlorine evolution takes place in a single step between 320 and 500°C accompanied with the decomposition of the acetate ligand. The decomposition of surface species formed like carbonyls, carboxylates and carbonates occurs in two stages between 200 and 500°C. The temperature of chlorine evolution and that of the final film formation increases with the increase of the iridium content in the films. The anodic peak charge shows a maximum value at 18% iridium content.     

Expedient and Diastereodivergent Assembly of Terpenoid Decalin Subunits having Quaternary Stereocenters through Organocatalytic Robinson Annulation of Nazarov Reagent

We report an expedient approach to highly functionalized cis‐ and trans‐decalines that could function as key structural subunits toward the synthesis of various classes of terpenoids. Key to the strategy is an organocatalyzed Robinson annulation reaction of the Nazarov reagent that affords chiral enone building blocks with high enantioselectivities. The quaternary carbon stereogenic center can direct the subsequent reactions and allow the rapid and diastereoconvergent assembly of complex decalines with contiguous stereocenters.     

Studies on self-assembly hydrothermal fabrication and thermal stability of Chromium oxyhydroxide nanomaterials synthesised from Chromium oxide colloids

Chromium oxyhydroxide nanomaterials with narrow size-distribution were synthesised through a simple hydrothermal method. Experimental conditions, such as reaction duration and pH values of the precipitation process and hydrothermal treatment played important roles in determining the nature of the final product chromium oxyhydroxide nanomaterials. The effect of these synthesis parameters were studied with the assistance of X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and thermogravimetric analyses. This research has developed a controllable synthesis of Chromium oxyhydroxide nanomaterials from Chromium oxide colloids.     

Simultaneous determination of inorganic arsenic,antimony, selenium and tellurium by ICP-MS in environmental waters using SPE preconcentration on modified silica

This paper deals with a simplified multi-element profiling of inorganic arsenic, antimony, selenium and tellurium in the form of ⁷⁵As, ⁸²Se, ¹²¹Sb and ¹²⁵Te by ICP-MS for amounts less than 10?µg?L^?1. Internal standards such as ⁷²Ge and ²⁰⁹Bi were successfully used for the suppression of both influence of macro elements Na⁺, K⁺, Ca²⁺, Mg²⁺ or Al³⁺, and interference of limited concentrations of heavy metal ions. Modified silica sorbents Separon? SGX C18, C8, CN, NH₂, RPS and Phenyl were tested for the preconcentration of As, Sb, Se and Te (0.25–5?µg?L^?1) in the form of ion associates with cationic surfactants from 50–250?mL sample volume. 1-etoxycarbonyl-pentadecyltrimethylammonium bromide (Septonex®, 0.005?mol?L^?1) was suitable for this purpose in the presence of 4-(2-pyridylazo) resorcinol, 2-pyrrolidinecarbodithioate and 8-hydroxyquinoline-5-sulphonic acid. The quantitative retention occurred at pH 7?±?0.2 and the mixture of acetone with ethanol in ratio 1?:?1 in the presence of 0.1?mol?L^?1 HCl was used for the quantitative elution. Organic solvents and the excess of acid were removed by evaporation prior to the determination by ICP-MS. The determination of the above trace metalloids in various kinds of water with enrichment factor till 50 times on silica Separon? SGX C18 and the above reagents were compared with the standard addition method.     

Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue

Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO₂ at 1000 ℃. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (S_BET) of 2172 m²/g and an enhanced pore volume of 1.08 cm³/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems.