A microspectroscopic study of the electronic homogeneity of ordered and disordered Sr2FeMoO6

Disordered Sr₂FeMoO₆ shows a drastic reduction in saturation magnetization compared to highly ordered samples, moreover magnetization as a function of the temperature for different disordered samples shows qualitatively different behaviours. We investigate the origin of such diversity by performing spatially resolved photoemission spectroscopy on various disordered samples. Our results establish that e_xtensive electronic inhomogeneity, arising most probably from an underlying chemical inhomogeneity in disordered samples, is responsible for the observed magnetic inhomogeneity. It is further pointed out that these inhomogeneities are connected with composition fluctuations of the type Sr₂Fe_1+x Mo_1-x O₆ with Fe-rich (x > 0) and Mo-rich (x < 0) regions. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.     

FTIR and FT-Raman spectra, vibrational assignments and density functional theory calculations of 2,6-dibromo-4-nitroaniline and 2-(methylthio)aniline

The FTIR and FT-Raman spectra of 2,6-dibromo-4-nitroaniline (2,6-DB4NA) in solid phase and 2-(methylthio)aniline (2-MTA) in liquid phase were measured. The geometry and normal vibrations have been obtained from the density functional theory (DFT) with the B3LYP method employing the 6-31G* basis set. Scale factors, which bring computational frequencies in closer agreement with the experimental data, have been calculated for predominant vibrational motions of the normal modes. The effects of the amino, bromine, nitro, thio and methyl substituents on vibrational frequencies have been investigated. The infrared and Raman spectra were also predicted from the calculated intensities. The observed and the calculated spectra were found to be in good agreement.     

Asymmetric synthesis of highly substituted beta-nitro alcohols and enantiomerically enriched 4,4,5-trisubstituted oxazolidinones

It is demonstrated that alpha,alpha-disubstituted-alpha-nitroketones are reduced to the corresponding trisubstituted nitro alcohols in good to excellent yield and enantiomeric excess by borane-dimethyl sulfide in the presence of a chiral oxazaborolidine catalyst. Reduction of the nitro alcohols to the corresponding amino alcohols and their subsequent conversion to enantiomerically enriched 4,4,5-trisubstituted oxazoldinones is also reported.     

A theoretical and experimental investigation of the formation of S 2 - from CS2 by electron impact

Theoretical and experimental investigation of the formation of S ₂ ^- from CS₂ by electron impact has been carried out. Molecular orbital calculations show that some of the low lying states of CS ₂ ^- have lower potential energy in the bent geometries suggesting a transformation in the geometric structure of the precursor molecular ion, leading to the formation of S ₂ ^- . In contrast to the formation of S ₂ ^- and S ₂ ^- , the kinetic energy associated with S ₂ ^- is small and disproportionate to the increase in electron energy, indicating the formation of S ₂ ^- in vibrationally excited states due to the mechanism of its formation.     

Use of organophosphorus extractants impregnated on silica gel for the extraction chromatographic separation of minor actinides from high level waste solutions

Silica-gel has been used as an inert support for the extraction chromatographic separation of actinides and lanthanides from HNO₃ and synthetic high level waste (HLW) solutions. Silica-gel was impregnated with tri-butyl phosphate (TBP), to yield STBP; 2-ethylhexyl phosphonic acid, mono 2-ethylhexyl ester (KSM-17, equivalent to PC-88A), SKSM; octyl(phenyl)-N,N-diisobutyl carbamoylmethylphosphine oxide (CMPO), SCMPO; and trialkylphosphine oxide (Cyanex-923), SCYN and sorption of Pu(IV), Am(III) and Eu(III) from HNO₃ solutions was studied batchwise. Several parameters, like time of equilibration, HNO₃ and Pu(IV) concentrations were varied. The uptake of Pu(IV) from 3.0M HNO₃ followed the order SCMPO>SCYN>SKSM>STBP. With increasing HNO₃ concentration, D _Pu increased up to 3.0M of HNO₃ for STBP, SKSM and SCMPO and then decreased. In the case of Am and Eu with SCMPO, the D values initially increased between 0.5 to 1.0M of HNO₃, remained constant up to 5.0M and then slightly decreased at 7.5M. Also, the effects of NaNO₃, Nd(III) and U(VI) concentrations on the uptake of Am(III) from HNO₃ solutions were evaluated. With increasing NaNO₃ concentration up to 3.0M, D _Am remained almost constant while it was observed that it decreases drastically by adding Nd(III) or U(VI). The uptake of Pu and Am from synthetic pressurized heavy water reactor high level waste (PHWR-HLW) in presence of high concentrations of uranium and after depleting the uranium content, and finally extraction chromatographic column separation of Pu and Am from U-depleted synthetic PHWR-HLW have been carried out. Using SCMPO, high sorption of Pu, Am and U was obtained from the U-depleted HLW solution. These metal ions were subsequently eluted using various reagents. The sorption results of the metal ions on silica-gel impregnated with several phosphorus based extractants have been compared. The uptake of Am, Pu and rare earths by SCMPO has been compared with those where CMPO was sorbed on Chromosorb-102, Amberchrom CG-71 and styrene divinylbenzene copolymer immobilized in porous silica particles.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Performance of immobilized Saccharomyces cerevisiae in the removal of long lived radionuclides from aqueous nitrate solutions

The efficiency of tailor made immobilized Saccharomyces cerevisiae(biomatrix) for the sorption of radionuclides ²³³U, ²³⁹Pu, ²⁴¹Am, ¹³⁷Ce, ¹⁴⁴Cs, ^103,106Ru and ⁹⁰Sr from aqueous nitrate solutions at different pH was studied. Effect of ionic strength, anionic components, initial metal concentration and particle size of the biomatrix on the sorption of metal ions were investigated. At pH in the range of 1 to 2 more than 95% sorption of U, Pu, Am and Ce could be accomplished, while that of Ru was 65%. Sorption of Cs and Sr were negligible under similar conditions. The metal ion-biomatrix system for Pu, Am and Ce reached equilibrium within 60 minutes. In the case of U, equilibrium attained in 100 minutes. The presence of anionic components, Cl^-, C₂O₄ ^2-, CH₃COO^-, NO₃ ^- and SO₄ ^2- (up to 0.5 mol^.dm^-3 of their individual concentration) in the aqueous solutions has no effect on the sorption of Pu by the biomatrix. Sorption of U, Pu, Am were observed in the presence of several cationic impurities such as Al, Be, Cd, Cr, Fe, Mn, Pb, Ce, Dy, Eu, Gd and Sm. Metal sorbed on the biomatrix could be leached out using 5 mol^.dm^-3 nitric acid. The I.R spectra of U bearing biomatrix suggest chemical interaction of uranyl ion with the biomatrix.     

Estimation of 90Sr in reprocessed uranium oxide samples

Summary A method has been developed for the estimation of ⁹⁰Sr in reprocessed uranium oxide samples obtained from the Purex processing of natural uranium spent fuel discharged from the research reactor. The method employs a combination of precipitation and solvent extraction procedure to eliminate other beta-impurities prior to resorting to the estimation of ⁹⁰Sr by beta-counting. ¹⁰⁶Ru was eliminated by volatalizing with perchloric acid, uranium was removed by carrier precipitation with strontium as sulphate. The sulphate precipitate was converted to carbonate and dissolved in nitric acid. ²³⁴Th and ²³⁴Pa were eliminated by synergistic solvent extraction using tri-n-butyl phosphate and thenoyl trifluoroacetone extractant mixture in xylene. An iron scavenging step was included to remove any residual impurities. Finally, strontium is precipitated as SrC₂O₄^. H₂O. The separated ⁹⁰Sr activity was followed to check the equilibrium growth of ⁹⁰Y.