Nano-alumina by gel combustion, its thermal characterization and slurry-based coating on stainless steel surface

Gel combustion method was used to prepare nano-alumina from aluminum nitrate and stoichiometric amount of glycine as fuel. The TG–DTA pattern of the as-prepared powder (combustion product) exhibited exotherms with peaks around 500 and 900 °C accompanied with loss of weight of 25 and 5 % attributed to burning away of carbon left behind and decomposition of residual reaction intermediates left behind, respectively. Even though mass stability is attained above 900 °C, the DTA exhibited an exotherm around 1,150 °C attributed to transformation of gamma to alpha form of alumina. The XRD studies revealed that the powder heated to 900 °C was chemically pure nano-crystalline alumina while that heated above 1,150 °C was crystalline alpha form. As nano-crystalline powders are sinter-active, the nano-crystalline alumina formed by calcination at 900 °C was used to form the coating. A morphological feature of the agglomerates of nano-alumina powders were evaluated using SEM. The powder was de-agglomerated by wet grinding method. The dispersion conditions to form slurry using 900 °C calcined powder for slurry-based coating was optimized using zeta-potential studies, and it was found to exhibit a maximum value of ?45 mV at a pH of 9. After 8 h of grinding, the median agglomerate size reduced to 2 μm. Rheological studies exhibited desired pseudoplastic behavior in the range of 10–20 vol.% of solid while the slurry with 15 vol.% only form crack free, dense, and adherent coating after heat treatment at 1,150 °C. The morphology of the coating was found to be uniform and dense.     

Investigation of chemical space networks using graph measures and random matrix theory

Journal of Mathematical Chemistry - Large collections of molecules (chemical libraries) are nowadays routinely screened in the process of designing drugs for specific ailments. Chemical and...     

Low-threshold optical power limiting of cw laser illumination based on nonlinear refraction in zinc tetraphenyl porphyrin

The increasing use of low power cw lasers in various applications calls for the design of optical limiters with low thresholds. To this end, the optical nonlinearity exhibited by zinc tetraphenyl porphyrin at low laser powers is utilized to design an optical limiter for low threshold operation. The basic parameter responsible for limiting action, the nonlinear refractive index of the medium, is measured using the Z-scan technique and found to have a value of at the helium–neon laser wavelength of 632.8 nm. The origin of nonlinearity is explained on the basis of the thermal lens model. It is shown that effective optical limiting at desired threshold values can be achieved by the optimal choice of aperture size and experimental geometry.     

MAS-NMR study of lithium zinc silicate glasses and glass-ceramics with various ZnO content

Lithium zinc silicate glasses of composition (mol%): 17.5Li₂O-(72−x)SiO₂-xZnO−5.1Na₂O−1.3P₂O₅−4.1B₂O₃, 5.5?x?17.7, were prepared by conventional melt-quenched technique and converted to glass-ceramic by controlled crystallization process. ²⁹Si and ³¹P MAS-NMR was used to characterize the structure of both glass and glass-ceramic samples. Despite the complex glass composition, Q², Q³ and Q⁴ sites are identified from ²⁹Si MAS-NMR, which relative intensities are found to vary with the ZnO content, indicating a network depolymerization by ZnO. Moreover, well separated Q³ and Q⁴ resonances for low ZnO content indicates the occurrence of phase separation. From ³¹P MAS-NMR, it is seen that phosphorus is mainly present in the form of ortho-(Q⁰) and pyro-phosphate (Q¹) structural units and variation of ZnO content did not have much effect on these resonances, which provides an additional evidence for phase separation in the glass. On conversion to glass-ceramics, lithium disilicate (Li₂Si₂O₅), lithium zinc ortho-silicate (Li₃Zn_0.5SiO₄), tridymite (SiO₂) and cristobalite (SiO₂) were identified as major silicate crystalline phases. Using ²⁹Si MAS-NMR, quantification of these silicate crystalline phases is carried out and correlated with the ZnO content in the glass-ceramics samples. In addition, ³¹P spectra unambiguously revealed the presence of crystalline Li₃PO₄ and (Na,Li)₃PO₄ in the glass-ceramics.     

Spectrally resolved phase-shifting interferometry for accurate group-velocity dispersion measurements

We report an accurate method to measure the group-velocity dispersion (GVD) of transparent materials by use of spectrally resolved phase-shifting interferometry. The GVD of silica glass slide measured using an eight-step phase-shifting algorithm agrees well with that calculated using the Sellmeier dispersion equation over the entire visible wavelength region, with a rms error of < or =0.0036 microm(-2), better than that of other measurement methods reported so far.     

Setting sensitivity in Talbot interferometry with modified gratings

A dual field grating has been introduced for use in Talbot interferometry. We report here results of an experimental investigation on setting sensitivity when using these gratings for testing.     

Three-beam heterodyne interferometer

The heterodyne technique has been applied to three-beam interference, and three interferometer arrangements are discussed. These arrangements are suitable for electronic measurement of optical phase. A three-beam heterodyne interferometer is demonstrated.     

Rapid hydrocarbon type separation of vacuum residues

Summary A simple and fast column chromatographic procedure for the separation of vacuum residues into saturates, mono-, di-, polyaromatics and polars has been standardized using silica-alumina-bauxite adsorbents and gradient elution with n-pentane, benzene, and methanol. The cut points have been monitored employing ultraviolet and infrared spectroscopy. The method is applicable for preparative separation of short residues from processed products.

---

Rasche Trennung der Kohlenwasserstofftypen von Vakuum-RückstÄnden

     

A novel bacteriohopanoid from Celtis australis L.bark

A novel bacteriohopanoid elucidated as 3β-hydroxy-35-(cyclohexyl-5’-propan-7’-one)-33-ethyl-34-methyl-bactereohopane(1) has been isolated from the bark of Celtis australis(Ulmaceae) together with three known compounds apigenin,quercetin and its glucoside.The structure of 1 was characterized by means of chemical and spectral methods including advanced 2D NMR studies.     

MAS-NMR investigations of the crystallization behaviour of lithium aluminum silicate (LAS) glasses containing P2O5 and TiO2 nucleants

Lithium aluminum silicate (LAS) glass of composition (mol%) 20.4Li₂O-4.0Al₂O₃-68.6SiO₂-3.0K₂O-2.6B₂O₃-0.5P₂O₅-0.9TiO₂ was prepared by melt quenching. The glass was then nucleated and crystallized based on differential thermal analysis (DTA) data and was characterized by ²⁹Si, ³¹P, ¹¹B and ²⁷Al MAS-NMR. XRD and ²⁹Si NMR showed that lithium metasilicate (Li₂SiO₃) is the first phase to c form followed by cristobalite (SiO₂) and lithium disilicate (Li₂Si₂O₅). ²⁹Si MAS-NMR revealed a change in the network structure already for the glasses nucleated at 550 °C. Since crystalline Li₃PO₄, as observed by ³¹P MAS-NMR, forms concurrently with the silicate phases, we conclude that crystalline Li₃PO₄ does not act as a nucleating agent for lithium silicate phases. Moreover, ³¹P NMR indicates the formation of M-PO₄ (M=B, Al or Ti) complexes. The presence of BO₃ and BO₄ structural units in all the glass/glass-ceramic samples is revealed through ¹¹B MAS-NMR. B remains in the residual glass and the crystallization of silicate phases causes a reduction in the number of alkali ions available for charge compensation. As a result, the number of trigonally coordinated B (BO₃) increases at the expense of tetrahedrally coordinated B (BO₄). The ²⁷Al MAS-NMR spectra indicate the presence of tetrahedrally coordinated Al species, which are only slightly perturbed by the crystallization.