Status of heavy element research using a gas-filled recoil separator at RIKEN

A gas-filled type of recoil separator for heavy element research was installed at an experimental hall of RIKEN Linear Accelerator facility to realize getting higher intensity of primary beam and long beam time. Performance of the separator was studied using target recoils and various nuclear reactions. The results show the high performance of the separator for heave element research. As an application of the GARIS, production and identification of an isotope of the 110th element ²⁷¹[110] have been performed using the ²⁰⁸Pb(⁶⁴Ni,1n)²⁷¹[110] reaction. Three decay chains coincide well both in decay times and energies with the ones reported by the group of SHIP experiment at GSI, Germany. Our results provide a confirmation of the synthesis of an isotope ²⁷¹[110] of element 110.     

A novel pre-shearing technique for measurement of the electrorheological effect of a side-chain liquid crystalline polysiloxane

A side-chain liquid crystalline polysiloxane derivative possessing mesogens was synthesized. The mesogens included a large dielectrically-anisotropic moiety. Phase transition behaviour was investigated and the electrorheological (ER) effect of the polymer considered. No ER effect was observed in non-sheared polysiloxane derivative because of its high inherent viscosity. However, a large ER effect was observed after pre-shearing. Pre-shearing, i.e. shearing with a high shear rate before the measurements, arranges the terminal mesogens in the shearing direction. Furthermore, a dilution of the sample led to a larger ER effect exceeding 10 000 Pa. We thus were able to demonstrate a new approach for the appearance of the ER effect.     

Photoreaction of anthracenyl phosphine oxides: Usual reversible photo- and heat-induced emission switching,and unusual oxidative PC bond cleavage

Anthracenyl(diphenyl)phosphine oxide and dianthracenylphenylphosphine oxide as photoactive compounds have been synthesized. Anthracenyl group of these compounds indicate the multi-functional roles such as an emission component, a photodimerization component, and a leaving group. When the light irradiation was performed under an oxygen atmosphere, photo-oxidative PC bond cleavage to leave the antharacenyl group was observed. Moreover, phosphonyl radical was produced and then PP bond formation to form diphosphane was observed.     

New catalytic cycle for couplings of aldehydes with organochromium reagents

[reaction: see text] A new catalytic cycle has been developed to effect all three subgroups of Cr-mediated couplings, i.e., (1) Ni/Cr-mediated alkenylation, alkynylation, and arylation, (2) Co/Cr-mediated 2-haloallylation, alkylation, and propargylation, and (3) Cr-mediated allylation. In the presence of chiral sulfonamide ligands, good asymmetric inductions can be achieved for some of the Ni/Cr-mediated alkenylation, Co/Cr-mediated 2-haloallylation and propargylation, and Cr-mediated allylation.     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.     

Umbelliferose Isolated from Cuminum cyminum L. Seeds Inhibits Antigen-Induced Degranulation in Rat Basophilic Leukemia RBL-2H3 Cells

Cuminum cyminum L. (cumin) is an annual plant of the Umbelliferae family native to Egypt. We previously showed that the aqueous extract of cumin seeds suppresses degranulation by downregulating the activation of antigen-induced intracellular signaling molecules in rat basophilic leukemia RBL-2H3 cells. However, the active substances in the extract have not yet been identified. Accordingly, herein, we aimed to ascertain the water-soluble substances present in cumin seeds that inhibit degranulation, which led to the identification of umbelliferose, a characteristic trisaccharide present in plants of the Umbelliferae family. Our study is the first to reveal the degranulation-suppressing activity of umbelliferose, and quantification studies suggest that cumin seed powder contains 1.6% umbelliferose. Raffinose, an isomer of umbelliferose, was also found to significantly suppress antigen-induced degranulation, but less so than umbelliferose. Both umbelliferose and raffinose contain sucrose subunits in their structures, with galactose moieties bound at different sites. These differences in structure suggest that the binding of galactose to the sucrose subunit at the α1-2 bond contributes to its strong degranulation-inhibiting properties.     

An anthracene-based Cd fluorescent chemosensor with a 4,7-bis(2-hydroxyethyl)-9-hydroxy-1,4,7-triazanonyl group as a highly selective chelator to Cd over Zn

We have developed a Cd²⁺ fluorescent chemosensor with high selectivity as well as sensitivity by tethering a 4,7-bis(2-hydroxyethyl)-9-hydroxy-1,4,7-triazanonyl chelator to anthracene. This sensor features the ability to discriminate Cd²⁺ from Zn²⁺ to a high degree (K_dZn/K_dCd = 560) in a pH 7.2 buffer.     

Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stereoselective analysis of flecainide enantiomers using reversed‐phase liquid chromatography for assessing CYP2D6 activity

Stereoselective analyses of flecainide enantiomers were performed using reversed‐phase high‐performance liquid chromatography (HPLC) equipped with a polysaccharide‐based chiral column (Chiralpak AS‐RH) and fluorescence detector. Excitation and emission wavelengths were set at 300 and 370 nm, respectively. Flecainide enantiomers in serum and urine were extracted using diethyl ether. The mobile phase solution, comprising 0.1 m potassium hexafluorophosphate and acetonitrile (65:35, v/v), was pumped at a flow rate of 0.5 mL/min. The recoveries of flecainide enantiomers were greater than 94%, with the coefficients of variation (CVs) <6%. The calibration curves of flecainide enantiomers in serum and urine were linear in the concentration range 5–500 ng/mL and 0.75–15 µg/mL (r > 0.999), respectively. CVs in intra‐day and inter‐day assays were 1.8–5.8 and 3.4–7.5%, respectively. In a pharmacokinetic study, the ratios of (S)‐ to (R)‐flecainide (S/R ratio) in the area under the curve and the amount of flecainide enantiomers excreted in urine were lower in a subject carrying CYP2D6*10/*10 than in subjects carrying CYP2D6*1/*2. The S/R ratio of trough serum flecainide concentration ranged from 0.79 to 1.16 in patients receiving oral flecainide. The present HPLC method can be used to assess hepatic flecainide metabolism in a pharmacokinetic study and therapeutic drug monitoring. Copyright © 2014 John Wiley & Sons, Ltd.