Characterization and reactivity of copper oxide catalysts supported on TiO2-ZrO2

A series of copper catalysts supported on TiO2-ZrO2 with copper loading varying from 1.0 to 21.6 wt % were prepared by a wet impregnation method. The catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, electron spin resonance (ESR), temperature programmed reduction (TPR), and Brunauer-Emmett-Teller specific surface area measurements. Copper dispersion and metal area were determined by N2O decomposition by the passivation method. XRD results suggest that the copper oxide is present in a highly dispersed amorphous state at copper loadings <16.8 wt % in the sample and as a crystalline CuO phase at higher Cu loadings. Copper dispersion increases with Cu loading up to 5.1 wt % and levels off at higher loadings. The XPS peak intensity ratios of Cu 2p(3/2)/Ti 2p(3/2) and Cu 2p(3/2)/Zr 3d(5/2) were compared with the copper dispersion calculated from N2O decomposition. ESR results suggest the presence of two types of copper species on the TiO2-ZrO2 support. TPR profiles reveal the presence of highly dispersed copper oxide at lower temperatures and bulk CuO at higher temperatures. The catalytic properties were evaluated for the vapor-phase dehydrogenation of cyclohexanol to cyclohexanone and related to the dispersion of Cu on TiO2-ZrO2.     

Dispersion and reactivity of copper catalysts supported on Al2O3-ZrO2

A series of CuO/Al(2)O(3)-ZrO(2) catalysts with Cu loadings varying from 1.0 to 20 wt % were prepared and characterized by X-ray diffraction (XRD), temperature-programmed reduction (TPR), temperature-programmed desorption (TPD) of CO(2) and NH(3), electron spin resonance (ESR), and Brunauer-Emmett-Teller surface area measurements. The dispersion and metal area of copper were determined by the N(2)O decomposition method. XRD results suggest that the copper oxide is present in a highly dispersed amorphous state at copper loadings < 10 wt % and as a crystalline CuO phase at higher Cu loadings. ESR results suggest the presence of two types of copper species on the Al(2)O(3)-ZrO(2) support. TPR results suggest well-dispersed copper oxide species at low Cu loadings and crystalline copper oxide species at high Cu loadings. Well-dispersed copper oxide species were reduced more easily than large copper oxide species by H(2). The results of CO(2) TPD suggest that the basicity of the catalysts was found to increase with an increase of copper loading up to 5.0 wt % and decreases with a further increase of copper loading. The results of NH(3) TPD suggest that the acidity of the catalysts was found to decrease with an increase of copper loading up to 5.0 wt % and increases with a further increase of copper loading. The catalytic properties were evaluated for the vapor-phase dehydrogenation of cyclohexanol to cyclohexanone and correlated with the results of CO(2) TPD measurements and the dispersion of Cu on the Al(2)O(3)-ZrO(2) support.     

Structure and Catalytic Properties of Ceria-based Nickel Catalysts for CO<Subscript>2</Subscript> Reforming of Methane

Carbon dioxide reforming (CDR) of methane to synthesis gas over supported nickel catalysts has been reviewed. The present review mainly focuses on the advantage of ceria based nickel catalysts for the CDR of methane. Nickel catalysts supported on ceria–zirconia showed the highest activity for CDR than nickel supported on other oxides such as zirconia, ceria and alumina. The addition of zirconia to ceria enhances the catalytic activity as well as the catalyst stability. The catalytic performance also depends on the crystal structure of Ni–Ce–ZrO₂. For example, nickel catalysts co-precipitated with Ce_0.8Zr_0.2O₂ having cubic phase gave synthesis gas with CH₄ conversion more than 97% at 800 °C and the activity was maintained for 100 h during the reaction. On the contrary, Ni–Ce–ZrO₂ having tetragonal phase (Ce_0.8Zr_0.2O₂) or mixed oxide phase (Ce_0.5Zr_0.5O₂) deactivated during the reaction due to carbon formation. The enhanced catalytic performance of co-precipitated catalyst is attributed to a combination effect of nano-crystalline nature of cubic Ce_0.8Zr_0.2O₂ support and the finely dispersed nano size NiO _x crystallites, resulting in the intimate contact between Ni and Ce_0.8Zr_0.2O₂ particles. The Ni/Ce–ZrO₂/θ–Al₂O₃ also exhibited high catalytic activity during CDR with a synthesis gas conversion more than 97% at 800 °C without significant deactivation for more than 40 h. The high stability of the catalyst is mainly ascribed to the beneficial pre-coating of Ce–ZrO₂ resulting in the existence of stable NiO _x species, a strong interaction between Ni and the support, and an abundance of mobile oxygen species in itself. TPR results further confirmed that NiO _x formation was more favorable than NiO or NiAl₂O₄ formation and further results suggested the existence of strong metal-support interaction (SMSI) between Ni and the support. Some of the important factors to optimize the CDR of methane such as reaction temperature, space velocity, feed CO₂/CH₄ ratio and H₂O and/or O₂ addition were also examined.     

Efficient Transformation of Furfuryl Alcohol Into Ethyl Levulinates via Alcoholysis Reaction Catalyzed by SnO2/H-Mordenite Catalyst

Catalysis Surveys from Asia - Catalytic production of ethyl levulinate by alcoholysis of furfuryl alcohol with ethanol was investigated over H-mordenite supported Sn catalyst under atmospheric N2...     

Reductive amination of cyclohexanol/cyclohexanone to cyclohexylamine using SBA-15 supported copper catalysts

Amination of cyclohexanol was investigated in vapour phase over copper catalysts supported on mesoporous SBA-15. The different products identified during reductive amination of cyclohexanol reaction were cyclohexanone, cyclohexylamine, along with small amounts of N-Cyclohexylidinecyclohexylamine and dicyclohexylamine. Among several catalysts tested for the reductive amination, 5% Cu supported on SBA-15 exhibited better catalytic performance than other catalysts with 36% selectivity towards cylclohexylamine at 80% cyclohexanol conversion. The optimum reaction conditions employed to achieve the best catalyst performance were at 250 °C, 0.1 MPa of H₂/NH₃, TOS-10h. The active Cu sites, acidity of the catalyst, and effect of reaction parameters play a pivotal role in the reductive amination reaction. The prepared catalysts were characterized by XRD, BET, SEM, H₂-TPR and NH₃-TPD. The dispersion of Cu, particle size, and metal surface area (m²/g) calculated from pulse N₂O decomposition method. TPR findings reveal the presence of substantially dispersed copper oxide species at lower loadings which is easily reducible than the bulk copper oxide species found at higher Cu loadings. The acidity measurements by NH₃-TPD analysis suggest that the maximum acidic strength was obtained at 5 wt% copper on porous SBA-15, and decreased with Cu loadings. The catalytic properties are well in agreement with the findings of catalysts characterization.     

Characterization and catalytic functionalities of copper oxide catalysts supported on zirconia

A series of zirconia supported copper oxide catalysts with varying copper loadings (1.2-19.1 wt %) were prepared by impregnation method. The catalysts were characterized by X-ray diffraction, UV-visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR), and temperature-programmed desorption of CO2. Copper dispersion and metal area were determined by N2O decomposition method. X-ray diffraction patterns indicate the presence of crystalline CuO phase beyond 2.7 wt % of Cu on zirconia. UV-visible diffuse reflectance spectra suggest the presence of two types of copper species on the ZrO2 support. XPS peaks intensity ratio of Cu 2p3/2 and Zr 3d5/2 was compared with Cu dispersion calculated from N2O decomposition. TPR patterns reveal the presence of highly dispersed copper oxide at lower temperatures and bulk CuO at higher temperatures. The basicity of the catalysts was found to increase with Cu loading, and the activity of the catalysts was also found to increase with the increase in Cu loading up to 2.7 wt % Cu loading. The catalytic properties were evaluated for the dehydrogenation of cyclohexanol to cyclohexanone and were related to surface properties of the copper species supported on zirconia.     

Effect of support and cobalt precursors on the activity of Co/AlPO4 catalysts in Fischer–Tropsch synthesis

Cobalt supported on amorphous aluminum phosphate (Co/AlPO₄) catalysts were prepared by the impregnation method using three different cobalt precursors such as cobalt nitrate, acetate and chloride to elucidate the activity of Fischer–Tropsch synthesis. The use of AlPO₄ as a support for cobalt-based catalysts exhibits better catalytic performance during FTS reaction than the corresponding Co/Al₂O₃ catalyst. TPR results also suggest that the reducibility of the catalysts varies with the nature of cobalt precursors employed during the impregnation on AlPO₄ support. The Co/AlPO₄ catalyst prepared from cobalt nitrate shows higher CO conversion and C₈+ selectivity than the others due to the facile formation of homogeneous cobalt particles with proper electronic characters and high reducibility. Interestingly, all Co/AlPO₄ showed a growth of filamentous carbon initiated from the large mobile cobalt particles during the reaction. The differences in catalytic properties of Co/AlPO₄ are mainly attributed to the cobalt particle size, reducibility with different electronic states of metallic cobalt, pore diameter of AlPO₄ and formation of filamentous carbon.