Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

VISUAL PIGMENTS—10. SPECTROSCOPY AND PHOTOPHYSICAL DYNAMICS OF RETINOL AND RETINYL ETHER

Abstract— The absorption and emission spectra, lifetimes and quantum yields of all-trans retinol have been examined as a function of solvent and temperature. In addition, the spectroscopy of retinyl ether and 2 other polyene alcohols have been determined. Based on the results obtained, we conclude that the singlet excited state of retinol and retinyl cther is of a forbidden character and of the type loosely called ¹A^-_g. Retinol forms a dimer in an alkane solvent when cooling from 298 to 77 K. A general structure for the dimer is proposed.     

Polyaddition reaction of biscarbodiimides. II. Synthesis of polyguanidines by polyaddition reaction of biscarbodiimides with diamines

A series of polyguanidines was prepared by the polyaddition reaction of biscarbodiimides with diamines. The polyaddition reaction was carried out in solution. The polymers thus obtained had intrinsic viscosities up to 0.84 and molecular weights up to 15000. The structure of the polymers was identified by comparison of their infrared spectra with those of model compounds, elementary analysis, and a study of the reaction conditions. Thermogravimetric study indicated that the polyguanidines decomposed over 170°C under nitrogen. The polyguanidines were highly resistant to hydrolytic degradation by strong acid or alkali. The polyguanidines had basic groups and formed stable hydrochloric salts when they were treated with hydrochloric acid.     

Intramolecular photoreactions of 6-(ω-alkenyl)-4-methoxy-2-pyrones

6-(ω-Alkenyl)-2-pyrones 3a-c and 8a, b were prepared and the photochemical reactions were investigated. Photosensitized reactions of 3b, c gave intramolecular [2+2]-cycloadducts 11b, c as tricyclic lactones, site-and regio-specifically. They are not frontier-orbital-controlled adducts. On the other hand, 3a, 8a, b afforded cyclobutenecarboxylic acids, 10a, 14a, b , respectively. The end-ester group at the side-chain is thought not to be effective for the intramolecular phptoaddition.     

Crystal structures of n-alkanes with branches of different size in the middle

We synthesized four branched n-alkane samples C35-C1, C35-C4, C35-C6, and C35-C4Ph with the same number of carbons as the main chain, n = 35, to which the methyl, butyl, hexyl, and butyl phenyl groups were respectively attached at the middle, and also the corresponding linear homologue of C35, and studied their crystalline structures from DSC, IR, and Raman spectroscopy, X-ray diffraction measurement, and computer simulation. Solid-solid phase transitions characteristic of linear alkane C35 are not observed for any branched alkanes, and their melting temperatures Tm are lowered to 325.2, 318.5, 314.3, and 314.1K, respectively. Main chains of branched alkane molecules are not folded, irrespective of length and chemical structure of branches, but are extended to take the planar zigzag form in the solid state. The branches of C35-C4 and C35-C6 are also aligned inside the crystal in the extended form. Data analyses on solution-grown crystallized samples reveal that, with increasing the branch length, their crystal structures transform from polymorphic forms of the orthorhombic (P2(1)2(1)2(1)) and the triclinic (P) for C35-C1 and C35-C4 to the unique triclinic form for C35-C6 and C35-C4Ph, so as to minimize extra surface energy invoked by introduction of long branches.     

Stereochemistry in cationic polymerization of alkenyl ethers. V. Stereochemistry of acetal additions as model reactions for the polymerization of alkenyl ethers

Acetal additions to β-substituted vinyl ethers having a variety of substituents (alkenyl ethers) were stereochemically investigated as model reactions for their cationic polymerization. The reactions catalyzed by BF₃O(C₂H₅)₂ in CH₂Cl₂ at O°C gave 1:1 adducts, the steric structure of which was determined by means of ¹³C-NMR spectroscopy. trans-Alkenyl ethers always gave adducts with a single structure stereospecifically, indicating that the intermediate carbocation attacks a trans-alkenyl ether from a definite direction independent of the bulkiness of substituents. On the other hand, cis-alkenyl ethers formed adducts with two steric structures, and the direction of cation addition was found to depend on the bulkiness of the alkoxy group involved. The above trends were in agreement with the results for poly(alkenyl ether)s and allowed detailed discussion of the stereochemistry of the propagation processes in alkenyl ether polymerizations.     

Mechanism of stereoregular polymerization of butadiene by homogeneous Ziegler-Natta catalysts. I. Effects of the species of transition metals

Butadiene was polymerized by catalysts of the type: metal acetylacetonate (metal: Ti to Ni in the periodic table)–triethylaluminum–aluminum halide, with various ratios of triethylaluminum to aluminum halide. The minimum cis content was observed with vanadium catalyst in all cases, while the minimum polymer yields were observed with the iron and the manganese catalysts. These transition metal effects are discussed in terms of the crystal field theory, and it is suggested that the electrostatic interaction between the nearly nonbonding electrons of transition metal atom and a butadiene molecule or a growing end of the polymeric chain plays an important role in the stereoregular polymerization of butadiene by homogeneous Ziegler-Natta catalysts.     

Proton-block strategy for the synthesis of oligodeoxynucleotides without base protection,capping reaction,and P-N bond cleavage reaction

A new N-unprotected phosphoramidite method called the "proton-block" approach was developed for the chemical synthesis of oligodeoxynucleotides based on the hitherto simplest and rational principle of acid-base reactions. This concept involves protection of the nucleobases of deoxycytidine and deoxyadenosine with "protons" to convert them to unreactive protonated bases during condensation by use of promoters having pK(a) values lower than 2.8. This strategy was applied to the synthesis of d[CpT] and d[ApT] to check the side reactions associated with the base residues. In this "proton-block" method, 5-nitrobenzimidazolium triflate (NBT) was found to be the best promoter, and THF was superior to CH(3)CN as the solvent so that the concomitant detritylation due to the inherent acidity of the promoter could be greatly suppressed. Application of this strategy to the solid-phase synthesis gave d[CpT], d[ApT], d[ApA], d[CpC], and d[GpT] as almost single peaks in HPLC analysis. Similarly, d[ApApApT] and d[CpCpCpT] were successfully synthesized without significant side reactions. Finally, d[CpCpCpCpCpCpT] and d[ApApApApApApT] were obtained as the main products. In the case of a longer oligomer, d[CpApGpTpCpApGpTpCpApGpT], a mixed solvent of CH(3)CN-N-methylpyrrolidone (1:1, v/v) was superior to THF so that the desired oligodeoxynucleotide could be isolated in a satisfactory yield. These results suggest that DNA synthesis can be carried out simply by using the protonated bases at the oligomer level not only without base protection but also without the capping reaction and the posttreatment of branched chains with MeOH-benzimidazolium triflate that previously was requisite. It is concluded that most of the reactions and solvent effects involved in this strategy can be explained in terms of simple acid-base reactions. Some problems associated with the previous posttreatment are also discussed with our own results.