The required sample size in measuring oblique incidence absorption coefficient Experimental study

It is an important issue to clarify the minimum required size of a specimen for the accurate measurement of oblique incidence absorption coefficient. Investigation is made on the basis of experimental studies in a laboratory, using Aoshima's time stretched pulse technique. Measurements are carried out for glass fiber with thickness of 50 and 100 mm as highly absorbing materials and for ceramic with a thickness of 52 mm as relatively low absorbing material. The tested surface areas range from 0.0625 to 42 m² for glass fiber and from 0.1563 to 39.168 m² for ceramics. The absorption coefficients are determined at incidence angles from 0 to 45° in increments of 15°. With consideration of an active surface bounded by ellipse orbit, the minimum required surface area is 16 m² with a ratio of length to width of about 1.25. This value is twice the area size of the active surface, which is calculated from the geometry of source and microphone, and the width of the temporal window.     

Potential-dependent structure of the interfacial water on the gold electrode

Doubly tunable sum frequency generation (SFG) spectra demonstrate that the water molecules at gold/electrolyte interface change their orientation with applied potential. At negative potentials, water molecules in the double layer align with their oxygen atom pointing to the solution. As potential became positive to be close to the potential of zero charge (PZC), the SFG signal decreased, suggesting the OH groups of the water molecule are either in random orientation or parallel to the electrode. As potential became more positive than the PZC, the SFG signal increased again with the oxygen-up orientation as same as in the negative potential region, indicating that water molecules interact with the adsorbed sulfate anions. The peak position of the SFG spectra indicates a relatively disordered state of water molecules at the gold electrode surface, in contrast to the previously observed ice-like structure of water at electrolyte/oxide interfaces.     

Stereoselective synthesis of CF3-substituted aziridines by Lewis acid-mediated aziridination of aldimines with diazoacetates

Treatment of trifluoroacetaldehyde N,O-acetal with diazoacetate in the presence of a Lewis acid furnished CF₃-substituted aziridinecarboxylates in good yields. Both cis and trans isomers were obtained stereoselectively by the proper choice of the ester substituents. Use of a chiral diazoacetate derived from (R)-pantolactone led to highly diastereoselective aziridination (94% de).     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Silicon hydrides and nickel complexes : III. Hydrosilylation of olefins with dichloro[1,2-bis-(dimethylphosphino)-1,2-dicarba-closo-dodecaborane]-nickel(II) as catalyst

The hydrosilylation of olefins catalyzed by nickel(II) chloride complexed with 1,2-bis(dimethylphosphino)-1,2-dicarba-closo-dodecaborane produces terminal and internal adducts in comparable amounts. This unusual feature of the reaction is explained in terms of the electron-accepting nature of the carboranyl group.     

Syntheses and electrical conductivity of polyamides containing tetrathiafulvalene moieties in the main chain

Novel polyamides that contain tetrathiafulvalene (TTF) moieties were synthesized by direct polycondensation of Δ^2,2′ -bi-1,3-dithiole-4,4′(5′)-dicarboxylic acid with aromatic diamines in the presence of triphenylphosphine, hexachloroethane, and pyridine. Complexes of these polyamides with bromine were TTF cation radical () salts which resulted from the charge transfer of TTF moieties to bromine. The electrical conductivity of undoped polyamides increased with a decrease in diamine length. By doping the bromine the conductivity of the polyamides was enhanced by 3–5 orders of magnitude and reached 10^?5–;10^?9S cm^?1. Maximum conductivity was observed at the doping ratio of [Br]/[repeat unit] < 1. The electrical conduction in the bromine complexes may be attributed to the hopping of odd electrons of between TTF moieties.     

Stereoselective synthesis of tetrasubstituted (Z)-alkenes from aryl alkyl ketones utilizing the Horner-Wadsworth-Emmons reaction

Tetrasubstituted (Z)-alkenes were readily prepared through the Horner-Wadsworth-Emmons reactions of methyl 2-[bis(2,2,2-trifluoroethyl)phosphono]propionate with aryl alkyl ketones by employing Sn(OSO(2)CF(3))(2) and N-ethylpiperidine.     

Electrochemical control of CO/NO ligand exchange in a triruthenium cluster monolayer assembled on a gold electrode surface

A highly selective ligand exchange reaction is realized in the self-assembled monolayer (SAM) of a triruthenium cluster on a gold electrode surface under precise electrochemical potential control. CO as well as NO molecules, which are known to play key roles in many chemical, biological, and environmental systems, can be efficiently introduced into the SAM by electrochemically tuning the electronic state of the Ru site. These unique surface reactions are more convenient and efficient than conventional ligand exchange reactions in solution and could be used for the elucidation of the electron-transfer mechanism in a biological system as well as in the development of molecular sensors and devices.     

Effect of polycondensation methods on molecular weight distribution of nylon 610

Polycondensation methods greatly influence the molecular weight distribution of poly(hexamethylene sebacamide) (nylon 610) as determined by gel permeation chromatography (GPC). The ratio of weight average molecular weight to number average molecular weight (M_w/M_n) was used as a measure for estimating the molecular weight distribution. The M_w/M_n ratios of nylon 610 obtained from melt, solid phase, and high temperature polycondensation methods were 2 to 3.5, which were expected values for the most probable distribution. However, those for polymers obtained from the direct polycondensation in the presence of triphenylphosphine, interfacial polycondensation and low temperature polycondensation using an acid chloride varied over a wide range from 3.5 to 8.5. The effect of the kind of organic solvents in the interfacial method on the M_w/M_n ratios was especially large, and the molecular weight distribution could be controlled to some extent by selecting an appropriate solvent.