A Highly Accurate Refractive Index Sensor with Two Operation Modes Based on Photonic Crystal Ring Resonator

A 2D hole‐type hexagonal lattice photonic crystal is utilized, herein, to detect the refractive index change of the material infiltrated into the designed circular sensing area which also resembles a ring resonator. The accuracy of the detection process is enhanced considering the simultaneous shift of the resonance wavelengths and the intensity modulation which occur in two separate spectral regions. The presented structure has the ability to detect liquids, material concentrations in fluids and gases having refractive indices in the range of n = 1–2 with sensitivity and quality factor of 61 nm/RIU and 3000, respectively, for resonance‐wavelength‐shift‐based operation. The detection range of n = 1–1.4 with the sensitivity of S = 0.69 NI/RIU is achieved for the intensity‐based measurement and the results show good linearity in the operating range.     

Silver chloride supported on Vitamin B1 -Organometallic magnetic catalyst: synthesis,density functional theory study and application in A3-coupling reactions

A highly efficient Fe₃O₄@VitB₁–Ag(I) magnetic catalyst has been obtained using surface modification of Fe₃O₄. To this end, silver chloride was immobilized on Fe₃O₄ nanoparticles via vitamin B₁ biomolecules. The synthesized biocompatible magnetic catalyst was applied in an A³-coupling reaction in the presence of aldehyde, amine and phenyl acetylene under solvent-free conditions and afforded the desired products in excellent yields. Also, interactions between metal and ligand in the Fe₃O₄@VitB₁–Ag(I) were studied using theoretical calculations.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

Very sensitive differential pulse adsorptive stripping voltammetric determination of 4-nitrophenol at poly (diphenylamine)/multi-walled carbon nanotube-β-cyclodextrin-modified glassy carbon electrode

In this work, a glassy carbon electrode (GCE) modified with poly (diphenylamine)/multi-walled carbon nanotubes-β-cyclodextrin (PDPA/MWCNT-β-CD) film was constructed and used for the determination of 4-nitrophenol (4-NP). Diphenylamine was successfully electropolymerised onto MWCNT-β-CD-modified GCE by cyclic voltammetry in monomer solution and 5 mol L^?1 H₂SO₄. The surface morphology of PDPA/MWCNT-β-CD film was characterised using scanning electron microscopy and electrochemical impedance spectroscopy. After adsorption of 4-NP on PDPA/MWCNT-β-CD at 0.2 V for 150 s, it showed a well-defined reduction peak in phosphate buffer solution at pH = 7. The PDPA/MWCNT-β-CD film enhanced the reduction peak current due to the complex formation between β-CD and 4-NP, presence of conductive polymer film as electron transfer mediator and also ability of MWCNTs for strong adsorptive and catalytic effect. Peak current increased linearly with 4-NP concentration in the range of 0.1 to 13.9 µg L^?1. The detection limit was obtained as 0.02 µg L^?1, which is better than other reported detection limits for the determination of 4-NP. The results showed that modified electrode has good sensitivity and selectivity. This sensor was used for the determination of 4-NP in water samples.     

Artificial brain structure-based modeling to predict the photo-thermal conversion performance of graphene nanoplatelets nanofluid using experimental data

Journal of Thermal Analysis and Calorimetry - Radiation is one of the means of thermal energy and heat transfer. Therefore, investigating and determining materials’ abilities to absorb energy...     

Composite Polybenzimidazole Membrane with High Capacity Retention for Vanadium Redox Flow Batteries

Currently, energy storage technologies are becoming essential in the transition of replacing fossil fuels with more renewable electricity production means. Among storage technologies, redox flow batteries (RFBs) can represent a valid option due to their unique characteristic of decoupling energy storage from power output. To push RFBs further into the market, it is essential to include low-cost materials such as new generation membranes with low ohmic resistance, high transport selectivity, and long durability. This work proposes a composite membrane for vanadium RFBs and a method of preparation. The membrane was prepared starting from two polymers, meta-polybenzimidazole (6 μm) and porous polypropylene (30 μm), through a gluing approach by hot-pressing. In a vanadium RFB, the composite membrane exhibited a high energy efficiency (~84%) and discharge capacity (~90%) with a 99% capacity retention over 90 cycles at 120 mA·cm⁻², exceeding commercial Nafion^® NR212 (~82% efficiency, capacity drop from 90% to 40%) and Fumasep^® FAP-450 (~76% efficiency, capacity drop from 80 to 65%).     

Mild,four-component synthesis of 6-amino-4-aryl-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles catalyzed by titanium dioxide nano-sized particles

A convenient and efficient solvent-free procedure is described for preparation of 6-amino-4-aryl-3-methyl-1,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles by four-component reaction of hydrazine hydrate, ethyl acetoacetate, aryl aldehyde, and malononitrile in the presence of a catalytic amount of titanium dioxide nano-sized particles. Short reaction times, high yields under ambient conditions, simple reaction, clean work-up, and reusability of the nano heterogeneous catalyst are the advantages of this method.