Quantitative electron probe microanalysis for the characterization of thin carbon-boron layers in fusion devices

Summary The first wall of the fusion device TEXTOR at the Forschungszentrum Jülich has been coated in situ with an amorphous hydrogen rich carbon/boron film (a-C/B:H) which reduces plasma impurities caused by the plasma surface interaction. The results of the coating process of the 35 m² large inner wall surface have been controlled by a recently developed modification of the quantitative electron probe microanalysis, which has been applied to 12 samples from specified positions inside the tokamak. The quantification itself is based on a Monte Carlo simulation of electron trajectories providing very accurate results for X-ray intensities emitted by elements present in the electron bombarded sample. The Monte Carlo results are used in the present work to calibrate the measured X-ray intensities emitted by boron and carbon from the a-C/B:H layers deposited on pure silicon substrates. As a result the total deposited mass of the layer per area unit as well as the composition of the layers (except hydrogen) could be determined very accurately. The relative errors were less than 7%. The limit of detectability were found to be in the range of one monolayer for boron as well as for carbon.     

Der Abbau des Insektizides GS 13005 in der Ratte. Strukturaufklärung der wichtigsten Metabolite [1]

The structures of the essential metabolites which are excreted by the rat after oral application of GS 13005 (O,O-dimethyl-S-[(2-methoxy-1,3,4-thiadiazole-5(4H)-one-4-yl)-methyl] dithiophosphate) have been elucidated. The product of final oxidation, CO₂, was found to be the main metabolite (up to 36% of the dose applied). Among the degradation products excreted in the urine (up to 45% of the dose applied) the two most important were isolated. They are 4-methylsulfinylmethyl and 4-methylsulfonylmethyl derivatives respectively of the intact 2-methoxy-1,3,4-thiadiazole-5-one heterocycle (metabolites III and II, in amounts of 20–25% and 5–7% of the dose applied, respectively). These metabolites originate by methylation and subsequent oxidation from the mercaptomethyl derivative liberated after hydrolysis of the P S bond of the dithiophosphoric acid ester.     

Stabilitätsungleichungen für Diskretisierungen von Randwertaufgaben gewöhnlicher Differentialgleichungen

Summary We consider two-point boundary value problems for linear differential equations (of ordern). The main part consists in proving stronger apriori estimates for (mn–1) using discreteL ₁-norms of the involved right-hand sides; thus extending known results for discreteL _p -norms with 2p. These estimates are the main tool in proving sharp estimates for the error \y–y _h \ _h, as well asfor \P _y –P _h y _h \ _h, , whereP _h denotes a consistent approximation of the differential operatorP of ordermn–1, in terms of the discretL ₁-norm of the truncation error. By means of an interpolation technique these estimates yield a correct estimate of the order of convergence, also in case that the solution satisfies locally some Lipschitz-conditions.     

The Morphology of Liquid-Crystalline Polymers and the Possible Consequences for their Rheological Behaviour

Abstract

Polymer liquid crystals can occur as polydomain materials where the domain size may be tens of microns. While the material within each domain may be characterized by a common order parameter, the directors of the domains can be more or less randomly distributed. Since the transition from polydomain to monodomain material only involves the removal of grain boundaries and the alignment of directors, the free energy change must necessarily be small. Such a transition can readily be achieved, therefore, by the action of any external field: electrical, magnetic, stress or surface. In this work optical photomicrographs of polymeric liquid crystals with widely varying and in some cases well controlled morphologies are presented. Probable dependence of rheological behaviour on morphology is also discussed. Such dependence is expected to be considerable under certain conditions. Due to experimental and sample limitations, however, direct correlations of rheology and morphology are sparse. Morphological consequences for the rheology of liquid-crystalline materials can be exemplified by the following possibilities. In contrast to the case of isotropic melts, wall effects can be non-negligible. Zero shear rate rheological parameters are not expected to be uniquely defined quantities since the domain sizes are large and the director may not be effectively averaged over typical sample dimensions. Non-zero shear-rate measurements of rheological parameters is effected by the propensity of: (1) individual domain directors to align under the influence of a stress field and (2) flow alignment to dominate surface-induced alignment above some critical shear rate. The effects might be manifested by a non-newtonian regime as well as yield stress behaviour and thixotropy. The kinetics of relaxation from mono- to poly-domain material has implications for the dynamic response and rheological hysterises of the material.     

The ABC of Insulin: The Organic Chemistry of a Small Protein

Insulin is a small protein crucial for regulating the blood glucose level in all animals. Since 1922 it has been used for the treatment of patients with diabetes. Despite consisting of just 51 amino acids, insulin contains 17 of the proteinogenic amino acids, A- and B-chains, three disulfide bridges, and it folds with 3 α-helices and a short β-sheet segment. Insulin associates into dimers and further into hexamers with stabilization by Zn²⁺ and phenolic ligands. Selective chemical modification of proteins is at the forefront of developments in chemical biology and biopharmaceuticals. Insulin's structure has made it amenable to organic and inorganic chemical reactions. This Review provides a synthetic organic chemistry perspective on this small protein. It gives an overview of key chemical and physico-chemical aspects of the insulin molecule, with a focus on chemoselective reactions. This includes N-acylations at the N-termini or at Lys^B29 by pH control, introduction of protecting groups on insulin, binding of metal ions, ligands to control the nano-scale assembly of insulin, and more.     

Compact fibre-laser-pumped Ho:YLF oscillator–amplifier system

We developed a compact Ho:YLF oscillator–amplifier system in a novel setup to utilise the unpolarised pump power from a fibre laser efficiently, and produced 21.3 mJ at 1 kHz, with an M ² better than 1.1. The amplified energies agreed well with the predicted values from a two dimensional rotational symmetric amplifier model that we developed. The model considers upconversion losses and ground-state depletion, as well as the spatial distribution of the pump beam.     

A Simple Strategy to Eliminate Hexosylation Bias in the Relative Quantification of N‐Glycosylation in Biopharmaceuticals

N‐glycosylation may affect the safety and efficacy of biopharmaceuticals and is thus monitored during manufacturing. Mass spectrometry of the intact protein is increasingly used to reveal co‐existing glycosylation variants. However, quantification of N‐glycoforms via this approach may be biased by single hexose residues as introduced by glycation or O‐glycosylation. Herein, we describe a simple strategy to reveal actual N‐glycoform abundances of therapeutic antibodies, involving experimental determination of glycation levels followed by computational elimination of the “hexosylation bias”. We show that actual N‐glycoform abundances may significantly deviate from initially determined values. Indeed, glycation may even obscure considerable differences in N‐glycosylation patterns of drug product batches. Our observations may thus have implications for biopharmaceutical quality control. Moreover, we solve an instance of the problem of isobaricity, which is fundamental to mass spectrometry.